Filter by
Holding Screw Thread Size
Thread Size
DFARS Compliance
Holding Screws for Toggle Clamps
With Rubber
Fixed
Flat Tip
Fixed
Flat Tip
With Rubber
Fixed
Cone Tip
Fixed
Cone Tip
With Rubber
Swiveling
Flat Tip
Swiveling
Flat Tip
With Steel
Fixed
Flat Tip
Fixed
Flat Tip
With Steel
Swiveling
Flat Tip
Swiveling
Flat Tip
With Stainless
Steel Fixed
Flat Tip
Steel Fixed
Flat Tip
Replace worn screws or customize your clamps.
For technical drawings and 3-D models, click on a part number.
Holding Screws | Steel | Stainless Steel | |||||
|---|---|---|---|---|---|---|---|
| Thread Size  | Thread Lg. | Tip Dia. | Overall Lg. | Each | Each | ||
With Rubber Fixed Flat Tip | |||||||
| 8-32 | 3/4" | 9/16" | 1" | 0000000 | 00000 | 0000000 | 00000 |
| 8-32 | 1" | 9/16" | 1 1/4" | 0000000 | 0000 | 000000 | 00 |
| 10-32 | 1" | 9/16" | 1 3/8" | 0000000 | 0000 | 0000000 | 0000 |
| 1/4"-20 | 5/8" | 11/16" | 1" | 0000000 | 0000 | 000000 | 00 |
| 1/4"-20 | 1 1/8" | 5/8" | 1 5/8" | 0000000 | 0000 | 0000000 | 0000 |
| 1/4"-20 | 1 1/8" | 11/16" | 1 1/2" | 0000000 | 0000 | 000000 | 00 |
| 1/4"-20 | 1 5/8" | 5/8" | 2 1/8" | 0000000 | 0000 | 0000000 | 0000 |
| 1/4"-20 | 1 3/4" | 19/32" | 1 29/32" | 000000 | 00 | 0000000 | 00000 |
| 5/16"-18 | 1 5/8" | 13/16" | 2 1/4" | 0000000 | 0000 | 0000000 | 0000 |
| 5/16"-18 | 2 3/8" | 13/16" | 3" | 0000000 | 0000 | 0000000 | 0000 |
| 3/8"-16 | 2 3/8" | 1" | 3 1/4" | 0000000 | 0000 | 0000000 | 00000 |
| 3/8"-16 | 2 1/2" | 7/8" | 3 1/2" | 0000000 | 0000 | 000000 | 00 |
| 3/8"-16 | 4 7/8" | 1" | 5 3/4" | 0000000 | 0000 | 000000 | 00 |
| 1/2"-13 | 2 3/4" | 1 3/16" | 3 7/8" | 0000000 | 0000 | 000000 | 00 |
| 5/8"-11 | 3 5/8" | 1 3/8" | 5" | 0000000 | 00000 | 000000 | 00 |
| M4 | 13/16" | 5/16" | 7/8" | 0000000 | 0000 | 000000 | 00 |
| M4 | 1 3/16" | 5/16" | 1 1/4" | 0000000 | 0000 | 000000 | 00 |
| M5 | 1" | 3/8" | 1 1/8" | 0000000 | 0000 | 000000 | 00 |
| M5 | 1 3/8" | 3/8" | 1 9/16" | 0000000 | 0000 | 000000 | 00 |
| M6 | 5/8" | 11/16" | 1" | 0000000 | 0000 | 000000 | 00 |
| M6 | 1 3/16" | 5/8" | 1 3/4" | 0000000 | 0000 | 000000 | 00 |
| M6 | 1 5/8" | 5/8" | 2 1/8" | 0000000 | 0000 | 000000 | 00 |
| M8 | 1 3/8" | 13/16" | 2 1/8" | 0000000 | 0000 | 000000 | 00 |
| M8 | 1 3/4" | 7/8" | 2 1/2" | 0000000 | 0000 | 000000 | 00 |
| M8 | 2 5/8" | 13/16" | 3 3/8" | 0000000 | 0000 | 000000 | 00 |
| M10 | 2 3/16" | 1" | 3 1/8" | 0000000 | 0000 | 000000 | 00 |
| M10 | 3 3/4" | 1" | 4 3/4" | 0000000 | 0000 | 000000 | 00 |
| M12 | 2 7/8" | 1 3/16" | 4 1/8" | 0000000 | 00000 | 000000 | 00 |
With Rubber Fixed Cone Tip | |||||||
| 10-32 | 1" | 9/16" | 1 1/2" | 0000000 | 0000 | 000000 | 00 |
| 1/4"-20 | 1 5/8" | 3/4" | 2 1/4" | 0000000 | 0000 | 000000 | 00 |
| 5/16"-18 | 2 3/8" | 3/4" | 3" | 0000000 | 0000 | 000000 | 00 |
| 5/16"-18 | 4 3/4" | 3/4" | 5 1/2" | 0000000 | 0000 | 000000 | 00 |
| 3/8"-16 | 2 1/2" | 7/8" | 3 1/2" | 0000000 | 0000 | 000000 | 00 |
With Rubber Swiveling Flat Tip | |||||||
| 1/4"-20 | 1 5/8" | 1" | 2 5/8" | 0000000 | 00000 | 000000 | 00 |
| 5/16"-18 | 2" | 1 1/2" | 3" | 0000000 | 00000 | 000000 | 00 |
| 3/8"-16 | 2 1/2" | 2" | 3 5/8" | 0000000 | 00000 | 000000 | 00 |
With Steel Fixed Flat Tip | |||||||
| 8-32 | 1" | 1/4" | 1 3/32" | 0000000 | 0000 | 000000 | 00 |
| 5/16"-18 | 1 3/4" | 1/2" | 2" | 00000000 | 0000 | 000000 | 00 |
With Steel Swiveling Flat Tip | |||||||
| 1/4"-20 | 1 5/8" | 1/2" | 2 1/2" | 0000000 | 0000 | 000000 | 00 |
| 5/16"-18 | 2" | 9/16" | 2 3/4" | 0000000 | 0000 | 000000 | 00 |
| 3/8"-16 | 2" | 5/8" | 3 1/8" | 0000000 | 0000 | 000000 | 00 |
| 3/8"-16 | 2 1/2" | 5/8" | 3 3/8" | 0000000 | 0000 | 000000 | 00 |
| 1/2"-13 | 3 1/2" | 1" | 4 5/8" | 0000000 | 00000 | 000000 | 00 |
With Stainless Steel Fixed Flat Tip | |||||||
| 10-32 | 1" | 5/16" | 1 1/8" | 000000 | 00 | 0000000 | 0000 |
| M4 | 13/16" | 5/16" | 29/32" | 000000 | 00 | 00000000 | 0000 |
Tips for Toggle Clamp Holding Screws
Rounded Push On
Flat Push On
Flat Screw On
Cone Screw On
Attach one of these nonmarring tips to prevent a metal holding screw from damaging workpiece surfaces.
For technical drawings and 3-D models, click on a part number.
Overall | |||||
|---|---|---|---|---|---|
| For Holding Screw Thread Size | Dia. | Lg. | Material | Each | |
Rounded Push On | |||||
| 8-24, 8-32 | 13/32" | 5/16" | Plastic | 0000000 | 00000 |
| 1/4"-20, 1/4"-28, M6 | 7/16" | 7/16" | Rubber | 0000000 | 0000 |
| 3/8"-16, 3/8"-24, M10 | 23/32" | 7/8" | Rubber | 0000000 | 0000 |
Flat Push On | |||||
| 1/4"-20, 1/4"-28 | 19/32" | 13/32" | Plastic | 0000000 | 000 |
| 5/16"-18, 5/16"-24, M8 | 3/4" | 1/2" | Rubber | 0000000 | 0000 |
| 3/8"-16, 3/8"-24 | 7/8" | 17/32" | Rubber | 0000000 | 0000 |
Flat Screw On | |||||
| 1/4"-20 | 13/16" | 11/16" | Rubber | 0000000 | 0000 |
| 5/16"-18 | 13/16" | 11/16" | Rubber | 0000000 | 0000 |
| 3/8"-16 | 13/16" | 7/8" | Rubber | 0000000 | 0000 |
Cone Screw On | |||||
| 1/4"-20 | 13/16" | 3/4" | Rubber | 0000000 | 0000 |
| 5/16"-18 | 13/16" | 3/4" | Rubber | 0000000 | 0000 |
| 3/8"-16 | 13/16" | 15/16" | Rubber | 0000000 | 0000 |
Swiveling Tips for Screws and Threaded Studs
Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.
For technical drawings and 3-D models, click on a part number.
| Dia. | Ht. | Load Capacity, lbs. | Thread Size | Range of Motion | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 1/2" | 5/8" | 360 | 10-32 | 20° | 0000000 | 000000 |
| 5/8" | 5/8" | 3,900 | 1/4"-20 | 10° | 0000000 | 0000 |
| 11/16" | 3/4" | 5,900 | 5/16"-18 | 10° | 0000000 | 0000 |
| 3/4" | 13/16" | 6,400 | 3/8"-16 | 10° | 0000000 | 0000 |
| 7/8" | 15/16" | 7,000 | 1/2"-13 | 10° | 0000000 | 0000 |
| 1" | 1" | 10,000 | 5/8"-11 | 10° | 0000000 | 0000 |
| 1 1/4" | 1 3/8" | 13,500 | 3/4"-10 | 10° | 0000000 | 0000 |
| 1 5/8" | 1 13/16" | 18,750 | 1"-8 | 10° | 0000000 | 00000 |
| 13mm | 16.5mm | 360 | M5 | 20° | 0000000 | 00000 |
| 13mm | 16.5mm | 520 | M6 | 20° | 0000000 | 00000 |
| 16mm | 21mm | 930 | M8 | 20° | 0000000 | 00000 |
| 19mm | 23mm | 1,455 | M10 | 20° | 0000000 | 00000 |
| 22mm | 25.5mm | 1,870 | M12 | 20° | 0000000 | 00000 |
| 25mm | 29.5mm | 3,130 | M16 | 20° | 0000000 | 00000 |
| 32mm | 36mm | 4,720 | M20 | 20° | 0000000 | 00000 |
Stainless Steel | ||||||
| 5/8" | 5/8" | 3,900 | 1/4"-20 | 10° | 0000000 | 0000 |
| 11/16" | 3/4" | 5,900 | 5/16"-18 | 10° | 0000000 | 0000 |
| 3/4" | 13/16" | 6,400 | 3/8"-16 | 10° | 0000000 | 00000 |
| 7/8" | 15/16" | 7,000 | 1/2"-13 | 10° | 0000000 | 00000 |
| 1" | 1" | 10,000 | 5/8"-11 | 10° | 0000000 | 00000 |
| 1 1/4" | 1 3/8" | 13,500 | 3/4"-10 | 10° | 0000000 | 00000 |
| 1 5/8" | 1 13/16" | 18,750 | 1"-8 | 10° | 0000000 | 00000 |
Nonmarring Swiveling Tips for Screws and Threaded Studs
The contact area is covered in plastic to protect soft metal and polished surfaces. Attach these tips to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.
For technical drawings and 3-D models, click on a part number.
| Dia. | Ht. | Load Capacity, lbs. | Thread Size | Range of Motion | Tip Material | Each | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| 5/8" | 5/8" | 3,900 | 1/4"-20 | 10° | Acetal Plastic | 00000000 | 00000 |
| 11/16" | 3/4" | 5,900 | 5/16"-18 | 10° | Acetal Plastic | 00000000 | 0000 |
| 3/4" | 13/16" | 6,400 | 3/8"-16 | 10° | Acetal Plastic | 00000000 | 0000 |
| 7/8" | 15/16" | 7,000 | 1/2"-13 | 10° | Acetal Plastic | 00000000 | 00000 |
| 1" | 1" | 10,000 | 5/8"-11 | 10° | Acetal Plastic | 00000000 | 00000 |
| 1 1/4" | 1 3/8" | 13,500 | 3/4"-10 | 10° | Acetal Plastic | 00000000 | 00000 |
| 1 5/8" | 1 13/16" | 18,750 | 1"-8 | 10° | Acetal Plastic | 00000000 | 00000 |
Stainless Steel | |||||||
| 5/8" | 5/8" | 3,900 | 1/4"-20 | 10° | Acetal Plastic | 0000000 | 00000 |
| 11/16" | 3/4" | 5,900 | 5/16"-18 | 10° | Acetal Plastic | 0000000 | 00000 |
| 3/4" | 13/16" | 6,400 | 3/8"-16 | 10° | Acetal Plastic | 00000000 | 00000 |
| 7/8" | 15/16" | 7,000 | 1/2"-13 | 10° | Acetal Plastic | 00000000 | 00000 |
| 1" | 1" | 10,000 | 5/8"-11 | 10° | Acetal Plastic | 00000000 | 00000 |
| 1 1/4" | 1 3/8" | 13,500 | 3/4"-10 | 10° | Acetal Plastic | 00000000 | 00000 |
| 1 5/8" | 1 13/16" | 18,750 | 1"-8 | 10° | Acetal Plastic | 00000000 | 00000 |
Swiveling Gripper Tips for Screws and Threaded Studs
Attach to the end of a screw or threaded stud—the serrated face swivels to grip uneven and angled surfaces. Also known as toggle and swivel-foot pads.
For technical drawings and 3-D models, click on a part number.
| Dia. | Ht. | Load Capacity, lbs. | Range of Motion | Mounting Hole Thread Size | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 5/8" | 5/8" | 3,900 | 10° | 1/4"-20 | 0000000 | 00000 |
| 11/16" | 3/4" | 5,900 | 10° | 5/16"-18 | 0000000 | 0000 |
| 3/4" | 13/16" | 6,400 | 10° | 3/8"-16 | 0000000 | 0000 |
| 7/8" | 15/16" | 7,000 | 10° | 1/2"-13 | 0000000 | 0000 |
| 1" | 1" | 10,000 | 10° | 5/8"-11 | 0000000 | 0000 |
| 1 1/4" | 1 3/8" | 13,500 | 10° | 3/4"-10 | 0000000 | 00000 |
| 1 5/8" | 1 13/16" | 18,750 | 10° | 1"-8 | 0000000 | 00000 |
Stainless Steel | ||||||
| 5/8" | 5/8" | 5,000 | 10° | 1/4"-20 | 00000000 | 00000 |
| 11/16" | 3/4" | 7,600 | 10° | 5/16"-18 | 00000000 | 00000 |
| 3/4" | 13/16" | 8,250 | 10° | 3/8"-16 | 00000000 | 00000 |
| 7/8" | 15/16" | 9,000 | 10° | 1/2"-13 | 00000000 | 00000 |
| 1" | 1" | 12,900 | 10° | 5/8"-11 | 00000000 | 00000 |
| 1 1/4" | 1 3/8" | 17,400 | 10° | 3/4"-10 | 00000000 | 00000 |
| 1 5/8" | 1 13/16" | 24,200 | 10° | 1"-8 | 00000000 | 00000 |
Swiveling Pads for C-Clamps
Replace a fixed clamping surface with a swiveling pad that compensates for uneven workpieces. No tools are required—pressure from the clamp pops the pad onto the end of the screw.
To determine which size you need, remove the existing jaw from your clamp and measure the ball diameter on your screw.
For technical drawings and 3-D models, click on a part number.
Clamping Surface | ||||||
|---|---|---|---|---|---|---|
| For Ball Dia. | Dia. | Ht. | Material | Overall Ht. | Each | |
| 0.305"-0.315" | 1" | 3/16" | 18-8 Stainless Steel | 1/2" | 0000000 | 00000 |
| 0.31"-0.32" | 1" | 3/16" | 18-8 Stainless Steel | 1/2" | 0000000 | 0000 |
| 0.36"-0.37" | 1" | 3/16" | 18-8 Stainless Steel | 1/2" | 0000000 | 0000 |
| 0.395"-0.4" | 1" | 1/8" | 18-8 Stainless Steel | 9/16" | 000000 | 0000 |
| 0.395"-0.4" | 1 1/4" | 1/8" | 18-8 Stainless Steel | 9/16" | 0000000 | 0000 |
| 0.452"-0.457" | 1 1/4" | 3/16" | 18-8 Stainless Steel | 7/8" | 0000000 | 0000 |
| 0.491"-0.501" | 1 1/4" | 1/4" | 18-8 Stainless Steel | 11/16" | 0000000 | 00000 |
| 0.57"-0.575" | 1 3/8" | 1/4" | 18-8 Stainless Steel | 1" | 0000000 | 0000 |