We will reply to your message within an hour.
Keep chips clear while tapping. Also known as gun taps, these have spiral-point flutes that push chips ahead of the tap and out of through holes.
Clear chips while tapping deep and hard-to-reach holes. These taps have an extra-long shank for extended reach.
Create oversized threads while keeping chips clear. These taps are sized for use in holes where the threads will shrink due to heat treatment or plating.
These taps cut left-hand threads while keeping chips clear.
The spiral flute design pulls chips back toward the tap, so chips won't accumulate in closed-end holes.
Drill holes and cut threads without switching tools.
With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers.
These taps are made of cobalt steel for higher strength and wear resistance than standard taps. Their flutes are designed to keep chips clear, so they don't need to be reversed to prevent buildup.
Coated with chromium carbide or titanium carbonitride (TiCN), these cobalt steel taps cut smoothly through soft material to produce accurate threads.
To tap nickel and other hard material, these cobalt steel taps have high cutting strength. Their flutes are designed to keep chips clear, so they don't need to be reversed to prevent buildup.
A high helix angle provides the cutting strength needed to tap threads in titanium. These cobalt steel taps have an open flute design that keeps chips clear, so they don't need to be reversed to prevent buildup.
Use these taps on hardened steel pipe and conduit.
Also known as interrupted-thread taps, these have extra space between the cutting threads, so large chips fall without packing and high amounts of lubricant can flow between the tap and the workpiece.
Drill and thread holes for pipe and conduit without switching tools.
The spiral flutes on these pipe and conduit taps keep chips clear by drawing them back out of the hole, so there's no need to reverse the tap while cutting threads.
Produce metric threads that meet Japanese Industrial Standards.
Sets include multiple tap sizes for threading different hole diameters.
Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes.
Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.