Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

Run chemicals through this tubing at temperatures between -100° F and 500° F.

This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.

A lightweight alternative to stainless steel, this tubing can handle extreme-pressure applications up to 1,000 psi.

An FEP liner gives this tubing better chemical resistance than any of our other firm tubing. It also provides a smooth interior for easy cleaning unrestricted flow.

Yarn reinforcement gives this hose good strength under pressure.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Step on this hose and it springs back to its original shape.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.

Use this durable, flexible hose in pressures up to 5,000 psi. Its braided construction gives it the highest pressure rating of any chemical hose in our offering.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

Transfer fuel oil with a hose that stays flexible in subzero conditions.

Easily access lines that move highly alcoholic or acidic wet food and beverages—this hose has flanged ends that join with quick-clamp fittings.

Transfer industrial gases in temperatures up to 1500° F with this hose.

Change the fuel source for your propane torch from a fuel cylinder to a propane tank. This hose is often used for extended-use applications, or when a propane tank can’t be moved.

The Yor-Lok fitting is also known as an instrumentation fitting. It has two sleeves (double ferrules) that bite into metal tubing for a strong seal.

The fittings are also known as an instrumentation fittings. They have two sleeves (double ferrules) that bite into metal tubing for a strong seal.

Avoid contamination as you supply a selective catalytic reduction (SCR) system with diesel exhaust fluid (DEF). Made of peroxide-cured EPDM with stainless steel fittings, this hose won’t leach contaminants into DEF.

Sealed vacuum insulation and a reflective barrier inside this hose maintains the temperature of liquids as cold as -325° F. Similar to a thermos, this prevents heat transfer, so the exterior of the hose won’t freeze or form condensation. The tube stems on each end slide into tube fittings on a freezer or other equipment in your plant or laboratory.

Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC).

This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand acids, solvents, and other harsh substances.

Also known as Victaulic pipe, this pipe has grooved ends that connect to fittings and flanges with a clamp, so you can access your line for routine maintenance. It is CPVC, which has excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

The inside of this pipe won’t leach contaminants into your line or accumulate particles—it’s polished to an ultra-smooth 12 Ra finish, which also makes them easy to clean. Made of polypropylene, it resists organic solvents, acids, and alkalis better than CPVC pipe.

Pipe meets UL 94 V-0 for flame retardance to delay the spread of flames to valuable equipment. It is made of PVDF, which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances.

Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it is NSF certified for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

Use this PTFE sleeving in applications where temperatures reach up to 500° F.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

Made of PPS plastic, this sleeving shields cable, hose, and pipe from oil, acids, and other chemicals. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Coated in acrylic, this sleeving holds up to rapid temperature changes, and it won’t break down from refrigerants, solvents, oil, or lubricants. Also known as hermetic sleeving, it’s designed to protect wires and hose inside air-tight motors, such as those used in air conditioners.

Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.

Resistant to diesel fuel, gasoline, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.

Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.

Made of PVC, this tubing resists chemicals, oil, and solvents. The adhesive lining creates a water-resistant seal when heated.

With thin walls, this tubing shrinks faster than other high-temperature tubing. It withstands up to 500° F.

Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.