UN-Compliant Tanks
Also known as an intermediate bulk container (IBC), these tanks are designed to safely ship liquids. They're tested to comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air. These regulations aim to prevent hazardous spills caused by accidents or rough package handling. Unlike round drums, these tanks can be tightly packed side-by-side to maximize your floor space. They’re protected by a rigid tubular steel cage. They can be stacked two high when tank is full and four high when empty.
Note: It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials and ensure the appropriate method for shipping.
For technical drawings and 3-D models, click on a part number.
Max. Fork | Drain | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., gal. | Wd. | Dp. | Ht. | Thick. | Fill Opening Dia. | Graduation Marks | No. of Entry Points for Forklifts | Wd. | Ht. | Pipe Size | Gender | Max. Temp., °F | Shipping Standard | Features | Each | |
White HDPE Plastic with Galvanized Steel Pallet | ||||||||||||||||
| 150 | 40" | 48" | 30" | 1/16" | 6 5/8" | 25 gal. | 4 | 14" | 3" | 2 NPS | Male | 160° | UN31HA1/Y | Butterfly Valve, Cage | 00000000 | 0000000 |
| 275 | 40" | 48" | 46" | 1/16" | 6" | 25 gal., 100 L | 4 | 9" | 2 1/2" | 2 NPS | Male | 160° | UN31HA1/Y | Butterfly Valve, Cage, Threaded 2 NPS Fill Cap Plug | 0000000 | 000000 |
| Red Replacement Fill Cap with TPE Rubber Seal | 0000000 | Each | 000000 |
Max. Fork | Drain | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., gal. | Wd. | Dp. | Ht. | Thick. | Fill Opening Dia. | Graduation Marks | No. of Entry Points for Forklifts | Wd. | Ht. | Coupling Size | Gender | Max. Temp., °F | Shipping Standard | Features | Each | |
White HDPE Plastic with Galvanized Steel Pallet | ||||||||||||||||
| 135 | 40" | 48" | 27" | 1/16" | 6" | __ | 4 | 14 1/2" | 3 1/2" | __ | Male | 140° | UN31HA1/Y1.9/100 | Cage, Threaded 2 NPT Fill Cap Plug | 00000000 | 0000000 |
| 330 | 40" | 48" | 53" | 1/16" | 6" | 25 gal., 100 L | 4 | 12" | 3 1/2" | 2 | Male | 160° | UN31HA1/Y | Ball Valve, Cage, Threaded 2 NPS Fill Cap Plug | 0000000 | 000000 |
| Red Replacement Fill Cap with TPE Rubber Seal | 0000000 | Each | 000000 |
UV-Resistant UN-Compliant Tanks
Protect shipments of hazardous material during transit. A UV-resistant coating shields these tanks from sun damage, preventing leaks through weakened walls. They’re also protected by a rigid steel cage. These tanks comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air.
These tanks are also known as intermediate bulk containers (IBCs). They store five times as much material as a 55 gal. drum. Unlike round drums, these tanks can be tightly packed side-by-side to maximize your floor space. For added capacity, stack them two high when full or four high when empty.
Note: It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials and ensure the appropriate method for shipping.
For technical drawings and 3-D models, click on a part number.
Max. Fork | Drain | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., gal. | Wd. | Dp. | Ht. | Thick. | Fill Opening Dia. | Graduation Marks | No. of Entry Points for Forklifts | Wd. | Ht. | Pipe Size | Gender | Max. Temp., °F | Shipping Standard | Features | Each | |
White HDPE Plastic with Galvanized Steel Pallet | ||||||||||||||||
| 275 | 40" | 48" | 46" | 1/16" | 6" | 25 gal., 100 L | 4 | 9" | 2 1/2" | 2 NPS | Male | 160° | UN31HA1/Y | Butterfly Valve, Cage, Threaded 2 NPS Fill Cap Plug | 0000000 | 0000000 |
| For Fill Opening Dia. | Material | Color | Seal Material | Features | Each | |
| 6" | Polyethylene Plastic | Red | TPE Rubber | Threaded 2 NPS Fill Cap Plug | 0000000 | 000000 |
Fiberglass Pans
Bottom Inside | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Lg. | Wd. | Ht. | Lg. | Wd. | Autoclavable | Max. Temp., °F | Space Saving Features | Choose a Color | Each | ||
| B | 1 1/2 gal. | 11 3/4" | 8 3/4" | 4 1/8" | 11" | 8" | Yes | 250° | Nestable | 0000000 | 000000 | |
| B | 10 1/4 gal. | 22" | 16 1/2" | 8 1/2" | 19 1/4" | 14 5/8" | Yes | 250° | Nestable | 0000000 | 00000 | |
| C | 3 gal. | 16 1/2" | 11 3/8" | 4 5/8" | 14 5/8" | 10 1/2" | Yes | 250° | Stackable | 0000000 | 00000 | |
| C | 3 1/4 gal. | 17 3/4" | 10 1/2" | 4 1/8" | 15 5/8" | 9 1/2" | Yes | 250° | Stackable | 00000000 | 00000 | |
| C | 4 1/4 gal. | 20 5/8" | 11 1/4" | 5 1/2" | 18" | 10" | Yes | 250° | Stackable | 0000000 | 00000 | |
| C | 15 gal. | 33 1/8" | 15 5/8" | 8" | 30 3/4" | 14 1/4" | Yes | 250° | Stackable | 0000000 | 00000 | |
Food Industry Fiberglass Pans
Often used in cafeterias and food-processing areas, these pans meet NSF/ANSI 2 standards for food equipment.
Bottom Inside | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Lg. | Wd. | Ht. | Lg. | Wd. | Autoclavable | Max. Temp., °F | Space Saving Features | Specifications Met | Choose a Color | Each | |
| 1 1/4 gal. | 18 3/4" | 11 7/8" | 1 3/4" | 17" | 11" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 000000 | |
| 1 1/4 gal. | 22" | 12" | 1 1/4" | 21 1/8" | 11 1/8" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
| 3 gal. | 23 3/8" | 12" | 3 1/8" | 21 1/8" | 11 1/8" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
| 5 gal. | 30 3/8" | 15 7/8" | 2 3/4" | 29 5/8" | 15 1/8" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
| 5 3/4 gal. | 23 3/8" | 12" | 6" | 21" | 11" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
| 9 1/4 gal. | 31 3/4" | 19 1/8" | 4 1/2" | 29 3/4" | 18" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
| 10 1/4 gal. | 25 3/4" | 15 3/4" | 7 1/4" | 23 1/2" | 14" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
Vented Fiberglass Pans
Bottom Inside | Side Slot | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, gal. | Lg. | Wd. | Ht. | Lg. | Wd. | Bottom Hole Dia. | Lg. | Wd. | Color | Autoclavable | Max. Temp., °F | Space Saving Features | Features | Each | |
| 3 | 16 1/2" | 11 3/8" | 4 5/8" | 14 5/8" | 10 1/2" | 1/4" | 2 1/2" | 5/16" | Gray | Yes | 350° | Stackable | Handholds | 0000000 | 000000 |
| 4 1/4 | 23 3/8" | 12" | 4 3/8" | 21" | 11" | 1/4" | 2 1/2" | 5/16" | Gray | Yes | 350° | Stackable | Handholds | 0000000 | 00000 |
Fiberglass Tote Boxes
These tote boxes resist most chemicals, solvents, and oils.
Boxes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bottom Inside | Tight-Fitting Lids | |||||||||||
| Lg. | Wd. | Ht. | Lg. | Wd. | Cap., lbs. | Space Saving Features | Features | Choose a Color | Each | Each | ||
| 18" | 10 3/4" | 5" | 14 1/4" | 9 1/4" | 300 | Nestable, Stackable | Handholds | 000000 | 000000 | 0000000 | 000000 | |
| 19 3/4" | 12 3/4" | 6" | 16 1/4" | 11 1/4" | 300 | Nestable, Stackable | Handholds | 000000 | 00000 | 0000000 | 00000 | |
| 20 3/4" | 13" | 8" | 16" | 11" | 300 | Nestable, Stackable | Handholds | 00000000 | 00000 | 0000000 | 00000 | |
| 24" | 20" | 12 3/4" | 20 1/2" | 14 1/8" | 250 | Nestable, Stackable | Handholds | 0000000 | 00000 | 000000 | 00 | |
| 24 1/4" | 14 3/4" | 8" | 19 3/8" | 12 5/8" | 400 | Nestable, Stackable | Handholds | 00000000 | 00000 | 0000000 | 00000 | |
| 25 1/4" | 18 1/4" | 10 1/4" | 21" | 15 7/8" | 500 | Nestable, Stackable | Handholds | 000000 | 00000 | 0000000 | 00000 | |
| 27 1/2" | 20" | 14 1/4" | 20 7/8" | 17 1/8" | 500 | Nestable, Stackable | Handholds | 0000000 | 00000 | 0000000 | 00000 | |
| 42 1/2" | 20 1/4" | 14 1/4" | 35 1/4" | 17 1/8" | 500 | Nestable, Stackable | Handholds | 0000000 | 000000 | 0000000 | 00000 | |
Fiberglass Vented Tote Boxes
With a capacity of 150 lbs., these are our strongest vented tote boxes. They resist most chemicals, solvents, and oils.
For technical drawings and 3-D models, click on a part number.
Boxes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bottom Inside | Loose-Fitting Lids | ||||||||||||
| Lg. | Wd. | Ht. | Lg. | Wd. | Cap., lbs. | No. of Vented Sides | Bottom Opening Dia. | Space Saving Features | Choose a Color | Each | Each | ||
Vented Bottom | |||||||||||||
| 18" | 10 3/4" | 5" | 14 1/8" | 9 1/2" | 150 | 2 | 3/8" | Nestable, Stackable | 0000000 | 000000 | 0000000 | 000000 | |
| 20 1/2" | 13" | 8" | 16 3/8" | 11" | 150 | 2 | 3/8" | Nestable, Stackable | 0000000 | 00000 | 0000000 | 00000 | |
| 25 1/4" | 18" | 10" | 20" | 16" | 150 | 2 | 1/4" | Nestable, Stackable | 0000000 | 000000 | 0000000 | 00000 | |
Chemical Hose Nozzles with Hose and Cam-and-Groove Fittings
Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down. To resist corroding from citric acid, ethanol, and other chemicals, these nozzles are made of either polypropylene or aluminum and the hose is PVC. These nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. These nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.
Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.
Aluminum nozzles resist wear and tear better than polypropylene nozzles.
Spout | Hose | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Coupling Size | Socket ID | Connection | Max. Pressure | Temp. Range, °F | OD | Lg. | Fitting Material | Shut-Off Type | ID | OD | Bend Radius | Lg., ft. | Material | Includes | Each | |
Polypropylene Plastic Nozzles | |||||||||||||||||
For Use With Carbon Dioxide, Citric Acid, Coolant, Diesel Fuel, Ethanol, Ethyl Alcohol, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Phosphoric Acid, Potassium Hydroxide, Vegetable Oil | |||||||||||||||||
| 8 | 2 | 2 1/2" | Cam-and-Groove Female Socket | 150 psi @ 72° F | 25° to 150° | 1 1/8" | 5" | Polypropylene Plastic | Manual | 1" | 1 5/16" | 4" | 8 | PVC Plastic | Mounting Bracket | 0000000 | 0000000 |
Aluminum Nozzles | |||||||||||||||||
For Use With Carbon Dioxide, Citric Acid, Coolant, Diesel Fuel, Ethanol, Ethyl Alcohol, Isopropyl Alcohol, Mineral Oil, Mineral Spirits | |||||||||||||||||
| 10 | 2 | 2 1/2" | Cam-and-Groove Female Socket | 150 psi @ 72° F | 25° to 150° | 1" | 6" | Polypropylene Plastic | Manual | 1" | 1 5/16" | 4" | 8 | PVC Plastic | Mounting Bracket | 0000000 | 000000 |