Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.

These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.

Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.

These two-part epoxy coatings resist chemicals and other solvents.

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Protect concrete from mild chemicals, salts, soaps, and detergents.

Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.

Even in furnace-like heat, these coatings protect your electronics from moisture, dust, and static. They withstand temperatures up to 270° higher than standard silicone coatings while remaining flexible enough to not crack and peel from vibration.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.

From shore to sea floor, these potting compounds are formulated for permanent submersion in water—even salt water. Use them to protect circuits and splices in pumps and underwater lighting, as well as other underwater electronics from corrosion and chemicals.

Protect circuit boards and other electronics where high heat is a concern but you don’t need to transfer that heat elsewhere. These compounds are a good middle ground between standard epoxy compounds and heat-transfer compounds.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Repel spills and block stains without changing the look of fabric or upholstery.

Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings.

Use this low-VOC paint in enclosed spaces to stop rust from starting and prevent existing rust from spreading.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.