This chain is approximately 50% stronger than Grade 30 chain.

With a maximum temperature of 500° F, this chain withstands higher temperatures than other steel chain.

This is the strongest tangle-resistant chain we offer. Shorter links make it easier to coil and less likely to knot.

For maximum security, square links are more difficult to cut with bolt cutters than round links.

This chain is approximately 25% stronger than Grade 80 chain.

Gauge measures the maximum allowable wear tolerances on links of Grade 80 or Grade 100 steel chain, as required by OSHA. If the gauge can be inserted over any part of the link, the chain should be taken out of service.

Bind, bundle, tow, and haul—this steel chain has fttings on each end for versatility.

Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Hang, pull, and secure loads. These rings are good for general non-lifting applications.

Once secured with the included locking pin, these links must be cut off to be removed.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

The pins have flush ends to prevent snagging and accidental disengagement.

Cotter pins secure each end of these shackles for temporary installations.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Slide the clevis pin into these hooks to attach chain, no extra fittings needed.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the clevis end.

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied.

A ball-bearing swivel allows these hooks to rotate under load. Attach to chain by inserting the included pin through a link.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

Often used in binding and tie-down applications, these securely hold a single link of chain.

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

Adjust the chain length and number of legs without changing slings.

Prevent accidental opening of the hook with these locking hooks.