Grade 30 Chain—Not for Lifting
Use this strong chain for binding loads, tie downs, and towing applications. It is stamped with the grade and manufacturer. When using fittings with chain, you must match the trade size and meet or exceed the chain’s grade.
Zinc-plated steel chain has good corrosion resistance. Galvanized steel chain has excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Inside | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Straight-Link Chain Trade Size | Metric Trade Size | Thick. | Wd. | Lg. | Cap., lbs. | Wt. per ft., lbs. | Approximate No. of Links per ft. | For Fitting Thick. | Max. Temp., ° F | For Use Outdoors | Lengths, ft. | Per Ft. | |
Unfinished Steel | |||||||||||||
| 1/8 | 4 | 0.16" | 0.27" | 0.90" | 400 | 0.3 | 13 | 1/4" | 400º | No | 0000000 | 00000 | |
Zinc-Plated Steel | |||||||||||||
| 1/8 | 4 | 0.16" | 0.27" | 0.90" | 400 | 0.3 | 13 | 1/4" | 400º | No | 0000000 | 0000 | |
Galvanized Steel | |||||||||||||
| 1/8 | 4 | 0.16" | 0.27" | 0.90" | 400 | 0.3 | 13 | 1/4" | 400º | Yes | 0000000 | 0000 | |
Green Powder-Coated Steel | |||||||||||||
| 1/8 | __ | 0.13" | 0.24" | 0.92" | 400 | 0.2 | 13 | 3/16" | 200º | No | 0000000 | 0000 | |
Corrosion-Resistant Chain—Not for Lifting
This chain withstands conditions that can deteriorate steel chain.
304 and 316 stainless steel chain are the most corrosion resistant. 316 stainless steel is more corrosion resistant than 304 stainless steel, so you can use it in food processing areas and environments where chemicals are used.
Inside | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Straight-Link Chain Trade Size | Metric Trade Size | Thick. | Wd. | Lg. | Cap., lbs. | Approximate No. of Links per ft. | For Fitting Thick. | Max. Temp., ° F | For Use Outdoors | Lengths, ft. | Per Ft. | |
304 Stainless Steel  | ||||||||||||
| 1/8 | 4 | 0.16" | 0.26" | 0.94" | 400 | 13 | 1/4" | 750° | Yes | 0000000 | 00000 | |
316 Stainless Steel | ||||||||||||
| 1/8 | 4 | 0.16" | 0.26" | 0.94" | 400 | 13 | 1/4" | 750° | Yes | 0000000 | 0000 | |
Light Duty Hammer-Close Connecting Links—Not for Lifting
Also known as lap links or repair links. These links are an economical option to join chain links and attach fittings. Use a ball peen hammer to hammer them closed. They must be completely closed to perform at capacity. Never reuse links after they've been closed.
Zinc-plated steel connectors are mildly corrosion resistant.
For technical drawings and 3-D models, click on a part number.
| For Straight-Link Chain Trade Size | Thick. | Inside Lg. | Inside Wd. | Capacity, lbs. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||
|---|---|---|---|---|---|---|---|
| 1/8 | 1/8" | 3/4" | 1/4" | 100 | 10 | 000000 | 00000 |
Pear-Shaped Links—For Lifting
Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end. These links meet strict ASME safety standards for lifting.
316 stainless steel links have excellent resistance to salt water and chemicals.
Note: Capacities listed are for vertical lifting only. As the angle changes from vertical, the amount of weight the link can lift is significantly reduced.
For technical drawings and 3-D models, click on a part number.
For Straight-Link Chain Trade Size | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| One Chain | Thick. | Inside Lg. | Narrow-End Inside Wd. | Wide-End Inside Wd. | Capacity, lbs. | Fabrication | Specifications Met | Each | |
For Grade 50 Chain | |||||||||
316 Stainless Steel | |||||||||
| 1/8 | 3/8" | 4" | 1" | 2" | 700 | Welded | ASME B30.26 | 0000000 | 0000000 |
Rings—For Lifting
Use these links for general lifting applications. All meet strict ASME safety standards for lifting.
316 stainless steel rings are approximately 60% as strong as alloy steel rings. They have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
| For Straight-Link Chain Trade Size | Thick. | Inside Lg. | Capacity, lbs. | Fabrication | Specifications Met | Each | |
For Grade 80 Chain | |||||||
|---|---|---|---|---|---|---|---|
316 Stainless Steel | |||||||
| 1/8 | 3/8" | 2" | 700 | Welded | ASME B30.26, OSHA Compliant 29 CFR 1910.184 | 00000000 | 000000 |