ANSI 06B Roller Chain | McMaster-Carr

Filter by

Roller Chain Trade Number

System of Measurement

Pitch

Component

Material

Length

Strand Type

Roller Chain Standard

Roller Width

Roller Diameter

Number of Teeth

Chain Style

For Roller Chain Strand Type

Link Type

Shaft Diameter

Roller Chain Pitch Type

Specifications Met

Hub Diameter

Overall Depth

REACH Compliance

DFARS Compliance

RoHS Compliance

Forward

How can we improve?

54 Products

About Roller Chain and Sprockets

Metric Roller Chain and Links

This chain conforms to ISO 606B and is compatible with BS 228 (British standard) and DIN 8187 (German standard).

Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. They can join chain that requires an odd number of links. For trade number 06B and up, the side plate is easy to remove for attaching them to chain.

For technical drawings and 3-D models, click on a part number.

Single Strand

Chain

Connecting Link

Adding-and-Connecting Link

Chain

	Pitch
Roller Chain Trade No.	mm	in.	Roller Dia., mm	Roller Wd., mm	Working Load, lbs.	Lengths, ft.		Per Ft.
Steel
06B	9.53	0.375"	6.35	5.72	380	1-20, 50, 100	0000000	00000

Connecting Links

	Pitch
Roller Chain Trade No.	mm	in.	Roller Dia., mm	Roller Wd., mm	Working Load, lbs.		Each
Steel
06B	9.53	0.375"	6.35	5.72	380	0000000	00000

Adding-and-Connecting Links

	Pitch
Roller Chain Trade No.	mm	in.	Roller Dia., mm	Roller Wd., mm	Working Load, lbs.		Each
Steel
06B	9.53	0.375"	6.35	5.72	380	0000000	00000

Corrosion-Resistant Metric Roller Chain and Links

Chain

Connecting Link

Adding-and-Connecting Link

Made of stainless steel, this chain has excellent corrosion resistance. It conforms to ISO 606B and is compatible with BS 228 (British standard) and DIN 8187 (German standard).

For technical drawings and 3-D models, click on a part number.

	Pitch					Chain			Connecting Links		Adding-and-Connecting Links
Roller Chain Trade No.	mm	in.	Roller Dia., mm	Roller Wd., mm	Working Load, lbs.	Length, ft.		Per Ft.		Each		Each
Single Strand
18-8 Stainless Steel
06B-SS	9.53	0.375"	6.35	5.72	60	1-10, 20, 50, 100	00000000	000000	00000000	00000	00000000	000000

High-Accuracy Roller Chain Wear-Indicating Gauges

Precisely measure chain elongation to see if you need to replace your chain. These gauges give a more accurate reading than alternatives because they’re designed to anchor to a roller and extend across several links. A color indicator helps you quickly measure the space between rollers. If the gauge rests on top of the chain and you see green markings, your chain doesn't need to be replaced. If it slips between two rollers and you only see red markings, it’s time for a replacement.

Gauges

For Single-, Double-, and Triple-Strand ISO Roller Chain
For Roller Chain Trade Size	Material		Each
06B	Steel	0000000	0000000

Gauges with Plastic Case

For Single-, Double-, and Triple-Strand ISO Roller Chain
No. of Gauges	For Roller Chain Trade Size	Material	Includes		Each
5	06B, 08B, 10B, 12B, 16B	Steel	Chain Indentification Tool	0000000	0000000

Sprockets for Metric Roller Chain

Designed to meet ISO 606 and DIN 8187 international dimensional standards, these sprockets are for use with compatible ISO and DIN roller chain. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.

For technical drawings and 3-D models, click on a part number.

For ISO 06B Roller Chain (9.53 mm Pitch)
Number of Teeth	For Shaft Dia., mm	For Max. Shaft Dia., mm	OD, mm	Overall Wd., mm	Hub Dia., mm	Material	Specifications Met		Each
8	8	9	28	22	13	Steel	DIN 8187, ISO 606	0000000	000000
9	8	11	31	22	16	Steel	DIN 8187, ISO 606	0000000	00000
10	8	12	34	22	20	Steel	DIN 8187, ISO 606	0000000	00000
11	8	14	37	25	23	Steel	DIN 8187, ISO 606	0000000	00000
12	8	16	41.91	25	26	Steel	DIN 8187, ISO 606	000000	00000
13	10	18	43	25	29	Steel	DIN 8187, ISO 606	0000000	00000
14	10	16	48.01	25	31	Steel	DIN 8187, ISO 606	000000	00000
15	10	20	51.05	25	34	Steel	DIN 8187, ISO 606	000000	00000
16	10	22	53.85	25	37	Steel	DIN 8187, ISO 606	000000	00000
17	10	25	56.9	28	40	Steel	DIN 8187, ISO 606	000000	00000
18	10	25	59.94	28	43	Steel	DIN 8187, ISO 606	000000	00000
19	10	28	62.99	28	46	Steel	DIN 8187, ISO 606	000000	00000
20	10	30	66.04	28	49	Steel	DIN 8187, ISO 606	000000	00000
21	12	30	69.09	28	50	Steel	DIN 8187, ISO 606	0000000	00000
22	12	32	72.14	28	51	Steel	DIN 8187, ISO 606	0000000	00000
23	12	32	73.5	28	52	Steel	DIN 8187, ISO 606	0000000	00000
24	12	32	77	28	54	Steel	DIN 8187, ISO 606	0000000	00000
25	12	35	81.03	28	57	Steel	DIN 8187, ISO 606	0000000	00000
26	12	38	83	28	60	Steel	DIN 8187, ISO 606	0000000	00000
27	12	38	86	28	60	Steel	DIN 8187, ISO 606	00000000	00000
28	12	38	89	28	60	Steel	DIN 8187, ISO 606	00000000	00000
29	12	38	92	28	60	Steel	DIN 8187, ISO 606	00000000	00000
30	12	38	96.27	30	60	Steel	DIN 8187, ISO 606	0000000	00000
32	14	40	102.73	30	65	Steel	DIN 8187, ISO 606	00000000	00000
40	16	45	126.96	30	70	Steel	DIN 8187, ISO 606	00000000	00000
45	16	45	142.1	30	75	Steel	DIN 8187, ISO 606	00000000	00000

Machinable-Bore Corrosion-Resistant Sprockets for Metric Roller Chain

Machine the center of these sprockets to fit the exact dimensions of your shaft. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size. The teeth are sized to fit into metric ISO roller chain. Made from stainless steel, they won’t corrode from humidity or frequent washdowns. The extended hub makes these sprockets more stable and more durable than sprockets with flat hubs. They meet ISO 606 (formerly DIN 8187), which is an international standard for dimensions and materials.

For technical drawings and 3-D models, click on a part number.

For ISO 06B Roller Chain (9.53 mm Pitch)
Number of Teeth	For Shaft Dia., mm	For Max. Shaft Dia., mm	OD, mm	Overall Wd., mm	Hub Dia., mm	Material	Specifications Met		Each
14	10	19	48.36	25	31	Stainless Steel	DIN 8187, ISO 606	0000000	0000000
17	10	25	57.39	25	40	Stainless Steel	DIN 8187, ISO 606	0000000	000000

Flat Sprockets for Metric Roller Chain

With metric teeth and slim profile, these sprockets allow your ISO roller chain to reach narrow spaces. They're commonly referred to as A-plate sprockets. Machine the unfinished bore to fit your shaft—sprockets come machined to the shaft diameter listed and are machinable up to the maximum shaft diameter size. Sprockets meet DIN 8187 and ISO 606, international standards for sprockets and roller chains.

For technical drawings and 3-D models, click on a part number.

For ISO 06B Roller Chain (9.525 mm Pitch)
Number of Teeth	For Shaft Dia., mm	For Max. Shaft Dia., mm	OD, mm	Overall Wd., mm	Material	Specifications Met		Each
15	8	35	51.05	6	Steel	DIN 8187, ISO 606	00000000	000000
16	10	39	53.85	6	Steel	DIN 8187, ISO 606	00000000	00000
17	10	42	56.9	6	Steel	DIN 8187, ISO 606	00000000	00000
18	10	45	59.94	6	Steel	DIN 8187, ISO 606	00000000	00000
20	10	51	66.04	6	Steel	DIN 8187, ISO 606	00000000	00000
21	10	54	69.09	6	Steel	DIN 8187, ISO 606	00000000	00000
22	10	57	72.14	6	Steel	DIN 8187, ISO 606	00000000	00000
26	10	69	84.07	6	Steel	DIN 8187, ISO 606	00000000	00000
28	10	75	90.17	6	Steel	DIN 8187, ISO 606	00000000	00000
36	12	100	114.3	6	Steel	DIN 8187, ISO 606	00000000	00000
40	14	112	126.49	6	Steel	DIN 8187, ISO 606	00000000	00000
60	18	172	187.2	6	Steel	DIN 8187, ISO 606	00000000	00000

Idler Sprockets for Metric Roller Chain

Keep constant tension on your drive with these sprockets that press against your metric ISO roller chain to take up slack and reduce wear and vibration. They rotate freely on built-in ball bearings, which are double sealed to keep dirt out, and are for use with roller chain tensioners. All come with a finished bore that fits directly onto your shaft—no need for machining. These sprockets meet ISO 606, which is an international standard for dimensions and materials.

For technical drawings and 3-D models, click on a part number.

						Bearing
Number of Teeth	For Shaft Dia., mm	OD, mm	Overall Wd., mm	Hub Dia., mm	Material	Type	Material	Specifications Met		Each
For ISO 06B Roller Chain (9.53 mm Pitch)
21	16	68	18	40	Steel	Ball	Steel	ISO 606	0000000	000000

Taper-Lock Bushing-Bore Sprockets for Metric Roller Chain

While their teeth fit into metric ISO roller chain, these sprockets use taper-lock bushings to grip shafts. That means you can switch to a different diameter shaft by changing the bushing instead of machining the sprocket. Bushings mount flush inside these sprockets; secure them in place by tightening the set screws included with the bushings. These sprockets have an extended hub that makes them more stable and durable than flat sprockets. All meet ISO 606 (formerly DIN 8187), which is an international standard for sprocket and roller chain dimensions and materials.

For technical drawings and 3-D models, click on a part number.

For Single-Strand Roller Chain

For ISO 06B Roller Chain (9.53 mm Pitch)
Number of Teeth	For Bushing Style	OD, mm	Overall Wd., mm	Hub Dia., mm	Teeth Heat Treatment	Material	Specifications Met		Each
18	1008	59.94	22	47.63	Hardened	Steel	DIN 8187, ISO 606	00000000	000000
22	1210	72.14	25	60.33	Hardened	Steel	DIN 8187, ISO 606	00000000	00000
26	1610	84.07	25	73.03	Hardened	Steel	DIN 8187, ISO 606	00000000	00000
28	1610	90.17	25	73.03	Hardened	Steel	DIN 8187, ISO 606	00000000	00000

Channel-Guided Roller Chain Tensioners

Built-in springs put constant tension on roller chain to absorb and buffer shock, reduce vibration, and improve drive performance.

For technical drawings and 3-D models, click on a part number.

			Overall					Mounting Holes
For Roller Chain Trade Size	Tension Force, lbs.	Travel Ht.	Ht.	Wd.	Dp.	Material	Housing Material	Dia.	No. of	Mounting Fasteners Included	Max. Temperature, ° F		Each
For Single-Strand ISO Roller Chain
Vertical/Horizontal Mount
06B	5-30	1.05"	5 19/32"	2 5/16"	1"	Plastic	Aluminum	3/8"	1	No	180°	0000000	0000000