Once secured with the included locking pin, these links must be cut off to be removed.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

The twisted shape of these links prevents loads from rotating or knotting.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Restrict rope and chain movement with the narrow end, attach multiple connectors to the wide end, and then hammer these links closed.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

These have a removable half-link to attach large rings, links, and other closed fittings.

Weld these hooks into place to create a permanent lifting device.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

Garolite insulation prevents electrical current from passing to hoists and other lifting equipment, causing damage. Because they're electrical insulating, these hooks are often used to hold a workpiece while welding.

Rotate these hooks for easy positioning before lifting your load. They have a latch that locks when a load is applied for a more secure connection than standard hooks.

For a more secure connection than standard hooks, these hooks have a latch that locks closed when a load is lifted. A ball-bearing swivel allows them to rotate under a load.

A ball-bearing swivel allows these hooks to rotate under load. Attach to chain by inserting the included pin through a link.

These rotate for easy positioning before a load is applied.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

Often used in binding and tie-down applications, these securely hold a single link of chain.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the eye end.

Attach chain to the eye end of these hooks.

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

Meeting strict standards for lifting, yet flexible and lightweight, these shackles wrap around a variety of lifting points.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Secure each end with the cotter pins for temporary installations.

To prevent these shackles from snagging or accidentally coming undone, their pin doesn’t stick out from their body.

More secure than screw-pin shackles, these shackles close with a bolt that’s fastened with a nut and a cotter pin.

The pin doesn’t stick out from their body, so these shackles won’t snag or accidentally come undone. They have a narrow opening that restricts the movement of wire rope and chain.

A lip on the shackle keeps the pin from falling out when loosened.

For use in low-vibration applications where the shackle remains stationary.

A lip on the shackle keeps the pin from falling out when loosened.

Minimize twisting and knotting of rope and chain.

Since their pin doesn’t stick out from their body, these shackles won’t snag or accidentally come undone. They have a twisted shape to prevent rope and chain from twisting and knotting.

Pull the collar to release the shackle from its locked position.

Attach a rope to the ring on the pin for remote release where access is limited. These shackes have a clevis end for making pivoting connections.

Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.

Slide the lock down to open the latch and release it to lock these carabiners.

Create fast connections with items, such as rope, chain, and straps.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

Lock the bolt with wire or a cable tie for a secure connection.

One side is closed and the other is open.

The spring-loaded latches on these hooks snap back into place, securing your load.

These hooks have closed ends on both sides.

Use these S-hooks for lifting applications.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

These links allow you to mount chain with a screw, bolt, or rivet.

Thread chain through the hole of these links to form an adjustable loop or connect chain ends to form a longer chain.

The fitting lets you connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.

Connect two lengths of chain to make longer chain barriers.