A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

The pins have flush ends to prevent snagging and accidental disengagement.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Meeting strict standards for lifting, yet flexible and lightweight, these shackles wrap around a variety of lifting points.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

More secure than screw-pin shackles, these shackles close with a bolt that’s fastened with a nut and a cotter pin.

To prevent these shackles from snagging or accidentally coming undone, their pin doesn’t stick out from their body.

For use in low-vibration applications where the shackle remains stationary.

The bolt on these shackles is fastened with a nut and cotter pin, making them more secure than shackles with a screw pin. Also known as D-shackles, they have a narrow opening that restricts the movement of wire rope and chain.

Since they close with a screw pin, these shackles are quick to install and remove by hand, but should only be used in low-vibration environments where they’ll remain stationary. Their narrow opening restricts the movement of wire rope and chain.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch. These shackles have a pin that screws in, so they’re quick to open and close by hand.

Indentations in the shackle body hold the head of the pin in place once fastened.

The twisted shape of these shackles keeps rope and chain from twisting and knotting. And if their screw becomes loose, the lip on the shackles prevents it from falling out.

Since their pin doesn’t stick out from their body, these shackles won’t snag or accidentally come undone. They have a twisted shape to prevent rope and chain from twisting and knotting.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Attach a rope to the ring on the pin for remote release where access is limited. These shackes have a clevis end for making pivoting connections.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

These snaps have an eye that rotates for easy positioning.

Lock the bolt with wire or a cable tie for a secure connection.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

Squeeze the trigger to quickly release the latch.

Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.

The most secure carabiner we offer, these carabiners won’t accidentally open when rope slides because you need to unscrew the latch to unlock them.

The opening on these hooks fits large anchor points and allows chain to slide through when the hook is closed. They have a spring latch to ensure rope, chain, and fittings won't detach from the hook when the load slackens.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

Screw these hooks into place with their threaded shank.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the clevis end.

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

For a more secure connection than standard hooks, these hooks have a latch that locks closed when a load is lifted. A ball-bearing swivel allows them to rotate under a load.

Rotate these hooks for easy positioning before lifting your load. They have a latch that locks when a load is applied for a more secure connection than standard hooks.

A ball-bearing swivel allows these hooks to rotate under load. Attach to chain by inserting the included pin through a link.

These rotate for easy positioning before a load is applied.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

Often used in binding and tie-down applications, these securely hold a single link of chain.

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

An unthreaded shank allows you to cut your own threads.

Prevent accidental release and keep the tip from snagging.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

The snap and split ring swing freely and pull from the center for easy alignment.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

These hooks have closed ends on both sides.

These hooks meet MS-87006.

The spring-loaded latches on these hooks snap back into place, securing your load.

Use these S-hooks for lifting applications.