About Structural Adhesives
More
Contact Adhesives
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Black adhesive works especially well on foam insulation.
Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
3M Adhesives | |||||||||||||
1357 | 1 gal. | Can | 10 min. | 24 hrs. | 158 | Thin Liquid | 325 | -30° to 220° | Light Yellow | Ceramic, Glass, Masonry, Metal, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NH; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 0000000 |
2262 | 32 fl. oz. | Can | 10 min. | 24 hrs. | Not Rated | Thin Liquid | 525 | -10° to 230° | Clear | Metal, Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 00000000 | 000000 |
Pliobond Adhesives | |||||||||||||
20 | 1 fl. oz. | Tube | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Glass, Metal, Plastic, Rubber | __ | 0000000 | 0000 |
25 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | __ | 0000000 | 00000 |
25 | 16 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | __ | 0000000 | 00000 |
25 | 32 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 00000 |
25 | 1 gal. | Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 000000 |
Adhesives | |||||||||||||
__ | 4 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 8 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 16 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 16 fl. oz. | Brush-Top Can | 3 min. | 36 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 250° | Black | Foam, Masonry, Metal, Plastic, Rubber | __ | 00000000 | 00000 |
__ | 32 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 00000 |
__ | 1 gal. | Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 000000 |
High-Temperature Contact Adhesives
These adhesives resist temperatures up to 500° F, as well as chemicals, fuels, grease, and water. Apply them to both surfaces, air dry, and then bring together to bond. Heat to 300° F to reach full strength. They cannot be sold to the regions listed because these adhesives exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Heating Requirements to Reach Full Strength | Shear Strength, lbs./sq. in. | Cure Type | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
Pliobond Adhesives | |||||||||||||||
HT-30 | 32 oz. | Can | 3 min. | 30 min. | 30 min. @ 300° F | 1,450 | Heat, Room Temperature | Thick Liquid | 6,500 | -40° to 500° | Beige | Ceramic, Metal | CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, Northern VA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT, VT | 000000 | 000000 |
HT-30 | 1 gal. | Can | 3 min. | 30 min. | 30 min. @ 300° F | 1,450 | Heat, Room Temperature | Thick Liquid | 6,500 | -40° to 500° | Beige | Ceramic, Metal | CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, Northern VA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT, VT | 000000 | 000000 |
Ceramic Adhesives
Often used for bonding and repair on exhaust systems, diesel engines, and gas turbines, these adhesives withstand high temperatures and provide excellent electrical insulation. Pastes will not drip or sag while hardening on a vertical surface, while thick liquids flow into small spaces and are easy to spread.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Consistency | Viscosity, cP | Max. Temp., °F | Color | For Joining | Each | |
8 | Pail | 20 min. | 48 hrs. | 0.865 | Thick Liquid | 90,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 000000 |
8 | Pail | 20 min. | 48 hrs. | 0.865 | Paste | 130,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 00000 |
8 | Pail | 20 min. | 48 hrs. | 0.865 | Paste | 190,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 00000 |
64 | Pail | 20 min. | 48 hrs. | 0.865 | Paste | 130,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 000000 |
64 | Pail | 20 min. | 48 hrs. | 0.865 | Paste | 190,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 000000 |
Coolant-Resistant Surface Fillers
Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Temp. Range, °F | Color | For Use On | Each | |
16 | Jug | 7 | 10 | Thick Liquid | Not Rated to 500° | Brown | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic | 0000000 | 000000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.
Devcon Metal Patch & Fill repairs worn, rusted, and corroded surfaces with less preparation.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Pkg. Qty. | Pkg. | |
Loctite® Fixmaster Epoxy | |||||||||||||||
EA 445 | __ | 0.12 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
EA 445 | __ | 1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
EA 9131 | __ | 0.12 oz. | Mixer Cup | 90 | 24 hrs. | Thick Liquid | 1.5:1 | 1 sq. in. @ 1/4" | -65° to 180° | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 00000 |
Each | |||||||||||||||
Devcon Aluminum Liquid | |||||||||||||||
10710 | __ | 1 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
10720 | __ | 3 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
Devcon Aluminum Putty | |||||||||||||||
10610 | __ | 1 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
10620 | __ | 3 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
Devcon FasMetal™ 10 HVAC Repair | |||||||||||||||
19770 | 6.5 fl. oz. | __ | Tube | 60 | 16 hrs. | Paste | 1:1 | 30 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 00000 |
Devcon Metal Patch & Fill | |||||||||||||||
S-50 | 3 fl. oz. | __ | Tube | 20 | 6 hrs. | Paste | __ | 6 sq. in. @ 1/4" | 40° to 400° | Gray | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic, Glass | __ | 00000000 | 0000 |
Fuel-Resistant Surface Fillers
Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, pt. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
1.5 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 000000 |
3 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 00000 |
Heavy Duty Roof Patching Compounds
These patching compounds are the most flexible and watertight we offer. Developed for use on flashing, chimneys, and high-stress areas, they are highly vibration resistant.
Dispense compounds in a cartridge in a standard caulk gun (sold separately).
Compounds that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container Size | Consistency | Begins to Harden, hrs. | Reaches Full Strength | Approximate Coverage @ Thick. | Max. Thick. | Application Temp. Range, °F | Color | For Use Outdoors | For Use On | Cannot Be Sold To | Each | |
Cans | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 gal. | Paste | 2 | 7 days | 8 sq. ft. @ 1/4" | 1/8" | 20° to 100° | Black | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 000000 |
Cartridges | ||||||||||||
10.1 fl. oz. | Gel | 12 | 24 hrs. | 1/2 sq. ft. @ 1/4" | 1/2" | 40° to 120° | Black | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | __ | 0000000 | 00000 |
Roof Patching Compounds
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Apply acrylic compounds to dry surfaces. Apply asphalt compounds to wet or dry surfaces.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Consistency | Begins to Harden | Reaches Full Strength | Approximate Coverage @ Thick. | Max. Thick. | Application Temp. Range, °F | Color | Specifications Met | For Use Outdoors | For Use On | Each | |
Acrylic Compounds | |||||||||||||
1 | Can | Thick Liquid | 4 hrs. | 24 hrs. | 12 sq. ft. @ 1/8" | 1/4" | 50° to 90° | White | __ | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 00000000 | 000000 |
Asphalt Compounds | |||||||||||||
1 | Can | Thick Liquid | 60 min. | 30 days | 12 sq. ft. @ 1/8" | 1/2" | 50° to 120° | Black | ASTM D4586 | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 00000 |
4.7 | Pail | Thick Liquid | 60 min. | 30 days | 56 sq. ft. @ 1/8" | 1/2" | 50° to 120° | Black | ASTM D4586 | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 00000 |
Adhesive-Back Roof Repair Rolls
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls. Backing is rubberized asphalt adhesive. Roll can be cut to size.
Lg., ft. | Wd. | Thick. | Material | Backing Material | Mixing Required | Application Temp. Range, °F | For Use On | Each | |
Aluminum | |||||||||
---|---|---|---|---|---|---|---|---|---|
33 1/2 | 4" | 3/64" | Aluminum | Asphalt | No | 55° to 100° | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 000000 |
33 1/2 | 6" | 3/64" | Aluminum | Asphalt | No | 55° to 100° | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 00000 |
33 1/2 | 36" | 3/64" | Aluminum | Asphalt | No | 55° to 100° | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 000000 |
White | |||||||||
33 1/2 | 4" | 3/64" | Aluminum | Asphalt | No | 55° to 100° | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 00000 |
33 1/2 | 6" | 3/64" | Aluminum | Asphalt | No | 55° to 100° | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 00000 |
33 1/2 | 36" | 3/64" | Aluminum | Asphalt | No | 55° to 100° | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 000000 |
High-Temperature Surface Fillers for Metal
Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.
Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | ||||||||||||||
__ | 4 | Stick | 90 min. | 72 | __ | Putty | __ | 16 sq. in. @ 1/4" | -40° to 450° | Gold | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 |
12 | __ | Can, Bottle | 2 hrs. | 6 | 4 hrs. air dry then 2 hrs. @ 160° F | Putty | 2:1 | 48 sq. in. @ 1/4" | Not Rated to 1400° | Light Gray | Sand | Aluminum | 0000000 | 00000 |
24 | __ | Can | 2 hrs. | 6 | 4 hrs. air dry then 2 hrs. @ 160° F | Putty | 2:1 | 96 sq. in. @ 1/4" | Not Rated to 1400° | Light Gray | Sand | Aluminum | 0000000 | 000000 |
Fine-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Wear Resistant Putty | |||||||||||||||
PC 7222 | 1 | Jar | 30 | 24 | Putty | 2:1 | 50 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Conductive Surface Fillers for Electronics
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components. They come as two parts. The size listed is the combined total of the two parts.
Volume resistivity measures how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Container | Temp. Range, °F | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Volume Resistivity, ohms-cm | Mix Ratio | Min. | Max. | For Use On | Each | |
Surface Fillers | |||||||||||
0.09 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | 100:6 | -75° | 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 000000 |
0.35 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | 100:6 | -75° | 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 000000 |
Thick High-Temperature Gasketing Adhesives
Seal fiberglass gaskets into stove doors as well as seals cracks in metal.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Max. Temp., °F | Color | For Use On | Each | |
2.3 | Tube | 60 | 3 | 1 hr. air dry then 2 hrs. @ 500° F | 2000° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry | 0000000 | 000000 |
Thick High-Temperature Gasketing Adhesives in Cartridges
The adhesive seals fiberglass gaskets into stove doors as well as seals cracks in metal. Use the cartridge with a standard caulk gun for quick and easy dispensing.
Container Size, fl. oz. | Begins to Harden, min. | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Max. Temp., °F | Color | For Use On | Each | |
10.3 | 60 | 3 | 1 hr. air dry then 2 hrs. @ 500° F | 2000° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry | 0000000 | 000000 |