We will reply to your message within an hour.
More
Indicate voltage and identify power lines, conduit, fuse boxes, switches, and other electrical equipment.
Notify workers of electrical hazards such as high-voltage equipment and requirements for personal protection.
The headers and illustrations on these labels help workers identify electrical hazards at a glance.
Add electrical hazard symbols to an existing label or use alone to communicate hazards at a glance.
Provide appropriate code numbers for hazards with these NFPA (National Fire Protection Association) labels.
A reference chart explains the NFPA (National Fire Protection Association) color and number designations for hazards. Provide the appropriate code number using the NFPA diamond.
The color stripes and reference chart identify the type of hazard. Write in the appropriate code numbers and list required personal protective equipment.
Prevent health hazards resulting from exposure to chemicals using the UN classification.
Mark hazardous materials and write in information to ensure they are stored and handled properly.
Keep workers informed about chemical and gas usage, warnings, and antidotes in case of exposure.
The illustrations on these labels help workers identify flammable hazards and corrosive materials at a glance.
Alert workers to the presence of flammable materials.
The graphics on these labels identify hazardous materials and provide safety reminders.
Identify hazards at a glance with the headers and illustrations on these labels.
Add hazard symbols to an existing label or use alone to communicate hazards at a glance.
Communicate dangers to workers near equipment that could cause injury.
Identify hazards and unsafe practices that can injure workers around conveying equipment. These labels meet or exceed Conveyor Equipment Manufacturers Association standards and have headers that meet OSHA/ANSI standards for indicating hazards.
Prevent injuries from unexpected machine startups during maintenance and repair—these labels remind you to lock out equipment.
Add a photo in the designated square to identify the employee working a job.
Wrap these labels around padlocks to comply with lockout/tagout procedures.
Add lockout symbols to an existing label or use alone to provide lockout reminders at a glance.
The headers and illustrations on these labels help workers identify lockout reminders at a glance.
Specify the printed message you’d like to appear under the header of these labels.
The illustrations on these labels help workers identify tripping hazards at a glance.
Help prevent accidents in areas with slippery floors, tripping hazards, or low headroom.
Identify dangerous areas to restrict access to authorized personnel.
The illustrations on these labels help workers identify restricted areas at a glance.
The graphics on these labels identify areas that require personal protective equipment, such as safety goggles and boots.
The illustrations on these labels help workers identify safety reminders at a glance.
Designate areas that require personal protective equipment such as safety glasses and ear plugs.
Identify confined spaces that require authorized entry.
The illustrations on these labels help workers identify confined spaces at a glance.
Attach these labels to hard hats to provide safety reminders or to identify first-aid personnel.
Add numbers, abbreviations, and symbols to indicate specific hazards and the degree of hazard using these NFPA (National Fire Protection Association) signs.
A reference chart explains the NFPA (National Fire Protection Association) colors and number designations for hazards. Provide the appropriate code number using the NFPA diamond.
Designate the area where machine oils, fuels, and gas cylinders are stored.
Alert workers to the presence of chemicals, combustible liquids and gases, and other hazardous materials.
The illustrations on these signs help workers identify hazards at a glance.
Similar to a Safety Data Sheet (SDS), these signs keep workers informed about chemical and gas usage, warnings, and treatment in the event of exposure.
Give employees access to Safety Data Sheets (SDS) and training booklets according to OSHA's Hazard Communication Standards.
Specify the exact chemical and source of exposure to be printed on these signs.
Alert others to the presence of chemicals such as carbon monoxide, tobacco smoke, and wood dust.
Communicate dangers to workers near moving equipment that could cause injury.
Notify workers of electrical hazards such as arc flashes, buried cable, and high-voltage equipment.
The illustrations on these signs help you identify electrical hazards at a glance.
These large decals have a pebbled nonskid surface and an adhesive backing that sticks to most surfaces.
The illustrations on these signs help workers identify tripping hazards at a glance.
Collapse these signs when not in use. They have the same message printed on all three sides to help prevent accidents around slippery floors.
Attach these signs to the top of any traffic cone.
Stack these signs when not in use. They have the same message printed on all four sides to help prevent accidents around slippery floors.
Fold these signs flat when not in use. They have the same message on all sides to help prevent accidents around slippery floors and tripping hazards.
These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.
Warn against forklift traffic, mark pedestrian crossings, and provide safety reminders to drivers.
The illustrations on these signs help workers identify areas with moving vehicle hazards at a glance.
These signs can be read when viewed in a rearview mirror.
Cover a steering wheel to communicate when equipment is out of service.
Designate areas that require personal protective equipment such as safety glasses and earmuffs.
The illustrations on these signs help workers identify safety reminders at a glance. Use them to designate areas that require personal protective equipment, such as safety glasses, earmuffs, and face masks.
Use the included symbols to inform workers of all the personal protection equipment required.
Clearly identify areas that require personal protective equipment, such as face masks, gloves, hard hats, safety glasses, and hearing protection.
Clearly define dangerous areas such as construction zones and welding areas to restrict access to only authorized personnel.
The illustrations on these signs help workers identify restricted areas at a glance.
These signs have the same message on each side. Place them where needed to clearly define and restrict access to dangerous areas, then fold them when not in use.
These signs have the same message on all three sides. Place them where needed to clearly define and restrict access to areas of a facility, then collapse them when not in use.
Specify the printed message you'd like to appear under the header.
Remind your team to lock out machines during maintenance work to avoid accidental startups.
Mark your lockout station with a sign that employees will see from anywhere in the room.
To limit the spread of illness by helping people social distance, these decals have brightly-colored symbols and text that make them easy to see and understand.
For spaces where you can’t mount to a wall, these signs stand on tables or floors to remind people to social distance or wear a mask, preventing the spread of illness. Fold flat to store.
Promote and remind people to maintain social distancing to protect themselves and others from the spread of illness.
Identify confined spaces that require authorized permit-only entry.
The illustrations on these signs help workers identify confined areas at a glance.
Write a message in the blank space below the header using a permanent marker or adhesive-back characters.
Keep workers informed about globally harmonized system (GHS) symbols and when to use them.
Communicate hand signals for directing crane operation.
Identify the presence of hazardous materials with D.O.T.-regulated numbers, symbols, and messages.
Guide pedestrian and vehicle traffic.
Project messages and warnings in areas with high traffic or that require frequent cleaning.
Tags are laminated in plastic so they hold up outdoors.
Provide appropriate code numbers for hazards with these NFPA (National Fire Protection Association) tags.
The color stripes on these tags identify the type of hazard. Write in the appropriate code numbers to indicate the severity.
Write a message and then seal the laminating flap to protect the text from smudging and wear.
Keep detailed records for lockout/tagout procedures and list employees authorized to perform maintenance for a machine or group of machines.
Sign and date these tags and then seal the laminating flap to protect the text from smudging and wear.
Add a photo in the self-laminating square to identify the employee working a job.
Designed for use in the food industry, these tags remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work while reducing the risk of contaminating the food.
Remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work.
Use these tags to describe equipment and lockout/tagout procedures.
Guide workers through a safety checklist before welding, grinding, cutting, or other work involving fire or sparks.
Stick safety messages and reminders right where they're needed.
Store all of your lockout safety procedure forms in one place. These stations hold binders that you fill with one form for each piece of equipment that lists required lockouts.
This barrier tape has a long-lasting woven construction.