Mount these flat switches to a base or rail. Also known as capacitive proximity switches, they remotely sense both metallic and nonmetallic objects but their strength is in sensing materials such as plastic, ceramic, and clear targets. Often used with programmable logic controllers (PLCs), they produce PNP or NPN signal output. To determine the signal output of a switch you are replacing, use Testers for Proximity and Photoelectric Switches (not included). All are projecting switches, and must be mounted with the area around the sensor face free of metal. They’re rated IP68 for protection from washdowns and temporary submersion.

Also available: If you don’t see the switch you need, please select 6693T999 and specify manufacturer and manufacturer part number.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 6P, 12, IP68 and IP69K, these switches protect against corrosion and high-pressure, high-temperature washdowns. Also known as capacitive proximity switches, they remotely sense both metallic and nonmetallic objects but their strength is in sensing materials such as plastic, ceramic, and clear targets. They’re often used with programmable logic controllers (PLCs) and produce PNP or NPN signal output. To determine the signal output of a switch you are replacing, use Testers for Proximity and Photoelectric Switches (not included). They mount flush with the surface of any material, including metal, and are also known as embeddable or shielded switches. The 4-pole Micro M12 plug connects to cables with sockets (sold separately), allowing you to quickly connect and disconnect the switch.

Also available: If you don’t see the switch you need, please select 6693T999 and specify manufacturer and manufacturer part number.

For technical drawings and 3-D models, click on a part number.

Sense objects in hazardous locations with these intrinsically safe switches. Unlike standard proximity switches, they use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or produce sparks when used. Switches meet ATEX international certification to protect against explosion in environments containing flammable gases and combustible dust. These switches must be connected to the required barriers (sold separately), which reduce the current and voltage flowing into the hazardous location from your power source. While the switches can safely be used in hazardous areas, the barriers must be installed in a separate nonhazardous area.

Also known as capacitive proximity switches, they sense both metallic and nonmetallic objects, but their strength is in detecting plastics, liquids, powder, granular materials, and clear targets. The larger the size of the sensor, the greater your sensing distance is. They're often used with HVAC systems and programmable logic controllers (PLCs). Switches meet various domestic and international safety standards.

To view switch wiring diagrams, select a part number and click Product Detail.

Mount flush switches so that the sensor face is level with the surface of your material. Also known as embeddable or shielded switches, they’re more accurate than projecting switches at close range and can be mounted close together on any surface without causing interference. Projecting switches, also known as non-embeddable or unshielded switches, must be mounted with the area around the sensor face free of metal.

All switches are protected from dust and washdowns. IP67 switches protect against brief submersion. IP68 switches protect against prolonged submersion.

For technical drawings and 3-D models, click on a part number.

Switches accept both AC and DC input voltage. Also known as capacitive proximity switches, they remotely sense both metallic and nonmetallic objects but their strength is in sensing materials such as plastic, ceramic, and clear targets. All are projecting switches, and must be mounted with the area around the sensor face free of metal.

Switches with a plug connect to cables with a socket (sold separately), allowing you to quickly connect and disconnect the switch.

IP65 rated switches are protected from washdowns.

IP67 rated switches are protected from washdowns and temporary submersion.

Also available: If you don’t see the switch you need, please select 6693T999 and specify manufacturer and manufacturer part number.

For technical drawings and 3-D models, click on a part number.

For technical drawings and 3-D models, click on a part number.

The light touch of a finger turns circuits on and off without pressing down a contact. Program these switches to fit your application—control their color, pattern, and sensitivity. Change the color to show different process statuses. For more visibility, change the intensity of the color or choose a light pattern. These switches can flash, rotate, and show other patterns, all at speeds you can control. To change how much force they need to actuate, alter the sensitivity. With a high sensitivity, they’ll actuate even if you’re wearing gloves. With a low sensitivity, they’re more resistant to accidental actuation.

To program your switch, download the free Banner Pro Editor Software. You’ll need a switch programming kit (sold separately) to connect your switch to the software.

Switches with a copolyester base are FDA compliant for incidental food contact once installed.

Switches with an audible alarm can be programmed to 12 different tones ranging from sirens to melodies.

For technical drawings and 3-D models, click on a part number.

Flat and completely smooth, these switches are easy to wipe down. They’re rated NEMA 3R, so they seal out water that could damage the circuitry. They also won’t corrode from mild cleaning solutions. With just a light tap, you can switch lights on and off, even if you’re wearing gloves.

Switches with a stainless steel wall plate resist wear and tear better than switches with a plastic wall plate.

Cut the probes on these switches to fit the size of your tank. They’re designed to use the properties of conductive liquid for operation, and actuate when conductive liquid reaches the probes to close the circuit. Do not use in flammable liquids. Mount them vertically through the top of your tank.

Switches with two probes detect one level change.

Switches with three probes detect two level changes, so they can activate your equipment when your tank is empty and when it’s full.

For technical drawings and 3-D models, click on a part number.

Measure the level of conductive liquids without drilling a hole in your tank—these switches mount to the outside of the tank and track the capacitance between them and the tank’s contents. Use them on nonconductive plastic or glass wall tanks; they’re not compatible with metal tanks. They automatically adapt to your tank’s wall thickness, making them ready to use. These switches only respond when the liquid reaches the desired level, so foam and residue on the top of the liquid won’t trigger them early. For even more challenging setups, such as those with thick, sticky fluids, or if your tank has walls as thick as 10 mm, you can teach these switches to avoid false detections. All have LED indicators to show their power and output status.

Made of plastic, their body is chemical resistant and NEMA and IP rated, so it keeps out dust and dirt, as well as drips of oil and jets of hot water. UL listed, C-UL listed, and CE marked, they meet U.S., Canadian, and European Union safety standards.

Mount these switches directly on your sight glass using their adhesive back or use the included mounting bracket if you’ll need to remove them frequently. They also include foam pads for mounting them using straps around the outside of your tank.

PNP switches communicate with your system by sending a positive signal. NPN switches send a negative signal to communicate with your system.

Switches with an M8 4-pin connection have a standard plug that’s easy to connect. Switches with wire leads need to be hardwired, so use them in applications where you won’t move them often.

For technical drawings and 3-D models, click on a part number.