Choose this lock to use your own compatible lock cylinder to match the keying of an existing system. Each lock comes with a straight cam and a reversible offset cam to accommodate different latching distances. These locks can be used with Lock Cylinders for Cam and Deadbolt Cabinet and Drawer Locks.

For technical drawings and 3-D models, click on a part number.

Secure enclosure doors with these T-handle latches. All have a cam that rotates to keep doors closed.

Latches with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed distance.

For technical drawings and 3-D models, click on a part number.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed. To latch, turn the knob a quarter-turn to draw the cam against the door or drawer surface. A quarter-turn in the opposite direction releases the tension and opens the door or drawer.

For technical drawings and 3-D models, click on a part number.

With a finger-grip knob, these latches fit where latches with handles won't. Select the turn direction of these latches when mounting the cam. The cam rotates to secure your enclosure.

Latches with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. To set the latching distance, turn the collar under the knob. They project further into the enclosure than those with a fixed distance.

For technical drawings and 3-D models, click on a part number.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed. To latch, turn the knob a quarter-turn to draw the cam against the door or drawer surface. A quarter-turn in the opposite direction releases the tension and opens the door or drawer.

Latches with a serrated-spring cam hold tighter than those with a smooth-spring cam, making them best for applications with vibration.

For technical drawings and 3-D models, click on a part number.

Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment. To latch, turn the knob a quarter-turn and then continue to turn it to draw the cam firmly against the door or drawer surface.

For styles A-C, select the turn direction of the latch when mounting the cam. For styles D-G, turn the latch counterclockwise to open.

For technical drawings and 3-D models, click on a part number.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets. The handle and latch are each sold separately. Select the turn direction of the latch when mounting the cam.

For technical drawings and 3-D models, click on a part number.

Choose this keyed alike lock if you need several that open with the same key. Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors. The lock has two handles; an outside handle with a spindle that mounts through the door and an inside safety-release handle that opens the latch even if the outside handle is locked. It has a straight cam for side latching. For top and bottom latching, rods connect the top and bottom slide bolts. Use a hacksaw to cut rods and spindle to size. Select the turn direction of the lock when mounting the cam.

Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors. This padlockable latch has two handles; an outside handle with a spindle that mounts through the door and an inside safety-release handle that opens the latch even if the outside handle is locked. It has a straight cam for side latching. For top and bottom latching, rods connect the top and bottom slide bolts. Use a hacksaw to cut rods and spindle to size. Select the turn direction of the latch when mounting the cam.

Use these latches alone for single-point latching. Add latch kits for multiple-point latching to create additional holding power.

Style A-C latches arrive ready for single-point latching; add a latch kit for two-point latching or two latch kits for three-point latching.

Style A latches allow selecting the turn direction when mounting the cam. They come with a reversible offset cam to provide variable latching-distance ranges depending on the cam position.

Style B latches allow selecting the turn direction when mounting the cam.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need several that open with the same key. Locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately).

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Use these latches alone for single-point latching. Add latch kits (sold separately) for multiple-point latching and extra holding power.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Choose these L-handle locks if you need several that open with the same key. Use them for single-point latching, or add latch kits (sold separately) for multiple-point latching to create additional holding power.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.

For technical drawings and 3-D models, click on a part number.