Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for washdowns. All open with a slotted screwdriver, so they’re good for areas where you don’t want a complicated keying system.

A spring-loaded bushing keeps your door from vibrating open. These locks open and close with a slotted screwdriver, so they’re great if you want a simple keying system for your enclosure.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. Also known as compression cam locks, these create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

Ideal for high-vibration environments, these locks create a tighter hold than standard cam locks.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Offering more security than standard keyed alike cam locks, they have circular keys that are difficult to duplicate.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. All open with a square key, so they're more secure than locks that open with a hex or slotted driver.

A spring-loaded bushing keeps your enclosure door from vibrating open. These locks combine the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn cam lock.

A gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in food processing plants.

For a simplified keying system, these cam locks open with a hex key (not included).

Install these locks in smaller-than-standard diameter through holes to secure enclosure doors and file drawers. They open with a hex key, so they’re great for a facility where you don’t need a complicated keying system.

Trigger a light, alarm, or other device to signal your door is unlocked. These locks open with a hex key for a simple keying system.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

A spring-loaded bushing keeps your enclosure door from vibrating open. These locks combine the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn cam lock.

Designed for smaller-than-standard-diameter through holes, these locks are often installed in cabinet doors. They open with a triangle key, so they’re more secure than locks that open with a hex or slotted driver.

An O-ring keeps water from entering through the lock during high-temperature, high-pressure washdowns. This helps you maintain an IP69K rating on sealed enclosures, such as those found in food processing plants.

Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a two-way key. Also known as a double-bit key, it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver.

Trigger a light, alarm, or other device to signal your door is unlocked.

Help keep your sealed enclosure's contents safe from water damage—these locks help maintain an enclosure's IP or NEMA rating for low-pressure washdowns.

A master key opens all of these locks, which also have their own unique keys.

A hex key (not included) opens and closes these cam locks, simplifying your keying system. Also known as quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.

The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.

A key shutter on these locks keeps low-pressure washdowns and dust from entering the lock cylinder and causing damage. This helps you maintain an IP65 rating on sealed enclosures.

Open these locks with both a master key and their own unique key.

A gasket helps keep dust and low-pressure washdowns from entering through these locks. This helps you maintain your sealed enclosure's IP or NEMA rating. Press the button to pop the handle out; push the handle shut for a secure hold. Also known as compression cam locks, the lever on these locks creates a tighter hold than traditional cam locks.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need locks that each open with a different key.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.

Install these latches on cabinet doors and file drawers with smaller-than-standard diameter through holes. The wing handle makes it harder for clothing and straps to snag on them than cam latches with a T- or L-handle.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. All have a wing handle that makes it harder to snag straps and other items on them than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch.

Fold the ring handle into the recess to stay out of the way when not in use.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.

Grip and turn the ring handle to open and close doors and drawers, then fold it out of the way when you are done.

Simplify your enclosure’s keying system—these locks open and close with a slotted screwdriver. Add a padlock for extra security.

Keep the contents of your sealed enclosure safe from water damage with these locks that help maintain the enclosure's IP or NEMA rating for low-pressure washdowns. All can be locked with a key as well as a padlock for added security.

Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for low- or high-pressure washdowns. Often installed on electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door.

For a simple yet secure keying system, these locks open with a two-way key (sold separately), also called a double-bit key. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.

Secure these latches with a padlock.

Great for a facility where you don’t want a complicated keying system, these locks open with a slotted screwdriver. They’re also padlockable for extra security.

Give multiple people access to secured items or equipment in washdown areas without requiring keys. A gasket prevents low-pressure washdowns, dust, and dirt from getting into an enclosure through the lock.

The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.