Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for washdowns. All open with a slotted screwdriver, so they’re good for areas where you don’t want a complicated keying system.

A spring-loaded bushing keeps your door from vibrating open. These locks open and close with a slotted screwdriver, so they’re great if you want a simple keying system for your enclosure.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. Also known as compression cam locks, these create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

Ideal for high-vibration environments, these locks create a tighter hold than standard cam locks.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.

Quickly spot if these locks are open—a red indicator appears on the lock face or a spring-loaded cover pops up when they’re unlocked. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

Prevent cabinet doors, drawers, and other enclosures with smaller-than-standard diameter through holes from vibrating open. Also known as compression cam locks, these locks create a tighter hold than standard cam locks, making them useful for doors that have a seal. These locks open with a square key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery.

A spring-loaded bushing keeps your enclosure door from vibrating open. These locks combine the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn cam lock.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All open with a square key, so they're more secure than locks that open with a hex or slotted driver.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.

A gasket stops water from getting past these locks during high-pressure, high-temperature washdowns common in food processing plants. They lock with a hex key, so they’re great if you don’t want to keep a complicated keying system.

Install these locks in smaller-than-standard diameter through holes to secure enclosure doors and file drawers. They open with a hex key, so they’re great for a facility where you don’t need a complicated keying system.

Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a female hex key (sold separately), so they match a keying system that’s common for industrial enclosures and other machinery but are more secure than locks that open with a male hex key or screwdriver.

Open these locks with a triangle key—it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.

An gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in labs.

A spring-loaded bushing keeps your enclosure door from vibrating open. These locks combine the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn cam lock.

Designed for food-processing and hygienic applications, these locks are FDA compliant for direct contact with food. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

A seal helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock.

An O-ring keeps water from entering through the lock during high-temperature, high-pressure washdowns. This helps you maintain an IP69K rating on sealed enclosures, such as those found in food processing plants.

Open these locks with a two-way key. Also known as a double-bit key, it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.

Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a two-way key. Also known as a double-bit key, it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver.

Quickly snap these locks into a through-hole cutout—no need to fasten them with a screw. These locks open with a two-way key, also called a double-bit key. This means they match a keying system that’s common for industrial enclosures, but they’re more secure than locks that open with a hex key or screwdriver.

Help keep your sealed enclosure's contents safe from water damage—these locks help maintain an enclosure's IP or NEMA rating for low-pressure washdowns.

When installed on sealed assemblies, these locks guard against dust, dirt, and low-pressure washdowns. All are keyed alike, so they're best if you need several locks that open with the same key.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Choose these locks if you need several locks that open with the same key.

A gasket helps keep dust and low-pressure washdowns from entering through these locks. This helps you maintain your sealed enclosure's IP or NEMA rating. Press the button to pop the handle out; push the handle shut for a secure hold. Also known as compression cam locks, the lever on these locks creates a tighter hold than traditional cam locks.

Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. When you close them, a lever raises to tightly press your door or drawer shut with an attached screw.

It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

Wire these locks to a card reader, manual release button, or other access system to remotely open an enclosure door. In case of an emergency, manually open these locks with a key.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.

It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch, making them useful for doors that have a seal.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. A gasket helps keep dust and low-pressure washdowns from entering through the latch. It’s harder to snag straps and other items on these latches than on T- or L-handle latches.

The knob on these latches is easy to grip and less likely to snag straps or clothing than T- or L-handle latches. Also known as compression cam latches, these latches create a tighter hold than a traditional cam latch, so they’re useful for doors with a seal.

Prevent water, dust, and dirt from getting into a sealed enclosure through the latch. Press the button and the handle pops out; push the handle shut for a secure hold.

To help keep the contents of a sealed enclosure safe from water damage, these padlockable latches help maintain the enclosure's IP or NEMA rating for low-pressure washdowns.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down to reach full compression. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

A hex key opens these locks, making them great for a facility where you don’t want a complicated keying system. Add a padlock for extra security.

A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches.

Multiple gaskets help keep dust and high-pressure washdowns from entering through these latches. This helps you maintain your sealed enclosure's IP or NEMA rating. Often installed on server cabinets and electrical panels, these latches have a handle that swings smoothly when you lift it to latch and unlatch the door.

Open and close these locks with a hex key (not included) for an uncomplicated keying system. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.

Open these locks with a triangle key (sold separately)—it’s more secure than a hex key or screwdriver. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.

More secure than locks that open with a hex or slotted driver, these locks open with a square key. Add a padlock for extra security.