Designed for food-processing and hygienic applications, these locks are FDA compliant for direct contact with food. They have a smooth finish and round edges, so there are no crevices for contaminants to collect in. A seal helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in food processing plants. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration.

Made of stainless steel, these locks won’t break down in areas that are constantly exposed to moisture. All of the cams in the locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with straight and offset cams include multiple cams, so you can change the fixed latching distance.

These locks open with a square key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. However, they’re less secure than other square-drive locks with a concealed design because the square sticking out from the lock is easier to tamper with using pliers.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in food processing plants. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure your enclosure. All include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance.

These locks open with a square key (sold separately), so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.

Stainless steel and plastic locks are more corrosion resistant than zinc locks. They won’t corrode in areas that are constantly exposed to moisture. Plastic locks are also nonconductive and lighter in weight.

For technical drawings and 3-D models, click on a part number.

A gasket stops water from getting past these locks during high-pressure, high-temperature washdowns common in food processing plants. This helps you maintain a sealed enclosure's IP rating. Also known as quarter-turn locks, these locks rotate a cam 90° to secure your door or drawer. They lock with a hex key, so they’re great if you don’t want to keep a complicated keying system. Made of stainless steel, they resist corrosion, even when exposed to constant moisture. These locks come with multiple cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in labs. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure your enclosure. All include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance.

These locks open with a triangle key (sold separately), so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.

Stainless steel and plastic locks are more corrosion resistant than zinc locks, so they’re best for areas that are constantly exposed to moisture. Plastic locks are also nonconductive and lighter in weight.

For technical drawings and 3-D models, click on a part number.

Designed for food-processing and hygienic applications, these locks are FDA compliant for direct contact with food. They have a smooth finish and round edges, so there are no crevices for contaminants to collect in. A seal helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in food processing plants. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration.

Made of stainless steel, these locks won’t break down in areas that are constantly exposed to moisture. They include multiple cams, so you can change the fixed latching distance. Since you won’t have to adjust the cams into position, these are faster to install than those with an adjustable latching distance.

These locks open with a triangle key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.

For technical drawings and 3-D models, click on a part number.

A seal helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in food processing plants. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration.

These locks open with a triangle key (sold separately), so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.

Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance. All include multiple cams, so you can change the fixed latching distance.

Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed distance.

Use stainless steel locks in areas that are constantly exposed to moisture since they resist corrosion better than zinc locks.

For locks with mounting holes, the installation hole can be made with a round hole instead of the irregularly shaped standard cam hole. This is especially helpful if the material of the door is difficult to cut or part of an existing structure. Push the lock into your through hole and secure it with fasteners so it won’t rotate as you turn the head. These locks are flush with the surface, so you won’t bump into or catch clothes on them.

For technical drawings and 3-D models, click on a part number.

An O-ring keeps water from entering through the lock during high-pressure, high-temperature washdowns. This helps you maintain an IP69K rating on sealed enclosures, such as those found in food processing plants. Open these locks with a two-way key (sold separately). Often called a double-bit key, it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver. These locks also have a flat, concealed design that stops others from tampering with them using pliers.

To accommodate different latching distances, these locks come with three cams. Each cam has a fixed latching distance. Since you won’t have to adjust the cams into position, they’re quick to install. The cam rotates 90° to secure your enclosure, so these locks are also known as quarter-turn locks.

Stainless steel and plastic locks are more corrosion resistant than zinc locks. Plastic locks are the lightest in weight and do not conduct electricity. However, they’re easier to drill into compared to metal locks.

For technical drawings and 3-D models, click on a part number.

An O-ring keeps water from entering through the lock during high-pressure, high-temperature washdowns. This helps you maintain an IP69K rating on sealed enclosures, such as those in food processing plants. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration.

These locks open with a two-way key (sold separately). Also known as a double-bit key, it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver. These locks also have a flat, concealed design that stops others from tampering with them using pliers.

Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, they’re faster to install than locks with an adjustable latching distance. To accommodate different latching distances, they come with multiple cams.

Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before installing. They project further into the enclosure than those with a fixed latching distance.

Stainless steel locks resist corrosion better than zinc locks. They won’t rust in areas constantly exposed to moisture.

For locks with mounting holes, the installation hole can be made with a round hole instead of the irregularly shaped standard cam hole. This is especially helpful if the material of the door is difficult to cut or part of an existing structure. These locks are flush with the surface, so you won’t bump into or catch clothes on them.

For technical drawings and 3-D models, click on a part number.

Designed for food-processing and hygienic applications, this corrosion-resistant latch is FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food. It comes with one straight and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Designed for food-processing and hygienic applications, this corrosion-resistant latch is FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food. It comes with one straight and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.