Large-Capacity Economy Electronic Calipers
Deep jaws and extra-long measuring ranges make measuring large material easier. Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the caliper is turned off. A zero-set button allows you to start measuring at any point.
Calipers with SPC data output transmit data to your PC. Those with a USB connection require a USB data cable (sold separately). Calipers with a carbon fiber beam are lighter than stainless steel calipers. Rated IP65, they’ll stay protected in machining conditions with dust and spraying water or coolant.
Calipers | 7 1/2 ft. USB Data Cables | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Overall Lg. | Body Material | Jaw Material | Jaw Dp. | Batteries Included | Environmental Rating | Each | Each | ||
With SPC Data Output and USB Connection | ||||||||||||
| 0"-24" 0 mm-600 mm | ±0.002" ±0.050 mm | 0.0005" 0.01 mm | 33" | Carbon Fiber | Stainless Steel | 5 3/8" | Yes | IP65 | 00000000 | 0000000 | 00000000 | 0000000 |
| 0"-40" 0 mm-1,000 mm | ±0.003" ±0.080 mm | 0.0005" 0.01 mm | 49" | Carbon Fiber | Stainless Steel | 5 3/8" | Yes | IP65 | 00000000 | 000000 | 00000000 | 000000 |
| 0"-60" 0 mm-1,500 mm | ±0.006" ±0.15 mm | 0.0005" 0.01 mm | 69" | Carbon Fiber | Stainless Steel | 5 7/8" | Yes | IP65 | 00000000 | 00000000 | 00000000 | 000000 |
| Pkg. Qty. | Pkg. | |
| 1 | 0000000 | 00000 |
Coolant-Resistant Starrett Electronic Calipers
IP67 rated for protection from dust and temporary water submersion. Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the caliper is turned off. A zero-set button lets you start measuring at any point.
USB data cable (sold separately) connects calipers with SPC data output directly to your PC.
Depth base attachment (sold separately) stabilizes your caliper when taking depth measurements.
Measuring Range | Accuracy | Measuring Increments | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Overall Lg. | Body Material | Jaw Material | Jaw Dp. | Batteries Included | Manufacturer Model Number | Each | |
Without SPC Data Output | |||||||||||||
| 0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 9 1/4" | Stainless Steel | Stainless Steel | 1 1/2" | Yes | 798A-6/150 | 0000000 | 0000000 |
| 0"-8" | 0 mm-200 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 11 1/2" | Stainless Steel | Stainless Steel | 1 7/8" | Yes | 798A-8/200 | 0000000 | 000000 |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 15 1/4" | Stainless Steel | Stainless Steel | 2 1/2" | Yes | 798A-12/300 | 0000000 | 000000 |
With SPC Data Output | |||||||||||||
| 0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 9 1/4" | Stainless Steel | Stainless Steel | 1 1/2" | Yes | 798B-6/150 | 0000000 | 000000 |
| 0"-8" | 0 mm-200 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 11 1/2" | Stainless Steel | Stainless Steel | 1 7/8" | Yes | 798B-8/200 | 0000000 | 000000 |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 15 1/4" | Stainless Steel | Stainless Steel | 2 1/2" | Yes | 798B-12/300 | 0000000 | 000000 |
| For Caliper Measuring Range | Pkg. Qty. | Each | ||
| USB Data Cable | __ | __ | 0000000 | 0000000 |
| Depth Base Attachment | 0"-6", 0"-8", 0 mm-150 mm, 0 mm-200 mm | __ | 00000000 | 00000 |
| Replacement Case | 0"-6", 0 mm-150 mm | __ | 0000000 | 00000 |
| Replacement Case | 0"-8", 0 mm-200 mm | __ | 0000000 | 00000 |
| Replacement Case | 0"-12", 0 mm-300 mm | __ | 0000000 | 00000 |
| Pkg. | ||||
|---|---|---|---|---|
| Replacement Battery | __ | 1 | 0000000 | 0000 |
Coolant-Resistant Starrett Electronic Calipers with Calibration Certificate
These calipers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They’re IP67 rated for protection from dust and temporary water submersion.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the caliper is turned off. A zero-set button lets you start measuring at any point.
USB data cable (sold separately) connects calipers with SPC data output directly to your PC.
Depth base attachment (sold separately) stabilizes your caliper when taking depth measurements.
Measuring Range | Accuracy | Measuring Increments | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Overall Lg. | Body Material | Jaw Material | Jaw Dp. | Batteries Included | Manufacturer Model Number | Each | |
Without SPC Data Output | |||||||||||||
| 0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 9 1/4" | Stainless Steel | Stainless Steel | 1 1/2" | Yes | 798A-6/150 | 0000000 | 0000000 |
| 0"-8" | 0 mm-200 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 11 1/2" | Stainless Steel | Stainless Steel | 1 7/8" | Yes | 798A-8/200 | 0000000 | 000000 |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 15 1/4" | Stainless Steel | Stainless Steel | 2 1/2" | Yes | 798A-12/300 | 0000000 | 000000 |
With SPC Data Output | |||||||||||||
| 0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 9 1/4" | Stainless Steel | Stainless Steel | 1 1/2" | Yes | 798B-6/150 | 0000000 | 000000 |
| 0"-8" | 0 mm-200 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 11 1/2" | Stainless Steel | Stainless Steel | 1 7/8" | Yes | 798B-8/200 | 0000000 | 000000 |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 15 1/4" | Stainless Steel | Stainless Steel | 2 1/2" | Yes | 798B-12/300 | 0000000 | 000000 |
| For Caliper Measuring Range | Pkg. Qty. | Each | ||
| USB Data Cable | __ | __ | 0000000 | 0000000 |
| Depth Base Attachment | 0"-6", 0"-8", 0 mm-150 mm, 0 mm-200 mm | __ | 00000000 | 00000 |
| Replacement Case | 0"-6", 0 mm-150 mm | __ | 0000000 | 00000 |
| Replacement Case | 0"-8", 0 mm-200 mm | __ | 0000000 | 00000 |
| Replacement Case | 0"-12", 0 mm-300 mm | __ | 0000000 | 00000 |
| Pkg. | ||||
|---|---|---|---|---|
| Replacement Battery | __ | 1 | 0000000 | 0000 |
Coolant-Resistant Mitutoyo Electronic Outside Micrometers
IP65 rated for protection from dust and water jets. These micrometers have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the micrometer is turned off. A zero-set button allows you to start measuring at any point.
All micrometers have thimbles with a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
Friction thimbles continue to turn with resistance when the micrometer’s spindle stops tightening.
Ratchet thimbles have a speeder knob to reduce the time it takes to open and close the micrometer. When the spindle stops tightening, the thimble will continue turning with a clicking sound.
Ratchet-stop thimbles have a speeder knob to reduce the time it takes to open and close the micrometer. When the spindle stops tightening, the thimble stops turning, but the speeder knob will continue turning with a clicking sound.
USB data cable (sold separately) connects micrometers with SPC data output directly to your PC.
10-pin data cables (sold separately) connect micrometers with SPC data output to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from micrometers with SPC data output to your PC without being tethered by a cable.
Micrometers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring Range | Accuracy | Measuring Increments | Replacement Cases | ||||||||||
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Frame Material | Batteries Included | Manufacturer Model Number | Each | Each | ||
Micrometers | |||||||||||||
Without SPC Data Output—Friction Thimble | |||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-348-30 | 0000000 | 0000000 | 0000000 | 000000 |
Without SPC Data Output—Ratchet Thimble | |||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.0001" | ±0.0025 mm | 0.0001" | 0.001 mm | 1" | Cast Iron | Yes | 293-349-30 | 0000000 | 000000 | 0000000 | 00000 |
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-344-30 | 0000000 | 000000 | 0000000 | 00000 |
| 1"-2" | 25.4 mm-50.8 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 1/4" | Cast Iron | Yes | 293-345-30 | 0000000 | 000000 | 0000000 | 00000 |
| 2"-3" | 50.8 mm-76.2 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 7/8" | Cast Iron | Yes | 293-346-30 | 0000000 | 000000 | 000000 | 00 |
Without SPC Data Output—Ratchet-Stop Thimble | |||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-340-30 | 0000000 | 000000 | 0000000 | 00000 |
| 1"-2" | 25.4 mm-50.8 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 1/4" | Cast Iron | Yes | 293-341-30 | 0000000 | 000000 | 0000000 | 00000 |
| 2"-3" | 50.8 mm-76.2 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 7/8" | Cast Iron | Yes | 293-342-30 | 0000000 | 000000 | 000000 | 00 |
| 3"-4" | 76.2 mm-101.6 mm | ±0.0001" | ±0.001 mm | 0.00005" | 0.001 mm | 2 3/8" | Cast Iron | Yes | 293-343-30 | 0000000 | 000000 | 000000 | 00 |
With SPC Data Output—Friction Thimble | |||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-335-30 | 000000 | 000000 | 0000000 | 00000 |
| 1"-2" | 25.4 mm-50.8 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 1/4" | Cast Iron | Yes | 293-336-30 | 000000 | 000000 | 000000 | 00 |
With SPC Data Output—Ratchet Thimble | |||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.0025 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-334-30 | 0000000 | 000000 | 0000000 | 00000 |
With SPC Data Output—Ratchet-Stop Thimble | |||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-330-30 | 000000 | 000000 | 0000000 | 00000 |
| 1"-2" | 25.4 mm-50.8 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 1/4" | Cast Iron | Yes | 293-331-30 | 000000 | 000000 | 0000000 | 00000 |
| 2"-3" | 50.8 mm-76.2 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 7/8" | Cast Iron | Yes | 293-332-30 | 000000 | 000000 | 000000 | 00 |
| 3"-4" | 76.2 mm-101.6 mm | ±0.0001" | ±0.0025 mm | 0.00005" | 0.001 mm | 2 3/8" | Cast Iron | Yes | 293-333-30 | 0000000 | 000000 | 000000 | 00 |
| 4"-5" | 101.6 mm-127 mm | ±0.0001" | ±0.0025 mm | 0.0001" | 0.001 mm | 3" | Cast Iron | Yes | 293-350-30 | 0000000 | 000000 | 000000 | 00 |
| 5"-6" | 127 mm-152.4 mm | ±0.0001" | ±0.0025 mm | 0.0001" | 0.001 mm | 3 1/2" | Cast Iron | Yes | 293-351-30 | 0000000 | 000000 | 000000 | 00 |
Coolant-Resistant Mitutoyo Electronic Outside
Micrometers with Calibration Certificate
These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They’re IP65 rated for protection from dust and water jets. Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button allows you to start measuring at any point.
All micrometers have thimbles with a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
Friction thimbles continue to turn with resistance when the micrometer’s spindle stops tightening.
Ratchet thimbles have a speeder knob to reduce the time it takes to open and close the micrometer. When the spindle stops tightening, the thimble will continue turning with a clicking sound.
Ratchet-stop thimbles have a speeder knob to reduce the time it takes to open and close the micrometer. When the spindle stops tightening, the thimble stops turning, but the speeder knob will continue turning with a clicking sound.
USB data cable (sold separately) connects micrometers with SPC data output directly to your PC.
10-pin data cables (sold separately) connect micrometers with SPC data output to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from micrometers with SPC data output to your PC without being tethered by a cable.
Micrometers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring Range | Accuracy | Measuring Increments | Replacement Cases | |||||||||||
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Frame Material | Batteries Included | Manufacturer Model Number | Specifications Met | Each | Each | ||
Micrometers | ||||||||||||||
Without SPC Data Output—Friction Thimble | ||||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-348-30 | TUV Rheinland Certified | 0000000 | 0000000 | 0000000 | 000000 |
Without SPC Data Output—Ratchet Thimble | ||||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.0001" | ±0.0025 mm | 0.0001" | 0.001 mm | 1" | Cast Iron | Yes | 293-349-30 | TUV Rheinland Certified | 0000000 | 000000 | 0000000 | 00000 |
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-344-30 | TUV Rheinland Certified | 0000000 | 000000 | 0000000 | 00000 |
| 1"-2" | 25.4 mm-50.8 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 1/4" | Cast Iron | Yes | 293-345-30 | TUV Rheinland Certified | 0000000 | 000000 | 0000000 | 00000 |
| 2"-3" | 50.8 mm-76.2 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 7/8" | Cast Iron | Yes | 293-346-30 | TUV Rheinland Certified | 0000000 | 000000 | 000000 | 00 |
Without SPC Data Output—Ratchet-Stop Thimble | ||||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-340-30 | TUV Rheinland Certified | 0000000 | 000000 | 0000000 | 00000 |
With SPC Data Output—Friction Thimble | ||||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-335-30 | TUV Rheinland Certified | 0000000 | 000000 | 0000000 | 00000 |
| 1"-2" | 25.4 mm-50.8 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 1/4" | Cast Iron | Yes | 293-336-30 | TUV Rheinland Certified | 0000000 | 000000 | 000000 | 00 |
With SPC Data Output—Ratchet-Stop Thimble | ||||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | 293-330-30 | TUV Rheinland Certified | 0000000 | 000000 | 0000000 | 00000 |
| 1"-2" | 25.4 mm-50.8 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 1/4" | Cast Iron | Yes | 293-331-30 | TUV Rheinland Certified | 0000000 | 000000 | 0000000 | 00000 |
| 2"-3" | 50.8 mm-76.2 mm | ±0.00005" | ±0.001 mm | 0.00005" | 0.001 mm | 1 7/8" | Cast Iron | Yes | 293-332-30 | TUV Rheinland Certified | 0000000 | 000000 | 000000 | 00 |
| 3"-4" | 76.2 mm-101.6 mm | ±0.0001" | ±0.0025 mm | 0.00005" | 0.001 mm | 2 3/8" | Cast Iron | Yes | 293-333-30 | TUV Rheinland Certified | 0000000 | 000000 | 000000 | 00 |
| 4"-5" | 101.6 mm-127 mm | ±0.0001" | ±0.0025 mm | 0.0001" | 0.001 mm | 3" | Cast Iron | Yes | 293-350-30 | TUV Rheinland Certified | 0000000 | 000000 | 000000 | 00 |
| 5"-6" | 127 mm-152.4 mm | ±0.0001" | ±0.0025 mm | 0.0001" | 0.001 mm | 3 1/2" | Cast Iron | Yes | 293-351-30 | TUV Rheinland Certified | 0000000 | 000000 | 000000 | 00 |
Coolant-Resistant Economy Electronic Outside Micrometers
Take measurements in dirty machining environments—these micrometers are rated IP65, so they seal out coolant, water, and dust. They have zero-position memory, also known as absolute (ABS) positioning, so they stay in the same measuring position after the indicator is turned off. Press the zero-set button to start measuring at any point.
These micrometers have a speeder knob that reduces the time it takes to open and close around your part. To prevent overtightening and ensure repeatable measurements, they have a ratchet-stop thimble that stops the spindle from turning once it reaches your part. You'll still be able to turn the speeder knob, but it will click instead of tighten.
Connect a USB cable (sold separately) between the micrometer and your PC. Press the SPC data output button to transfer your measurement data.
Measuring Range | Accuracy | Measuring Increments | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Frame Material | Batteries Included | Each | |
With SPC Data Output—Ratchet Thimble | ||||||||||
| 0"-1" | 0 mm-25 mm | ±0.00015" | ±0.004 mm | 0.00005" | 0.001 mm | 15/16" | Steel | Yes | 0000000 | 000000 |
| 1"-2" | 25 mm-50 mm | ±0.00015" | ±0.004 mm | 0.00005" | 0.001 mm | 1 1/4" | Steel | Yes | 0000000 | 000000 |
| 2"-3" | 50 mm-75 mm | ±0.00015" | ±0.004 mm | 0.00005" | 0.001 mm | 1 3/4" | Steel | Yes | 0000000 | 000000 |
| 3"-4" | 75 mm-100 mm | ±0.00015" | ±0.004 mm | 0.00005" | 0.001 mm | 2 3/16" | Steel | Yes | 0000000 | 000000 |
Mitutoyo Electronic Outside Micrometer Sets
A screen makes measurements easy to read. The micrometers in these sets have a speeder knob that reduces the time it takes to open and close around your part. To prevent overtightening, they have a ratchet-stop thimble that keeps the spindle from turning once it reaches your part. You'll still be able to turn the speeder knob, but it will click instead of tighten. Use them in machine shops where it’s dusty, wet, or exposed to coolant because they’re IP65 rated.
All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the micrometer is off. A zero-set button lets you start measuring at any point.
| Number of Micrometers | Measuring Range | Measuring Increments | Frame Material | Batteries Included | Includes | Features | Manufacturer Model Number | Each | |
Ratchet-Stop Thimble | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3 | 0"-3" 0 mm-76.2 mm | 0.00005" 0.001 mm | Steel | Yes | One Micrometer (0"-1" Measuring Range, ±0.00005" Measuring Accuracy), One Micrometer (1"-2" Measuring Range, ±0.00005" Measuring Accuracy), One Micrometer (2"-3" Measuring Range, ±0.00005" Measuring Accuracy) | Zero-Position Memory (ABS), Zero-Set Button | 293-960-30 | 0000000 | 0000000 |
Economy Electronic Outside Micrometer Sets
Easily read measurements displayed on the screen. The micrometers in these sets have ratchet thimbles, which continue turning with an audible clicking sound once the spindle reaches your part. This prevents over-tightening. They also have a speeder knob to reduce the time it takes to open and close the micrometer. Use them in machine shops where it’s dusty, wet, or exposed to coolant because they’re IP rated.
All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the micrometer is off. A zero-set button lets you start measuring at any point.
Measuring Range | Measuring Increments | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Micrometers | Inch | Metric | Inch | Metric | Frame Material | Thimble Type | Batteries Included | Environmental Rating | Features | Includes | Each | |
| 3 | 0"-3" | 0 mm-75 mm | 0.00005" | 0.001 mm | Steel | Ratchet | Yes | IP65 | Zero-Position Memory (ABS), Zero-Set Button | One Micrometer (0"-1" Measuring Range, ±0.00015" Measuring Accuracy), One Micrometer (1"-2" Measuring Range, ±0.00015" Measuring Accuracy), One Micrometer (2"-3" Measuring Range, ±0.0005" Measuring Accuracy) | 0000000 | 0000000 |
| 4 | 0"-4" | 0 mm-100 mm | 0.00005" | 0.001 mm | Steel | Ratchet | Yes | IP65 | Zero-Position Memory (ABS), Zero-Set Button | One Micrometer (0"-1" Measuring Range, ±0.00015" Measuring Accuracy), One Micrometer (1"-2" Measuring Range, ±0.00015" Measuring Accuracy), One Micrometer (2"-3" Measuring Range, ±0.0005" Measuring Accuracy), One Micrometer (3"-4" Measuring Range, ±0.0005" Measuring Accuracy) | 0000000 | 000000 |
Electronic Wide-Range Outside Micrometers with Calibration Certificate
These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Interchangeable anvils of varying lengths give them a wide measuring range. All are IP65 rated for protection from dust and water jets.
Each micrometer has a ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. The thimble also has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening. When the spindle stops tightening, the thimble stops turning, but the speeder knob will continue turning with a clicking sound.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the micrometer directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Frame Material | Batteries Included | Includes | Features | Mfr. | Mfr. Model No. | Each | |
Micrometers | ||||||||||||||
Ratchet-Stop Thimble | ||||||||||||||
| 0"-6" | 0 mm-152 mm | ±0.0003" | ±0.008 mm | 0.00005" | 0.001 mm | 3 1/2" | Cast Iron | Yes | Six Anvils, Five Calibration Rods | Vernier Scale, Zero-Position Memory (ABS), Zero-Set Button | Mitutoyo | 340-351-30 | 0000000 | 0000000 |
| 6"-12" | 152 mm-305 mm | ±0.0004" | ±0.010 mm | 0.0001" | 0.001 mm | 6 1/2" | Cast Iron | Yes | Six Anvils, Six Calibration Rods | Vernier Scale, Zero-Position Memory (ABS), Zero-Set Button | Mitutoyo | 340-352-30 | 0000000 | 00000000 |
Electronic Wide-Range Outside Micrometers
Interchangeable anvils of varying lengths give these micrometers a wide measuring range. They are IP65 rated for protection from dust and water jets. All have a ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. The thimble also has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening. When the spindle stops tightening, the thimble stops turning, but the speeder knob will continue turning with a clicking sound.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
Micrometers rated IP65 stay protected in machining conditions with dust and spraying water or coolant.
USB data cable (sold separately) connects the micrometer directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Frame Material | Batteries Included | Environmental Rating | Includes | Mfr. | Mfr. Model No. | Each | |
Micrometers | ||||||||||||||
Ratchet-Stop Thimble | ||||||||||||||
| 0"-6" | 0 mm-152 mm | ±0.0003" | ±0.008 mm | 0.00005" | 0.001 mm | 3 1/2" | Cast Iron | Yes | IP65 | Six Anvils, Five Calibration Rods | Mitutoyo | 340-351-30 | 0000000 | 0000000 |
| 6"-12" | 152 mm-305 mm | ±0.0004" | ±0.010 mm | 0.0001" | 0.001 mm | 6 1/2" | Cast Iron | Yes | IP65 | Six Anvils, Six Calibration Rods | Mitutoyo | 340-352-30 | 0000000 | 00000000 |
Coolant-Resistant Electronic Long-Reach Outside Micrometers
IP65 rated for protection from dust and water jets. This micrometer has an extra-deep throat for measuring sheet metal and other large items. It has a ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. The thimble also has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening. When the spindle stops tightening, the thimble stops turning, but the speeder knob will continue turning with a clicking sound.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the micrometer directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Throat Dp. | Inch | Metric | Inch | Metric | Inch | Metric | Frame Material | Batteries Included | Features | Manufacturer | Manufacturer Model Number | Specifications Met | Each | |
Micrometers | ||||||||||||||
Ratchet-Stop Thimble | ||||||||||||||
| 6" | 0"-1" | 0 mm-25.4 mm | ±0.0002" | ±0.005 mm | 0.001" | 0.025 mm | Cast Iron | Yes | Vernier Scale, Zero-Position Memory (ABS), Zero-Set Button | Mitutoyo | 389-351-30 | TUV Rheinland Certified | 00000000 | 0000000 |
Coolant-Resistant Electronic Long-Reach
Outside Micrometers with Calibration Certificate
This micrometer comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. It is IP65 rated for protection from dust and water jets. An extra-deep throat gives you a long reach for measuring sheet metal and other large items.
The micrometer’s ratchet-stop thimble has a speeder knob to reduce the time it takes to open and close the micrometer. It also has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening. When the spindle stops tightening, the thimble stops turning, but the speeder knob will continue turning with a clicking sound.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the micrometer directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Throat Dp. | Inch | Metric | Inch | Metric | Inch | Metric | Frame Material | Batteries Included | Features | Manufacturer | Manufacturer Model Number | Specifications Met | Each | |
Micrometers | ||||||||||||||
Ratchet-Stop Thimble | ||||||||||||||
| 6" | 0"-1" | 0 mm-25.4 mm | ±0.0002" | ±0.005 mm | 0.001" | 0.025 mm | Cast Iron | Yes | Vernier Scale, Zero-Position Memory (ABS), Zero-Set Button | Mitutoyo | 389-351-30 | TUV Rheinland Certified | 00000000 | 0000000 |
Electronic Outside Micrometers for Pipe, Tubing, and Flat Surfaces
Swap out the anvil on these micrometers for a better fit on curved and flat parts. Use the rounded anvil to measure the wall thickness of curved surfaces, such as pipe and tubing. Use the flat anvil to measure flat surfaces. These micrometers show measurements on an easy-to-read LCD screen. They have a friction thimble with a constant-force mechanism, so they stop tightening once the spindle touches the surface you’re measuring. This ensures repeatable measurements and prevents overtightening. Once the spindle stops tightening, the thimble continues turning with resistance.
All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. Since they have an SPC data output, you can connect them to your computer or data processor. IP rated, these micrometers protect against the dust, water, and coolant common in machine shops.
All accessories are sold separately.
USB data cable connects these micrometers to your PC.
10-pin data cables connect these micrometers to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver let you send measurements to your PC without a cable.
Measuring Range | Accuracy | Measuring Increments | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Frame Material | Batteries Included | Environmental Rating | Includes | Mfr. Model No. | Each | |
Mitutoyo Micrometers | |||||||||||||
Friction Thimble | |||||||||||||
| 0"-1" | 0 mm-25.4 mm | ±0.0002" | ±0.005 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | IP65 | Flat Anvil, Round Anvil | 317-351-30 | 0000000 | 0000000 |
| 1"-2" | 25.4 mm-50.8 mm | ±0.0002" | ±0.005 mm | 0.00005" | 0.001 mm | 1" | Cast Iron | Yes | IP65 | Flat Anvil, Round Anvil | 317-352-30 | 0000000 | 000000 |