Filter by
For Caliper Measurement Range
Material
Manufacturer Model Number
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Caliper Tip Sets
 |  |  |
Shown Installed | With Ball End, Conical, Flat, and Stem Tips | With Conical, Disk, and Stem Tips |
Attach to electronic, dial, and vernier calipers for the added versatility of measuring slots, inside pockets, shoulders, and holes.
For Caliper Measurement Range | Material | Includes | Each | ||
|---|---|---|---|---|---|
| 0" to 4", 0" to 6", 0" to 8" | Stainless Steel | Four Pairs of Tips (3/16" Dia. Ball End, 3/16" Dia. Conical, 3/16" Dia. Flat, 3/16" Dia. Stem) Hex Key Wrench Set Screws Two Tip Bodies | 00000000 | 000000 | |
| 0" to 6", 0" to 8", 0 mm to 150 mm, 0 mm to 200 mm | Stainless Steel | Three Pairs of Tips (10 mm Dia. Conical, 10 mm Dia. Disk, 2 mm Dia. Stem) Hex Key Wrench Set Screws Two Tip Bodies | 00000000 | 000000 |
Caliper Tips for Measuring Center-to-Center Distance
 |  |
Shown Installed |
Install these tips, also known as centerline gauges, onto the jaws of electronic, dial, and vernier calipers to measure the center-to-center distance between two holes. A 60° conical shape allows the tips to fit snugly into holes.
Caliper Depth Base Attachments
 |  |
Shown Installed |
Clamp onto electronic, dial, and vernier calipers to stabilize them when taking depth measurements.
Mitutoyo Caliper Depth Base Attachments
 |  |
Shown Installed |
These attachments clamp onto the end of Mitutoyo electronic, dial, and vernier calipers to stabilize them when taking depth measurements.
Mfr. Model No. | For Caliper Measurement Range | Lg. | Wd. | Ht. | Slot Wd. | Material | Includes | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 050083-10 | 0" to 4", 0" to 6", 0" to 8", 0 mm to 100 mm, 0 mm to 150 mm, 0 mm to 200 mm | 3" | 1/2" | 1 1/16" | 5/8" | Steel | Screw-Locking Clamp | 0000000 | 000000 | |
| 050085-10 | 0" to 12", 0 mm to 300 mm | 5" | 1/2" | 1 1/8" | 7/8" | Steel | Screw-Locking Clamp | 0000000 | 00000 |
Starrett Caliper Depth Base Attachments
 |  |
Shown Installed |
Attach to Starrett electronic and dial calipers to stabilize them when taking depth measurements.
Mfr. Model No. | For Caliper Measurement Range | Lg. | Wd. | Ht. | Slot Wd. | Material | Includes | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|
| PT22431 | 0" to 6", 0" to 8", 0" to 9", 0 mm to 150 mm, 0 mm to 200 mm, 0 mm to 225 mm | 3" | 1/4" | 1" | 5/8" | Stainless Steel | Screw-Locking Clamp | 00000000 | 000000 |
Mitutoyo Caliper Display Freeze Adapters
 |
Keep a measurement displayed on your tool even after repositioning.
Mfr. Model No. | For Mfr. Model No. | Each | ||
|---|---|---|---|---|
| 959143 | 500-170-30, 500-171-30, 500-172-30, 500-173, 500-505-10, 500-506-10, 500-507-10, 572-210-30, 572-211-20, 572-213-10 | 00000000 | 000000 |
Caliper Range Extenders
 |
Shown Installed |
 |
Expand electronic, dial, and vernier calipers to measure larger items. Extenders have two pins that project 1/2" when installed and act as jaws for the extension.
Caliper Range Extender Pins—1 1/2" caliper range extender pins are sold separately.
Caliper Tips, 0.62" Dia.—Use caliper tips to determine the center-to-center distance between holes. The tips taper to a sharp point.
Caliper Range Extenders | 1 1/2"-Projection Caliper Range Extender Pins | ||||||||
|---|---|---|---|---|---|---|---|---|---|
For Caliper Measurement Range | Lg. | Material | Includes | Each | Dia. | Each | |||
| 0" to 6" | 26" | Aluminum | 6" Lg. Calibration Rod, End Block, Mounting Hardware, Set Screw, Two 1/2" Lg. Caliper Range Extender Pins | 00000000 | 0000000 | 0.62" | 00000000 | 000000 | |
| 0" to 6" | 36" | Aluminum | 6" Lg. Calibration Rod, End Block, Mounting Hardware, Set Screw, Two 1/2" Lg. Caliper Range Extender Pins | 00000000 | 000000 | 0.62" | 00000000 | 00000 | |
| 0" to 6" | 51" | Aluminum | 6" Lg. Calibration Rod, End Block, Mounting Hardware, Set Screw, Two 1/2" Lg. Caliper Range Extender Pins | 00000000 | 000000 | 0.62" | 00000000 | 00000 | |
| 0" to 6" | 71" | Aluminum | 6" Lg. Calibration Rod, End Block, Mounting Hardware, Set Screw, Two 1/2" Lg. Caliper Range Extender Pins | 00000000 | 000000 | 0.62" | 00000000 | 00000 | |
| 0" to 6" | 91" | Aluminum | 6" Lg. Calibration Rod, End Block, Mounting Hardware, Set Screw, Two 1/2" Lg. Caliper Range Extender Pins | 00000000 | 000000 | 0.62" | 00000000 | 00000 | |
