We will reply to your message within an hour.
More
Use this general purpose cable to supply power to equipment.
After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.
This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn.
For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.
A thick rubber insulation resists cuts and abrasion, so this cable can be pulled over rough surfaces without damaging the wires inside.
The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.
Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.
Often used in computers, small electronics, and electronic prototyping, this cable is very flexible with small gauge wire to handle tight curves in narrow spaces.
Often used in mining equipment, submersible pumps, and drilling rigs, this cable withstands 2,000 volts AC/DC.
Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.
Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.
Also known as zip cord, this cable is often used in lamps, heat guns, and other small appliances.
Supply power to submersible pumps in water or oil wells.
Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.
The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission
Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.
A thick outer layer of silicone rubber insulation protects this cable from high voltages while remaining ultra flexible. It stands up to continuous motion without degrading data or signal transmission.
Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.
In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.
With a life span of more than 20 million high-speed flex cycles, this cable lasts twice as long as standard continuous-flex cable. The frequent motion will not degrade data or signal transmission.
For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.
Bend and flex this silicone-insulated cable in temperatures up to 350° F. It can keep moving in areas twice as hot as most other continuous-flex cables without degrading data or signal transmission.
Send data between computers, printers, servers, and switches.
Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.
Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.
Use this cable for complex and high-speed data and signal transmission.
This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.
Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.
Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.
Connect telephones and telephone blocks to a wall jack.
Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.
Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.
This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.
Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.
This cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.
Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.
Often used in electronic prototyping or in the interior of computers, this flat cable is ultra flexible with small-gauge wires so it fits in tight spaces.
Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.
This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.
Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.
After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with low-current circuits such as microphones and headsets.
The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.
Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.
Wire multiple components in your security system using a single cable.
This cable withstands abrasion, oil, and the rough conditions found in welding applications.
Approved for flame resistance, this cable meets Mine Safety and Health Administration (MSHA) standards. The insulation resists abrasion and chemicals.
Also known as hook-up wire, this wire is primarily used for wiring electrical panels, lighting, and plant floor equipment.
This wire meets stringent military specifications for material quality.
Keep spools of wire in multiple colors on hand.
Maintain a supply of Mil. Spec. wire in multiple colors.
More flexible than standard wire, this wire is often used for internal appliance wiring and machine tools. Also known as MTW wire.
Run power over rough surfaces—this wire has thick insulation that stands up to wear and tear.
Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.
The PEEK insulation on this wire won't degrade when exposed to radiation, and is often used in nuclear energy production.
Even at 480° F—hotter than some industrial ovens—this wire’s insulation won’t melt.
Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.
Keep several colors of high-temperature wire on hand with these assortments.
With a slim PFA plastic insulation, this wire has the same heat resistance as standard high-temperature wire but its diameter is one-third the size for use in tight spaces.
Use this wire in high-voltage applications that require 10,000 volts DC or greater, such as in high-power signs and lasers.
Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.
The shielding in this wire blocks signal interference from nearby equipment and devices. When pulled lengthwise, it extends 40% and then returns to its original length, so it's useful for high-vibration applications.
When pulled lengthwise, this unshielded wire extends 40% and then returns to its original length, so it's useful for high-vibration applications.
Eliminate tangles—the slippery insulation on this wire won't catch on itself, other wires, or on rough surfaces.
Connect batteries in vehicles and generators.
Originally designed to meet the quality standards of the auto industry, this wire withstands high temperatures, flames, and abrasion.
Keep spools of vehicle wire in multiple colors on hand.
Connect batteries in generators, forklifts, and other vehicles in corrosive environments. Also known as marine wire, this copper wire is tin plated to resist corrosion from salt water, battery acid, and oil.
Often found in older vehicles, this fusible link wire protects a circuit in applications where you can’t use a standard fuse.
Install this copper wire in conduit and cable trays throughout commercial and industrial buildings. It's also known as branch circuit wire.
The thin strands in this wire have better fatigue resistance under repeated flexing than the strands in standard continuous-flex wire, so it will last longer.
Often used in automated applications such as robotics, this wire withstands continuous motion without degrading data or signal transmission.
Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.
Insulated with TPE, this wire won’t break down from oil, coolant, or chemicals, and it carries a strong signal even when repeatedly bent. This makes it great for greasy equipment on automated lines, such as lubricated cable carriers.
The EPDM insulation on this wire won’t become brittle or crack from sunlight, humidity, rain, temperature changes, abrasion from dirt and debris, and other rough outdoor conditions.
Also known as photovoltaic (PV) wire, this wire won’t deteriorate from UV light when used outdoors. It’s often used in solar panels.
Make connections in circuit boards with these short lengths of terminated wire.
Assortments include wire in multiple lengths and colors.
Mend or extend aluminum wire often found in older buildings.
Connect equipment and devices to a power supply.
Designed for indoor applications, these cords are often used to power appliances.
Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.
These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.
All cords have a country-specific plug to power equipment from international outlets.
After a power failure, these cords must be manually reset, preventing unexpected equipment startup.
Hardwire these cords to equipment.
Save preparation time—these cords are ready-to-use with ring terminals on each end of a single-conductor wire.
Ready to install in panel boxes, switches, outlets, and other devices, these cords come with a spade terminal already attached to one end.
Ground your electrical system.
Make custom RTD probes.
Make your own thermocouples.
Extend the reach of your thermocouple probe—plug-in connectors on both ends of this wire speed up installation.
Designed to carry thermocouple signals over longer distances than standard thermocouple wire, this extension wire lengthens existing thermocouple connections.
With plug-in connectors on both ends, this wire extends the reach of your thermocouple. It’s protected by a stainless steel armor that also resists corrosion and wear.
Prevent static charge buildup while securely connecting duct hose with a wire spiral.
Thicker wires allow for a fast start on large trucks and industrial vehicles.
These cables are for occasional use on cars and other small transport vehicles.