After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.

For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.

Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.

Often used in mining equipment, submersible pumps, and drilling rigs, this cable withstands 2,000 volts AC/DC.

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

Supply power to submersible pumps in water or oil wells.

The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission

A thick outer layer of silicone rubber insulation protects this cable from high voltages while remaining ultra flexible. It stands up to continuous motion without degrading data or signal transmission.

With a life span of more than 20 million high-speed flex cycles, this cable lasts twice as long as standard continuous-flex cable. The frequent motion will not degrade data or signal transmission.

Bend and flex this silicone-insulated cable in temperatures up to 350° F. It can keep moving in areas twice as hot as most other continuous-flex cables without degrading data or signal transmission.

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.

Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.

Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.

Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with low-current circuits such as microphones and headsets.

Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.

This cable has an uninsulated ground wire that touches the protective metal armor so it can be used for bonding and grounding. It's often used along the exterior of walls to carry power to outlet boxes. Also known as AC cable.

Prevent damage to wires for fire alarm systems, smoke detectors, and other critical circuits with this armored cable.

This cable is approved for use in vertical shafts and large facilities with mulitple levels for critical circuits such as fire alarms and smoke detectors.

Approved for flame resistance, this cable meets Mine Safety and Health Administration (MSHA) standards. The insulation resists abrasion and chemicals.

This wire meets stringent military specifications for material quality.

Maintain a supply of Mil. Spec. wire in multiple colors.

Run power over rough surfaces—this wire has thick insulation that stands up to wear and tear.

The PEEK insulation on this wire won't degrade when exposed to radiation, and is often used in nuclear energy production.

Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.

Use this wire in high-voltage applications that require 10,000 volts DC or greater, such as in high-power signs and lasers.

When pulled lengthwise, this unshielded wire extends 40% and then returns to its original length, so it's useful for high-vibration applications.

Originally designed to meet the quality standards of the auto industry, this wire withstands high temperatures, flames, and abrasion.

Connect batteries in generators, forklifts, and other vehicles in corrosive environments. Also known as marine wire, this copper wire is tin plated to resist corrosion from salt water, battery acid, and oil.

Also known as photovoltaic (PV) wire, this wire won’t deteriorate from UV light when used outdoors. It’s often used in solar panels.

Often used in automated applications such as robotics, this wire withstands continuous motion without degrading data or signal transmission.

Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.

Make connections in circuit boards with these short lengths of terminated wire.

Keep multiple colors of wrap wire on hand to color code connections in circuit boards for easy identification.

Adapt your USB port to connect to a variety of other devices.

With a flange on the socket end, you can mount these cords in a panel cutout to move data between computers, printers, and mobile devices.

Use these unshielded cords where signal interference is not a concern.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs).

Also known as plenum-rated cords, these CMP ethernet cords have flame-resistant, low-smoke insulation and can be used without conduit in duct work and above a drop ceiling.

FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.

Step on or roll carts and platform trucks over these M12 cords without crushing them.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Connect two devices to a distribution block or I/O module with just one cord. Often used with sensors and actuators, these splitters send power/signals to your devices through a single connection.

Send data between sensors and receivers that have different signal types. These cords change the output signal from PNP to NPN.

Often used for automated systems, motors, and pumps in tough industrial areas such as near welding and metal machining, these cords carry higher current than M5, M8, and M12 cords.

All cords have a country-specific plug on one end and an IEC socket on the other end.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Power multiple devices from one power source.

Tug these cords to full length, and they’ll stay plugged in. Also called hospital-grade cords, they form an extra-tight connection with outlets. After stretching, they return to a tight, tangle-free coil.