Clevis-to-Clevis Swivels—Not for Lifting
For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.
Hot-dipped galvanized steel swivels have a thick coating for corrosion resistance.
316 stainless steel swivels have excellent resistance to salt water and chemicals. They’re more corrosion resistant than hot-dipped galvanized steel swivels.
For technical drawings and 3-D models, click on a part number.
Clevis | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Inside Wd. | Inside Lg. | Pin Dia. | Capacity, lbs. | Fabrication | Each | |
Hot-Dipped Galvanized Steel | |||||||
| 1 7/8" | 3/8" | 3/8" | 3/16" | 450 | Forged | 00000000 | 000000 |
| 1 15/16" | 1/2" | 1/2" | 1/4" | 750 | Forged | 00000000 | 00000 |
| 2 11/16" | 11/16" | 11/16" | 5/16" | 1,200 | Forged | 00000000 | 00000 |
| 3 3/8" | 3/4" | 1" | 3/8" | 2,000 | Forged | 00000000 | 00000 |
| 4 15/32" | 1" | 1 1/4" | 1/2" | 3,500 | Forged | 00000000 | 00000 |
| 5 11/32" | 1 1/4" | 1 1/2" | 5/8" | 5,000 | Forged | 00000000 | 00000 |
| 6 1/2" | 1 5/8" | 1 3/4" | 3/4" | 7,000 | Forged | 00000000 | 000000 |
316 Stainless Steel | |||||||
| 1 5/8" | 7/16" | 3/8" | 3/16" | 300 | Cast | 00000000 | 0000 |
| 1 7/8" | 1/2" | 7/16" | 1/4" | 600 | Cast | 00000000 | 00000 |
| 2 17/32" | 5/8" | 5/8" | 5/16" | 1,100 | Cast | 00000000 | 00000 |
| 3 3/16" | 3/4" | 13/16" | 3/8" | 1,500 | Cast | 00000000 | 00000 |
| 4 5/16" | 1" | 15/16" | 1/2" | 2,600 | Cast | 00000000 | 00000 |
| 5 7/16" | 1 1/4" | 1 3/8" | 5/8" | 4,700 | Cast | 00000000 | 000000 |
| 6 7/32" | 1 1/2" | 1 1/2" | 3/4" | 7,100 | Cast | 00000000 | 000000 |
Eye-to-Eye Swivels—Not for Lifting
Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.
Galvanized steel swivels have a thick coating for corrosion resistance.
316 stainless steel swivels have excellent resistance to salt water and chemicals.
Eye | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Thick. | Inside Length (A) | Inside Length (B) | ID | Capacity, lbs. | Fabrication | Specifications Met | Each | |
Galvanized Steel | |||||||||
| 3" | 1/4" | 3/4" | 1" | 3/4" | 800 | Forged | __ | 00000000 | 000000 |
| 3 5/8" | 5/16" | 3/4" | 1 1/4" | 1" | 1,200 | Forged | Fed. Spec. RR-C-271G | 0000000 | 00000 |
| 4 5/16" | 3/8" | 7/8" | 1 1/2" | 1 1/4" | 2,200 | Forged | Fed. Spec. RR-C-271D | 0000000 | 00000 |
| 5 3/8" | 1/2" | 1 3/16" | 2" | 1 1/2" | 3,600 | Forged | Fed. Spec. RR-C-271D | 0000000 | 00000 |
| 6 5/8" | 5/8" | 1 1/2" | 2 3/8" | 1 3/4" | 5,200 | Forged | Fed. Spec. RR-C-271D | 0000000 | 00000 |
| 7 3/8" | 3/4" | 1 5/8" | 2 5/8" | 2" | 7,000 | Forged | Fed. Spec. RR-C-271D | 0000000 | 000000 |
316 Stainless Steel | |||||||||
| 1 5/8" | 3/16" | 9/16" | 9/16" | 1/2" | 300 | Cast | __ | 0000000 | 00000 |
| 2 1/8" | 1/4" | 5/8" | 5/8" | 9/16" | 600 | Cast | __ | 0000000 | 00000 |
| 2 15/16" | 5/16" | 7/8" | 7/8" | 3/4" | 1,000 | Cast | __ | 0000000 | 00000 |
| 3 3/4" | 3/8" | 7/8" | 7/8" | 15/16" | 1,900 | Cast | __ | 0000000 | 00000 |
| 4 15/16" | 1/2" | 1 3/8" | 1 3/8" | 1 5/16" | 2,700 | Cast | __ | 0000000 | 00000 |
| 6 1/16" | 5/8" | 1 3/4" | 1 3/4" | 1 1/2" | 4,600 | Cast | __ | 0000000 | 00000 |
Eye-to-Clevis Swivels—Not for Lifting
These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.
Galvanized steel swivels have a thick coating for corrosion resistance.
316 stainless steel swivels have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Eye | Clevis | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Thick. | Inside Lg. | ID | Inside Wd. | Inside Lg. | Pin Dia. | Pin Type | Capacity, lbs. | Fabrication | Specifications Met | Each | |
Galvanized Steel | ||||||||||||
| 2 7/8" | 5/16" | 3/4" | 1" | 1/2" | 13/16" | 5/16" | Cotter | 1,200 | Forged | Fed. Spec. RR-C-271G | 0000000 | 000000 |
| 3 1/2" | 3/8" | 7/8" | 1 1/4" | 5/8" | 1 1/16" | 3/8" | Cotter | 2,200 | Forged | Fed. Spec. RR-C-271G | 0000000 | 00000 |
| 4 9/16" | 1/2" | 1 1/4" | 1 1/2" | 7/8" | 1 7/16" | 1/2" | Cotter | 3,600 | Forged | Fed. Spec. RR-C-271G | 0000000 | 00000 |
| 5 1/2" | 5/8" | 1 9/16" | 1 3/4" | 1" | 1 1/2" | 5/8" | Cotter | 5,200 | Forged | Fed. Spec. RR-C-271G | 0000000 | 00000 |
| 6" | 3/4" | 1 3/4" | 2" | 1 1/8" | 1 3/4" | 3/4" | Cotter | 7,000 | Forged | Fed. Spec. RR-C-271G | 0000000 | 000000 |
316 Stainless Steel | ||||||||||||
| 2" | 1/4" | 9/16" | 5/8" | 1/2" | 7/16" | 7/32" | Screw | 600 | Cast | __ | 00000000 | 00000 |
| 2 11/16" | 5/16" | 13/16" | 13/16" | 23/32" | 5/8" | 5/16" | Screw | 1,000 | Cast | __ | 00000000 | 00000 |
| 3 5/8" | 3/8" | 1 1/16" | 15/16" | 13/16" | 15/16" | 3/8" | Screw | 1,900 | Cast | __ | 00000000 | 00000 |
| 4 5/8" | 1/2" | 1 3/8" | 1 3/16" | 15/16" | 1 1/8" | 1/2" | Screw | 2,700 | Cast | __ | 00000000 | 00000 |
| 5 3/4" | 5/8" | 1 3/4" | 1 1/2" | 1 1/4" | 1 1/2" | 5/8" | Screw | 4,600 | Cast | __ | 00000000 | 00000 |
| 6 13/16" | 3/4" | 2" | 1 5/8" | 1 23/32" | 1 11/16" | 25/32" | Screw | 5,500 | Cast | __ | 00000000 | 000000 |
Split Ring-to-Split Ring Miniature Ball Bearing Swivels—Not for Lifting
These have split rings that swing freely and pull from the center for easy alignment. They have good resistance to salt water and chemicals.
Eye-to-Eye Ball Bearing Swivels—Not for Lifting
Adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris. They have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Eye | |||||
|---|---|---|---|---|---|
| Lg. | ID | Thick. | Capacity, lbs. | Each | |
316 Stainless Steel  | |||||
| 2 1/4" | 5/16" | 1/4" | 1,100 | 0000000 | 000000 |
Clevis-to-Clevis Ball Bearing Swivels—Not for Lifting
Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load. The bearings are permanently lubricated and sealed to keep out debris. They have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Eye-to-Clevis Ball Bearing Swivels—Not for Lifting
Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris. They have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Eye | Clevis | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | ID | Thick. | Inside Wd. | Pin Dia. | Capacity, lbs. | Each | |
316 Stainless Steel | |||||||
| 1 13/16" | 5/16" | 1/4" | 3/8" | 1/4" | 1,800 | 0000000 | 000000 |
Split Ring-to-Snap Miniature Ball Bearing Swivels—Not for Lifting
The snap and split ring swing freely and pull from the center for easy alignment. They have good resistance to salt water and chemicals.
| Lg. | Ring ID | Snap Inside Wd. | Capacity, lbs. | Bearing Material | Each | |
Nickel-Plated Brass | ||||||
|---|---|---|---|---|---|---|
| 1" | 1/8" | 1/8" | 10 | 18-8 Stainless Steel | 000000 | 00000 |
| 1 5/16" | 3/16" | 1/4" | 10 | 18-8 Stainless Steel | 000000 | 0000 |
| 1 9/16" | 1/4" | 1/4" | 30 | 18-8 Stainless Steel | 000000 | 0000 |
| 2" | 1/4" | 5/16" | 50 | 18-8 Stainless Steel | 000000 | 0000 |
| 2 5/16" | 5/16" | 7/16" | 70 | 18-8 Stainless Steel | 0000000 | 0000 |
Clevis-to-Clevis Ball Bearing Swivels—For Lifting
You can use these in critical applications to adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris.
Note: Swivels are for vertical lifting only.
316 stainless steel swivels have excellent resistance to salt water and chemicals.
For technical drawings and 3-D models, click on a part number.
Clevis | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Inside Wd. | Inside Lg. | Pin Dia. | Capacity, lbs. | Specifications Met | Each | |
Alloy Steel | |||||||
| 3 11/32" | 5/16" | 15/32" | 5/16" | 1,000 | ASME B30.26 | 000000000 | 0000000 |
| 4 3/4" | 19/32" | 11/16" | 3/8" | 1,500 | ASME B30.26 | 000000000 | 000000 |
| 5 9/16" | 19/32" | 13/16" | 7/16" | 3,000 | ASME B30.26 | 000000000 | 000000 |
| 7 5/32" | 3/4" | 15/16" | 5/8" | 6,000 | ASME B30.26 | 000000000 | 000000 |
| 10 1/2" | 1" | 1 9/16" | 7/8" | 10,000 | ASME B30.26 | 000000000 | 000000 |
316 Stainless Steel | |||||||
| 4 15/16" | 19/32" | 11/16" | 3/8" | 1,500 | ASME B30.26 | 000000000 | 000000 |
| 5 29/32" | 19/32" | 13/16" | 7/16" | 3,000 | ASME B30.26 | 000000000 | 000000 |
| 7 1/2" | 3/4" | 15/16" | 5/8" | 6,000 | ASME B30.26 | 000000000 | 000000 |
| 11" | 1" | 1 9/16" | 7/8" | 10,000 | ASME B30.26 | 000000000 | 000000 |
Eye-to-Clevis Ball Bearing Swivels—For Lifting
Adjust the position of a fitting or an object under load and minimize twisting and knotting in critical applications. The bearings are permanently lubricated and sealed to keep out debris.
Note: Swivels are for vertical lifting only.
For technical drawings and 3-D models, click on a part number.
Eye | Clevis | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | ID | Thick. | Inside Wd. | Inside Lg. | Pin Dia. | Capacity, lbs. | Specifications Met | Each | |
Alloy Steel | |||||||||
| 3 1/8" | 1/4" | 1/4" | 5/16" | 3/8" | 5/16" | 1,000 | ASME B30.26 | 0000000 | 0000000 |
| 4 9/16" | 3/8" | 5/16" | 3/8" | 1/2" | 3/8" | 1,500 | ASME B30.26 | 0000000 | 000000 |
| 5 9/16" | 5/8" | 1/2" | 7/16" | 23/32" | 7/16" | 3,000 | ASME B30.26 | 0000000 | 000000 |
| 7 1/8" | 7/8" | 3/4" | 3/4" | 15/16" | 5/8" | 6,000 | ASME B30.26 | 0000000 | 000000 |
| 10 1/2" | 1 1/4" | 1" | 1" | 1 5/16" | 7/8" | 10,000 | ASME B30.26 | 0000000 | 000000 |
Eye-to-Eye Ball Bearing Swivels—For Lifting
Use in critical applications to adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris.
Note: Swivels are for vertical lifting only.
For technical drawings and 3-D models, click on a part number.