Plastic Submersible Cord Grips
Able to resist most chemicals and withstand use underwater, these nylon grips are rated IP68 for protection from dusty environments and prolonged submersion. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. All are CE marked and TUV Rheinland certified, which means they meet European safety standards. Grips with UL certifications meet American safety standards, while those with C-UL and CSA certifications meet Canadian safety standards. Some also meet standards for marine vessels classed by DNV-GL.
Grips with metric threads meet IP69 for protection from high-pressure washdowns.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Cord OD | For Knockout Trade Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | 1-9 | 10-Up | |
Metric Threads  | ||||||||
| 0.13"-0.27" | M16 | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 6, NEMA 12, IP66, IP68, IP69 | UL Recognized Component, C-UL Recognized Component, CE Marked, DNV-GL Type Approved, TUV Rheinland Certified, VDE Certified | 0000000 | 00000 | 00000 |
| 0.16"-0.39" | M16 | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP66, IP68, IP69 | UL Recognized Component, C-UL Recognized Component, CSA Certified, CE Marked, DNV-GL Type Approved, TUV Rheinland Certified, VDE Certified | 0000000 | 0000 | 0000 |
High-Temperature Plastic Submersible Cord Grips
Made of PVDF, these grips are able to withstand temperatures up to 300° F and are corrosion- and chemical-resistant. Grips are rated NEMA 12 for protection from splashing oil and coolant as well as IP68 and NEMA 6 for protection from continuous submersion. They’re also rated IP69K and NEMA 4X, which means in addition to being submersible, they withstand high-pressure, high-temperature washdowns and can be dunked in corrosive liquids without any affect. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | |||||||
|---|---|---|---|---|---|---|---|
| 0.08"-0.24" | M16 | -30° to 300° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Recognized Component, CSA Certified, UL 94 V-0 | 0000000 | 000000 |
| 0.16"-0.31" | M16 | -30° to 300° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Recognized Component, CSA Certified, UL 94 V-0 | 0000000 | 00000 |
Continuous-Flex Plastic Submersible Cord Grips
These grips have an extension that provides extra support for moving cables and prevents kinking for longer cable life. Grips are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Thread Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.08"-0.24" | M16 | M16 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K | UL Recognized Component, UL 94 V-0, UL 746C f1, CSA Certified | 00000000 | 00000 |
| 0.16"-0.31" | M16 | M16 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K | UL Recognized Component, UL 94 V-0, UL 746C f1, CSA Certified | 00000000 | 0000 |
| 0.2"-0.39" | M16 | M16 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K | UL Recognized Component, UL 94 V-0, UL 746C f1, CSA Certified | 00000000 | 0000 |
90° Elbow Continuous-Flex Plastic Submersible Cord Grips
These grips have an extension that provides extra support for moving cables and prevents kinking for longer cable life. Grips are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Thread Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.08"-0.24" | M16 | M16 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 12, NEMA 4X, NEMA 6 | CSA Certified, UL 746C f1, UL 94 V-0, UL Recognized Component | 0000000 | 000000 |
| 0.16"-0.31" | M16 | M16 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 12, NEMA 4X, NEMA 6 | CSA Certified, UL 746C f1, UL 94 V-0, UL Recognized Component | 0000000 | 00000 |
Vented Plastic Submersible Cord Grips
Vent air from your enclosure to equalize pressure and stop condensation from forming inside while securing cords in wet environments. These polyamide grips are lightweight and resist rusting. Because they’re IP rated, you can safely submerse them for brief periods of time. They also seal out water from washdowns and dust. All relieve strain on your cord if it’s pulled, prolonging its life.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Thread Size | Material | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.16"-0.31" | M16 | M16 | Black Polyamide Plastic | 0° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP66, IP67 | CSA Certified, CE Marked, CSA-US Certified, C-UL Recognized Component, DNV-GL Type Approved, UL Recognized Component, VDE Certified | 00000000 | 000000 |
90° Elbow Plastic Submersible Cord Grips
Able to resist most chemicals and withstand use underwater, these nylon grips are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. All meet UL 746C f1, so they’re UV resistant and can be used in direct sunlight, as well as UL 94 V-0, which means they’ll self-extinguish within 10 seconds of catching fire and won’t spread flames by dripping. UL listed and CSA certified, they meet U.S. and Canadian safety standards.
Metric Threads are also VDE certified, meaning they meet European safety standards.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.08"-0.24" | M16 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Listed, UL 94 V-0, UL 746C f1, CSA Certified, VDE Certified | 0000000 | 000000 |
| 0.16"-0.31" | M16 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Listed, UL 94 V-0, UL 746C f1, CSA Certified, VDE Certified | 0000000 | 00000 |
Flared Plastic Submersible Cord Grips
Secure cords installed through enclosures and panels in wet environments while protecting them against sharp bends. With a flared end that keeps cords from bending without limiting too much motion, these grips extend cord life. They’re good for cords used on handheld equipment. Made of polyamide, they stand up to corrosion and wear.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Flare Diameter | Material | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.13"-0.31" | M16 | 15/16" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Recognized Component, C-UL Recognized Component, CE Marked | 0000000 | 00000 |
Screw-Down Sure-Grip Plastic Submersible Cord Grips
Tighten the screw-down clamp on these grips for superior pull-out resistance while relieving tension at connection points. Grips are rated IP68 for protection from prolonged submersion and IP69K for protection against high-pressure, high-temperature jets of water. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.16"-0.31" | M16 | Black Nylon Plastic | 0° to 155° | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6 | UL 94 V-0, CE Marked, DNV-GL Type Approved | 0000000 | 000000 |
Brass Submersible Cord Grips
Suitable for use in applications where cords are underwater—these grips are rated IP68 for protection from prolonged submersion. They are nickel plated for good corrosion resistance. A rubber bushing and O-ring create a tight seal to prevent liquid from entering your connection.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Thread Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.18"-0.39" | M16 | M16 | 0° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP68, NEMA 4X, NEMA 6, NEMA 12 | CE Marked, DNV-GL Type Approved, VDE Certified | 0000000 | 00000 |
Low-Temperature Brass Submersible Cord Grips
Keep cords from coming loose and seal water out of enclosures in extremely cold labs and storage areas. Thanks to their plastic bushing and rubber O-ring, these grips withstand temperatures as low as -75° F. They’re NEMA and IP rated, so you can safely submerse them under water, though only for short periods of time. They also stand up to dust, weather, washdowns, and oil. Nickel plated, they resist corrosion. All of these grips relieve strain on your cord if it’s pulled, prolonging its life.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | |||||||
|---|---|---|---|---|---|---|---|
| 0.08"-0.27" | M16 | -75° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68 | CE Marked, UL Recognized Component, VDE Certified | 0000000 | 000000 |
| 0.18"-0.39" | M16 | -75° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68 | CE Marked, UL Recognized Component, VDE Certified | 0000000 | 00000 |
Vented Brass Submersible Cord Grips
Secure cable installed through enclosures in wet environments while venting air to protect electronics from condensation. Vents on these cord grips equalize pressure between the inside and outside of an enclosure, preventing harmful moisture from forming. They are nickel-plated brass, so they resist corrosion. These cord grips are rated IP66 and IP67 for protection from dust, washdown, and temporary submersion.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Thread Size | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.16"-0.31" | M16 | M16 | 0° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP66, IP67 | CSA Certified, CE Marked, CSA-US Certified, C-UL Recognized Component, DNV-GL Type Approved, UL Recognized Component, VDE Certified | 0000000 | 000000 |
| 0.2"-0.39" | M16 | M16 | 0° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP66, IP67 | CSA Certified, CE Marked, CSA-US Certified, C-UL Recognized Component, DNV-GL Type Approved, UL Recognized Component, VDE Certified | 0000000 | 00000 |
Stainless Steel Submersible Cord Grips
These stainless steel grips offer the most corrosion resistance of any of our submersible metal cord grips. Grips are rated IP68 for protection from prolonged submersion and IP69K for protection from high-pressure, high-temperature jets of water. A rubber bushing and O-ring create a tight seal to prevent liquid from entering your connection.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | |||||||
|---|---|---|---|---|---|---|---|
| 0.12"-0.28" | M16 | -20° to 210° | Rubber O-Ring, Nickel-Plated Brass Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | CE Marked, CSA Certified, UL Recognized Component | 0000000 | 000000 |
| 0.2"-0.39" | M16 | -20° to 210° | Rubber O-Ring, Nickel-Plated Brass Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | CE Marked, CSA Certified, UL Recognized Component | 0000000 | 00000 |
Aluminum Cord Grips
These cord grips are lightweight yet durable. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.
Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. When used together with the cord grips, they meet NEMA 4X, NEMA 13, and IP66 ratings, so they can be used indoors and outdoors to protect against corrosion, dust, spraying water, oil, and coolant. Each kit includes two locknuts and one or two O-rings.
For technical drawings and 3-D models, click on a part number.