Button Pins for Telescoping Tubing
These pins use spring force to hold pieces of telescoping tubing together. Install them in the smaller tube, then slip the larger tube over the smaller tube until the button pops into a hole. Also known as snap buttons and tubing buttons.
Zinc-plated steel pins offer good strength and some corrosion resistance.
410 stainless steel pins resist wear as well as corrosion. They are magnetic.
301 stainless steel pins are the most corrosion resistant. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Button | Leg | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Round Tubing ID | For Square Tubing Inside Wd. | Dia. | Ht. | Wd. | Lg. | Min. Hardness | Pkg. Qty. | Pkg. | |
Zinc-Plated 1050 Spring Steel | |||||||||
Single Button Straight Leg | |||||||||
| 3/8"-5/8" | 5/16"-5/8" | 1/8" | 3/16" | 3/16" | 1 1/4" | Rockwell C44 | 10 | 000000000 | 000000 |
| 1/2"-7/8" | 7/16"-7/8" | 1/4" | 1/4" | 3/8" | 1 7/16" | Rockwell C44 | 10 | 000000000 | 0000 |
| 1/2"-1 1/4" | 7/16"-1 1/4" | 1/4" | 3/8" | 3/8" | 1 7/8" | Rockwell C44 | 10 | 000000000 | 0000 |
| 9/16"-1 1/4" | 7/16"-1 1/4" | 5/16" | 3/8" | 7/16" | 1 7/8" | Rockwell C44 | 5 | 000000000 | 0000 |
| 5/8"-1 1/4" | 7/16"-1 1/4" | 5/16" | 3/8" | 7/16" | 1 15/16" | Rockwell C44 | 10 | 000000000 | 0000 |
| 11/16"-1 3/8" | 1/2"-1 3/8" | 3/8" | 3/8" | 1/2" | 2 1/8" | Rockwell C44 | 5 | 000000000 | 0000 |
| 11/16"-1 3/8" | 1/2"-1 3/8" | 3/8" | 3/8" | 1/2" | 2 3/16" | Rockwell C44 | 1 | 000000000 | 0000 |
| 11/16"-1 3/8" | 9/16"-1 3/8" | 3/8" | 3/8" | 1/2" | 2 1/8" | Rockwell C44 | 10 | 000000000 | 0000 |
| 1 1/4"-1 3/4" | 1 1/8"-1 3/4" | 3/8" | 3/8" | 1/2" | 3 1/2" | Rockwell C44 | 1 | 000000000 | 0000 |
Single Button Dog Leg | |||||||||
| 1/2"-3/4" | 3/8"-3/4" | 1/4" | 1/4" | 3/8" | 1 3/8" | Rockwell C44 | 10 | 000000000 | 0000 |
| 1/2"-1" | 7/16"-1" | 5/16" | 3/8" | 7/16" | 1 7/8" | Rockwell C44 | 5 | 000000000 | 0000 |
| 9/16"-1" | 7/16"-1" | 5/16" | 3/8" | 7/16" | 1 7/8" | Rockwell C44 | 10 | 000000000 | 0000 |
| 9/16"-1" | 9/16"-1" | 1/4" | 3/8" | 3/8" | 1 7/8" | Rockwell C44 | 10 | 000000000 | 0000 |
| 9/16"-1 1/8" | 1/2"-1 1/8" | 3/8" | 7/16" | 1/2" | 2 1/16" | Rockwell C44 | 1 | 000000000 | 0000 |
| 5/8"-1 1/8" | 9/16"-1 1/8" | 3/8" | 3/8" | 1/2" | 1 13/16" | Rockwell C44 | 10 | 000000000 | 0000 |
Double Button Straight Leg—Opposite Side | |||||||||
| 5/8"-7/8" | 5/8"-7/8" | 1/4" | 1/4", 1/4" | 3/8" | 1 1/2" | Rockwell C44 | 5 | 000000000 | 0000 |
| 7/8"-1 1/8" | 7/8"-1 1/8" | 5/16" | 3/8", 3/8" | 7/16" | 2 1/16" | Rockwell C44 | 5 | 000000000 | 0000 |
| 7/8"-1 7/8" | 7/8"-1 7/8" | 3/8" | 3/8", 3/8" | 1/2" | 3 3/16" | Rockwell C44 | 1 | 000000000 | 0000 |
| 1"-1 7/8" | 1"-1 7/8" | 3/8" | 7/16", 7/16" | 1/2" | 2 13/16" | Rockwell C44 | 5 | 000000000 | 00000 |
| 1"-1 7/8" | 1"-1 7/8" | 3/8" | 7/16", 7/16" | 1/2" | 3 1/8" | Rockwell C44 | 1 | 000000000 | 0000 |
Double Button Straight Leg—Same Side | |||||||||
| 1/2"-1" | 1/2"-1" | 5/16" | 2 3/8", 1 3/8" | 7/16" | 3" | Rockwell C44 | 1 | 000000000 | 0000 |
410 Stainless Steel  | |||||||||
Single Button Straight Leg | |||||||||
| 3/8"-5/8" | 5/16"-5/8" | 1/8" | 3/16" | 3/16" | 1 1/4" | Rockwell C42 | 5 | 000000000 | 0000 |
| 1/2"-7/8" | 7/16"-7/8" | 1/4" | 1/4" | 3/8" | 1 7/16" | Rockwell C42 | 5 | 000000000 | 00000 |
| 1/2"-1 1/4" | 7/16"-1 1/4" | 1/4" | 3/8" | 3/8" | 1 7/8" | Rockwell C42 | 5 | 000000000 | 00000 |
| 5/8"-1 1/4" | 7/16"-1 1/4" | 5/16" | 3/8" | 7/16" | 1 15/16" | Rockwell C42 | 5 | 000000000 | 00000 |
| 11/16"-1 3/8" | 9/16"-1 3/8" | 3/8" | 3/8" | 1/2" | 2 1/8" | Rockwell C42 | 1 | 000000000 | 0000 |
Single Button Dog Leg | |||||||||
| 9/16"-1" | 7/16"-1" | 5/16" | 3/8" | 7/16" | 1 7/8" | Rockwell C42 | 5 | 000000000 | 00000 |
| 9/16"-1" | 9/16"-1" | 1/4" | 3/8" | 3/8" | 1 7/8" | Rockwell C42 | 5 | 000000000 | 00000 |
| 5/8"-1 1/8" | 9/16"-1 1/8" | 3/8" | 3/8" | 1/2" | 2 1/16" | Rockwell C42 | 1 | 000000000 | 0000 |
Double Button Straight Leg—Opposite Side | |||||||||
| 5/8"-7/8" | 5/8"-7/8" | 1/4" | 1/4", 1/4" | 3/8" | 1 1/2" | Rockwell C42 | 5 | 000000000 | 00000 |
| 7/8"-1 1/8" | 7/8"-1 1/8" | 5/16" | 3/8", 3/8" | 7/16" | 2 1/16" | Rockwell C42 | 1 | 000000000 | 0000 |
| 1"-1 7/8" | 1"-1 7/8" | 3/8" | 7/16", 7/16" | 1/2" | 2 13/16" | Rockwell C42 | 1 | 000000000 | 0000 |
Zinc-Plated 410 Stainless Steel | |||||||||
Single Button Dog Leg | |||||||||
| 1/2"-3/4" | 3/8"-3/4" | 1/4" | 1/4" | 3/8" | 1 3/8" | Rockwell C42 | 5 | 000000000 | 00000 |
301 Stainless Steel | |||||||||
Single Button Straight Leg | |||||||||
| 7/16"-7/8" | 3/8"-7/8" | 1/4" | 1/4" | 1/4" | 1 7/16" | Rockwell C41 | 1 | 000000000 | 0000 |
| 9/16"-1 1/8" | 1/2"-7/8" | 3/8" | 3/8" | 3/8" | 2 1/8" | Rockwell C41 | 1 | 000000000 | 0000 |
Complete Fabric Snaps
18-8 stainless steel snaps have good corrosion resistance and may be mildly magnetic.
Brass snaps are rust resistant, electrically conductive, and nonmagnetic. The nickel-plated finish is more corrosion-resistant than the black-oxide finish.
For technical drawings and 3-D models, click on a part number.
| Snap Dia. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||
|---|---|---|---|
| 9/16" | 10 | 000000000 | 000000 |
| 9/16" | 100 | 000000000 | 00000 |
Black-Oxide Brass | |||
| 1/2" | 10 | 000000000 | 0000 |
| 1/2" | 100 | 000000000 | 00000 |
| 9/16" | 10 | 000000000 | 00000 |
| 9/16" | 100 | 000000000 | 00000 |
Nickel-Plated Brass | |||
| 1/2" | 10 | 000000000 | 0000 |
| 1/2" | 100 | 000000000 | 00000 |
| 9/16" | 6 | 000000000 | 0000 |
| 9/16" | 10 | 000000000 | 0000 |
| 9/16" | 100 | 000000000 | 00000 |
Nickel-Plated Steel | |||
| 9/16" | 10 | 000000000 | 0000 |
| 9/16" | 100 | 000000000 | 00000 |
Complete Fabric Snap Kits
Kits include a hand punch tool with die and six complete snaps.
For technical drawings and 3-D models, click on a part number.
Male Fabric Snap Halves
Pair these male snap halves with standard female snap halves or female/male dual-sided snap halves (sold separately) to make a complete snap.
18-8 stainless steel snap halves have good corrosion resistance and may be mildly magnetic. Brass snap halves are rust resistant, electrically conductive, and nonmagnetic. The nickel-plated finish is more corrosion-resistant than the black-oxide finish.
For technical drawings and 3-D models, click on a part number.
| Snap Dia. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||
|---|---|---|---|
| 9/16" | 10 | 000000000 | 00000 |
| 9/16" | 100 | 000000000 | 00000 |
Black-Oxide Brass | |||
| 9/16" | 10 | 000000000 | 0000 |
| 9/16" | 100 | 000000000 | 00000 |
Nickel-Plated Brass | |||
| 9/16" | 10 | 000000000 | 0000 |
| 9/16" | 100 | 000000000 | 00000 |
| 18-8 Stainless Steel Female Snap Halves (Pkg. of 100) | 000000000 | Pkg. | 000000 |
| Black-Oxide Brass Female Snap Halves (Pkg. of 100) | 000000000 | Pkg. | 00000 |
| 18-8 Stainless Steel Female Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |
| Black-Oxide Brass Female Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |
| Nickel-Plated Brass Female Snap Halves (Pkg. of 100) | 000000000 | Pkg. | 00000 |
| Nickel-Plated Brass Female/Male Dual-Sided Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |
| Nickel-Plated Brass Female Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |
Female Fabric Snap Halves
These female snap halves create the finished button-look of a snap. Pair them with standard male snap halves or male/male dual-sided snap halves (sold separately) to create a complete snap.
18-8 stainless steel snap halves have good corrosion resistance and may be mildly magnetic. Brass snap halves are rust resistant, electrically conductive, and nonmagnetic. The nickel-plated finish is more corrosion-resistant than the black-oxide finish.
For technical drawings and 3-D models, click on a part number.
| Snap Dia. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||
|---|---|---|---|
| 9/16" | 10 | 000000000 | 00000 |
| 9/16" | 100 | 000000000 | 00000 |
Black-Oxide Brass | |||
| 9/16" | 10 | 000000000 | 0000 |
| 9/16" | 100 | 000000000 | 00000 |
Nickel-Plated Brass | |||
| 9/16" | 10 | 000000000 | 0000 |
| 9/16" | 100 | 000000000 | 00000 |
| Nickel-Plated Brass Male Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 00000 |
| Black-Oxide Brass Male Snap Halves (Pkg. of 100) | 000000000 | Pkg. | 00000 |
| 18-8 Stainless Steel Male Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |
| 18-8 Stainless Steel Male Snap Halves (Pkg. of 100) | 000000000 | Pkg. | 00000 |
| Nickel-Plated Brass Male/Male Dual-Sided Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |
| Nickel-Plated Brass Male Snap Halves (Pkg. of 100) | 000000000 | Pkg. | 00000 |
| Black-Oxide Brass Male Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |
Female/Male Dual-Sided Fabric Snap Halves
Once installed, these fasteners provide a female snap half on one side of your fabric and a male snap half on the other, which allows you to fasten multiple layers of fabric together.
For technical drawings and 3-D models, click on a part number.
| Snap Dia. | Pkg. Qty. | Pkg. | |
Nickel-Plated Brass | |||
|---|---|---|---|
| 9/16" | 10 | 000000000 | 00000 |
Male/Male Dual-Sided Fabric Snap Halves
Once installed, these fasteners provide a male snap half on both sides of your fabric. Create a complete snap by joining each male side with a female snap half for a finished look on assembled layers of fabric.
For technical drawings and 3-D models, click on a part number.
| Snap Dia. | Pkg. Qty. | Pkg. | |
Nickel-Plated Brass | |||
|---|---|---|---|
| 9/16" | 10 | 000000000 | 00000 |
Complete Fabric Snaps with Tapping Screw Stud
Everything you need to fasten a fabric snap to a solid surface. Use these snaps in drilled holes.
For technical drawings and 3-D models, click on a part number.
| Screw Size | Thread Lg. | Snap Dia. | Screw Material | For Use In | Pkg. Qty. | Pkg. | |
Nickel-Plated Brass | |||||||
|---|---|---|---|---|---|---|---|
| No. 7 | 3/8" | 9/16" | 18-8 Stainless Steel | Composite Board, Particleboard, Plywood, Wood | 6 | 000000000 | 00000 |
Male Fabric Snap Halves with Tapping Screw Stud
Use these snaps in drilled holes when you need to fasten a fabric snap to a solid surface. Pair them with a standard female snap half or a female/male dual-sided snap (sold separately) to create a complete snap. The tapping screw stud cuts its own threads in a pilot hole and the snap has a Phillips drive for easy installation.
18-8 stainless steel snaps have good corrosion resistance and are mildly magnetic.
Brass snaps are rust resistant, electrically conductive, and nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| Screw Size | Thread Lg. | Snap Dia. | Screw Material | For Use In | Drive Size | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. 8 | 3/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 00000 |
| No. 8 | 5/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
Nickel-Plated Brass | ||||||||
| No. 8 | 3/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
| No. 8 | 5/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
| No. 10 | 5/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
Complete Fabric Snap with Tapping Screw Stud Kits
Use these snaps when you need a fabric snap fastened to a solid surface. The tapping screw stud cuts its own threads in a pilot hole.
For technical drawings and 3-D models, click on a part number.
Snap Kits | Replacement Snaps | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Screw Size | Thread Lg. | Snap Dia. | Screw Material | For Use In | Includes | Each | Pkg. | ||
Nickel-Plated Brass | |||||||||
| No. 7 | 3/8" | 9/16" | 18-8 Stainless Steel | Composite Board, Particleboard, Plywood, Wood | Die Hand Punch Tool Six Female Fabric Snap Halves Six Male Fabric Snap Halves with Tapping Screw Studs | 000000000 | 000000 | 000000000 | 00000 |
Fabric Snaps with Threaded Stud
Use these snaps in threaded holes when you need to fasten a fabric snap to a solid surface. Pair them with a standard female snap half or a female/male dual-sided snap (sold separately) to create a complete snap. The threaded stud installs in threaded holes. Snaps have a Phillips drive for easy installation.
18-8 stainless steel snaps have good corrosion resistance and are mildly magnetic.
Brass snaps are rust resistant, electrically conductive, and nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| Style | Thread Size | Thread Lg. | Snap Dia. | Screw Material | For Use In | Drive Size | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | 8-32 | 3/16" | 1/2" | 18-8 Stainless Steel | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 00000 |
| A | 8-32 | 1/2" | 1/2" | 18-8 Stainless Steel | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 00000 |
Nickel-Plated Brass | |||||||||
| A | 8-32 | 3/8" | 1/2" | Brass | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 0000 |
| A | 8-32 | 5/8" | 1/2" | Brass | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 0000 |
| B | 10-32 | 3/8" | 9/16" | Brass | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 0000 |
Fabric Snaps with Drilling Screw Stud
When you need to fasten a fabric snap to a solid surface, drive these snap halves into place and pair with a standard female snap half or a female/male dual-sided snap (sold separately) to create a compete snap. The drilling screw stud drills its own hole and the snap has a Phillips drive for easy installation.
For technical drawings and 3-D models, click on a part number.
| Screw Size | Thread Lg. | Snap Dia. | Screw Material | For Use In | Drive Size | Pkg. Qty. | Pkg. | |
Nickel-Plated Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. 8 | 1/2" | 9/16" | 18-8 Stainless Steel | Aluminum, Fiberglass, Steel | No. 2 | 10 | 000000000 | 00000 |
| No. 8 | 1/2" | 9/16" | 410 Stainless Steel | Fiberglass, Steel | No. 2 | 10 | 000000000 | 0000 |
| No. 8 | 3/4" | 9/16" | 18-8 Stainless Steel | Aluminum, Fiberglass, Steel | No. 2 | 10 | 000000000 | 00000 |
Adhesive-Back Fabric Snaps
Peel off the backing and stick these male snap halves to flat or curved surfaces. Pair them with standard female snap halves (sold separately) to make a complete snap.
For technical drawings and 3-D models, click on a part number.
Blind-Rivet Style Fabric Snaps
Fasten these male snap halves to a solid surface when you only have access to one side. Pair them with a standard female snap half or a female/male dual-sided snap (sold separately) to create a complete snap. A blind rivet tool (sold separately) is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | Snap Dia. | For Hole Size | Dia. | Mandrel Material | Pkg. Qty. | Pkg. | |
Nickel-Plated Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.125"-0.188" | 0.299" | 9/16" | 0.125" | 0.125" | 18-8 Stainless Steel | 25 | 000000000 | 000000 |
| 0.188"-0.375" | 0.486" | 9/16" | 0.125" | 0.125" | 18-8 Stainless Steel | 25 | 000000000 | 00000 |
| 18-8 Stainless Steel Female Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 00000 |
| Black-Oxide Brass Female Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |
| Nickel-Plated Brass Female/Male Dual-Sided Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |
| Manual Tool for Blind Rivets | 0000000 | Each | 00000 |
| Nickel-Plated Brass Female Snap Halves (Pkg. of 10) | 000000000 | Pkg. | 0000 |