We will reply to your message within an hour.
More
These hinges are made of metal.
Thick leaves and a large diameter pin make these hinges good for use with heavy doors.
Turn a set screw to adjust the door 1/8" up or down after it's hung.
Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).
Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame.
Open doors past their frame to make extra room for people and large items, such as carts, furniture, and wheelchairs, to pass through.
Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.
Made of plastic with a metal additive, these hinges will set off metal detectors if a piece breaks off and falls into your line.
Springs in these hinges with holes automatically swing doors and gates closed behind you.
Springs in these hinges without holes automatically swing doors and gates closed behind you.
After a light push on the door, springs in these hinges swing doors and gates fully open.
The springs in these hinges swing doors and gates fully open after a light push on the door.
Use these hinges on lightweight screen and storm doors as well as small gates.
Tighten or loosen an adjustment screw to change the hinge resistance.
Eliminate slamming lids—these hinges hold lids open at their widest angle and then slowly pull them closed.
These hinges allow 360° of motion.
Lock these hinges open at any angle within their range of motion.
A stop keeps these hinges open at a set angle; push past the stop to open them to 180°.
Bearings allow these hinges to open and close doors smoothly. The mounting holes form an industry-standard half-moon shape.
The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.
A stud projects from the back of each hinge leaf to prevent the door from being forced open. The mounting holes form an industry-standard half-moon shape.
To reinforce loose or damaged hinges, mount one of these hinges to the top edge of the pull-side of the door.
Plastic bushings on these metal hinges prevent metal-to-metal contact that can release particles as hinges open and close.
Keep environments free of contaminants—with plastic hinge leaves and a metal pin, there's no metal-to-metal contact that can release particles as hinges open and close.
With leaf heights under 1/4", these tiny hinges are the smallest we offer.
Instead of mounting to the side of a door, mount these hinges to the top and bottom to allow doors to open wide.
When the cabinet door is closed, a portion of the frame leaf is exposed and the entire door leaf is hidden
Surface-mount these hinges to the side of a cabinet.
Slip the hinge pins into 11/32" Dia. × 5/16" Dp. holes in a cabinet.
Use hinges to add doors, lids, and machine guards to T-slotted framing.