Sensitive along their entire length, these switches are often used to signal when an overhead door closes or an item reaches the end of a conveyor.

Minimize false triggers—these switches require 10 lbs. of actuation force in order to shut off machinery immediately.

When a moving object contacts the actuator on these switches, they open or close a circuit. They have the rapid-closing action of a snap-acting switch, but with a larger actuator for large objects.

Sealed actuators prevent these switches from jamming, even when exposed to oil, sand, mud, or ice.

Start or stop equipment after a set number of rotations to avoid over-rotation.

Install these limit switches where changing a battery or routing wires might be difficult—they power themselves when a moving object contacts the actuator.

Protect machinery and ensure the safety of personnel—these switches will open the circuit when actuated even if a spring fails or the contacts stick.

A sealed actuator prevents these switches from jamming, even when exposed to sand, mud, or dirt. With a slim design, you can stack them together or fit them in tight spaces.

Rated NEMA 3S and IP69K, these switches can handle washdowns with high pressures and temperatures. They’re also protected from oil/coolant spraying, precipitation, and temporary submersion.

With a smaller footprint than other switch mats, these fit in confined spaces.

Customize the length of these switches by cutting them from a 25-foot roll.

These narrow switches are also thin enough to be hidden under carpeting or installed anywhere space is limited.

Made with stainless steel conductors, these switches resist corrosion in damp areas. They’re less than 1/4” thick, so they’ll fit under floor mats and in other tight spaces.