Connect T‐slotted rails and reinforce joints for structural stability.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Slide drawers, panels, and doors with these tracks and rollers.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Route wires, cables, and tubing along T‐slotted rails.

Make your T-slotted framing workstation more ergonomic. These positioning arms let you move tools and other items within reach, reducing fatigue and streamlining repetitive processes.

Bumpers and surface guards cushion doors and other moving parts to prevent damage and reduce noise.

Illuminate workstations, enclosures, and machines.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

This welded, one-piece strut channel combines two strut channels side-to-side.

Slide the strut channel into the tube for telescoping length adjustments.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

Run wires through the hollow stud of these nuts or use them as vents.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Push these nuts into place rather than threading them onto a fastener.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Use with hex nuts to connect threaded rod.

Notches on these washers grip the channel to keep them in place.

Attach strut channel at any point on a threaded rod without taking apart your assembly.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Provide a stable, nonmarring base for strut channel legs.

Mount strut channel away from walls.

Brackets mount on the outside of strut channel to allow trolley movement.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Hold two pieces of strut channel together so they can smoothly open or close.

A flat or half-round shape keeps water from pooling on these strut rails. Unlike a traditional C-shape strut, these rails prevent the buildup of bacteria and debris, making them ideal for use in sanitary or food production environments.

Mount to your strut channel to support rail, tube, or pipe.

Support and protect conduit by mounting it to strut channel.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

To provide corrosion resistance in wet environments, this framing is galvanized.

Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.

Create strong structures by welding this framing together. Add metal panels to close off openings.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

With their extra-smooth surface, these tops won’t trap dirt and oil.

A corrosion-resistant, stainless steel surface and sealed, plastic laminate bottom make these tops suitable for food service.

An economical alternative to wood tops, these tops resist stains, oils, and chemicals.

With thick steel and an all-welded construction, these legs support the highest capacities of all our workbench legs.

These legs provide more leg room than other styles.

With thick steel and an all-welded construction, a pair of legs can support up to 12,000 lbs. Remove and reposition the bolts to adjust height in 1" increments.

These legs provide more leg room than other styles. Remove and reposition the bolts to adjust height in 1" increments.

Store your heaviest tools and parts in these bases.

Stack these drawers under a workbench.

Transform a fixed-height workbench into an adjustable-height workbench with one of these kits.

Position these shelves at any angle.

Prevent tools and parts from rolling off a workbench.

Use these legs to make or repair a folding table.

Make your own sawhorse with these brackets and five 2 × 4s, 2 × 6s, or 2 × 12s.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.

For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t.