Brushed Stainless Steel | McMaster-Carr

Filter by

System of Measurement

Thickness

Width

Length

Shape

Material

Stainless Steel Appearance Number

Specifications Met

DFARS Compliance

Fabrication

Wall Thickness

Hardness

Maximum Temperature

REACH Compliance

RoHS Compliance

Hardness Rating

Yield Strength

Elongation

Outside Width

Outside Height

Inside Width

Forward

How can we improve?

298 Products

About Stainless Steel

Determine if stainless steel is the right material for you and which types will work best.

Polished Multipurpose 304 Stainless Steel

Polished to either a brushed or mirror-like finish, this material is widely used to fabricate decorative enclosures and industrial workstations. The sheets, strips, bars, and adhesive-back foil are covered with a protective peel-off film. 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Brushed #3 finish has grain lines running in one direction to mask fingerprints. Brushed #4 is often called a satin finish; it’s similar to a #3 finish, except the grain lines are finer. Bars are polished on all sides.

Foil, sheets, and strips are polished on one side. Rectangular and round tubes are polished on the outside.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Foil

Yield Strength: 30,000 psi
Hardness: Rockwell B80 (Medium)
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: ASTM A240

Plain Back
Thick.	Thick. Tolerance	Wd.	Fabrication		10 ft. Lg.	25 ft. Lg.	50 ft. Lg.	100 ft. Lg.
Brushed
0.002"	-0.0002" to 0.0002"	12"	Cold Worked	0000000	00	00	0000000	0000000
0.002"	-0.0002" to 0.0002"	24"	Cold Worked	0000000	00	00	000000	000000
0.005"	-0.0003" to 0.0003"	12"	Cold Worked	0000000	0000000	0000000	000000	000000
0.005"	-0.0003" to 0.0003"	24"	Cold Worked	0000000	000000	000000	000000	00000000

Sheets

Brushed #3

Brushed #4

Yield Strength: 30,000 psi
Hardness: Rockwell B80 (Medium)
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: ASTM A240

6" × 6" (Brushed #3)
Thick.	Thick. Tolerance	Fabrication		Each
0.024"	-0.004" to 0.004"	Cold Worked	000000000	00000
0.03"	-0.003" to 0.003"	Cold Worked	000000000	0000
0.036"	-0.003" to 0.003"	Cold Worked	000000000	00000
0.048"	-0.003" to 0.003"	Cold Worked	000000000	00000
0.06"	-0.006" to 0.006"	Cold Worked	000000000	00000
0.075"	-0.006" to 0.006"	Cold Worked	000000000	00000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	00000
0.12"	-0.005" to 0.005"	Cold Worked	000000000	00000
6" × 6" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	0000000	0000
0.036"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.048"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.06"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.078"	-0.005" to 0.005"	Cold Worked	0000000	00000
0.105"	-0.007" to 0.007"	Cold Worked	0000000	00000
0.12"	-0.007" to 0.007"	Cold Worked	0000000	00000
0.18"	-0.007" to 0.007"	Cold Worked	0000000	00000
1/4"	-0.01" to 0.022"	Hot Rolled	0000000	00000
3/8"	-0.01" to 0.05"	Hot Rolled	0000000	00000
6" × 12" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.036"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.048"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.06"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.078"	-0.005" to 0.005"	Cold Worked	0000000	00000
0.105"	-0.007" to 0.007"	Cold Worked	0000000	00000
0.12"	-0.007" to 0.007"	Cold Worked	0000000	00000
0.18"	-0.007" to 0.007"	Cold Worked	0000000	00000
12" × 12" (Brushed #3)
0.024"	-0.004" to 0.004"	Cold Worked	00000000	00000
0.03"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.036"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.048"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.06"	-0.006" to 0.006"	Cold Worked	00000000	00000
0.075"	-0.006" to 0.006"	Cold Worked	00000000	00000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	00000
0.12"	-0.005" to 0.005"	Cold Worked	00000000	00000
12" × 12" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.036"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.048"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.06"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.078"	-0.005" to 0.005"	Cold Worked	0000000	00000
0.105"	-0.007" to 0.007"	Cold Worked	0000000	00000
0.12"	-0.007" to 0.007"	Cold Worked	0000000	00000
0.18"	-0.007" to 0.007"	Cold Worked	0000000	000000
1/4"	-0.01" to 0.01"	Hot Rolled	0000000	00000
3/8"	-0.01" to 0.05"	Hot Rolled	0000000	000000
12" × 18" (Brushed #3)
0.024"	-0.004" to 0.004"	Cold Worked	000000000	00000
0.03"	-0.003" to 0.003"	Cold Worked	000000000	00000
0.036"	-0.003" to 0.003"	Cold Worked	000000000	00000
0.048"	-0.003" to 0.003"	Cold Worked	000000000	00000
0.06"	-0.006" to 0.006"	Cold Worked	000000000	00000
0.075"	-0.006" to 0.006"	Cold Worked	000000000	00000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	000000
0.12"	-0.005" to 0.005"	Cold Worked	000000000	000000
12" × 18" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	00000000	00000
0.036"	-0.004" to 0.004"	Cold Worked	00000000	00000
0.048"	-0.004" to 0.004"	Cold Worked	00000000	00000
0.06"	-0.004" to 0.004"	Cold Worked	00000000	00000
0.078"	-0.005" to 0.005"	Cold Worked	00000000	00000
0.105"	-0.007" to 0.007"	Cold Worked	00000000	000000
0.12"	-0.007" to 0.007"	Cold Worked	00000000	000000
0.18"	-0.007" to 0.007"	Cold Worked	00000000	000000
1/4"	-0.01" to 0.01"	Hot Rolled	00000000	000000
3/8"	-0.07" to 0.07"	Hot Rolled	00000000	000000
12" × 24" (Brushed #3)
0.024"	-0.004" to 0.004"	Cold Worked	00000000	00000
0.03"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.036"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.048"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.06"	-0.006" to 0.006"	Cold Worked	00000000	00000
0.075"	-0.006" to 0.006"	Cold Worked	00000000	00000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	000000
0.12"	-0.005" to 0.005"	Cold Worked	00000000	000000
12" × 24" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.036"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.048"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.06"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.078"	-0.005" to 0.005"	Cold Worked	0000000	00000
0.105"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.12"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.18"	-0.007" to 0.007"	Cold Worked	0000000	000000
1/4"	-0.01" to 0.01"	Hot Rolled	0000000	000000
3/8"	-0.01" to 0.05"	Hot Rolled	0000000	000000
12" × 36" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.036"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.048"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.06"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.078"	-0.005" to 0.005"	Cold Worked	0000000	000000
0.105"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.12"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.18"	-0.007" to 0.007"	Cold Worked	0000000	000000
12" × 48" (Brushed #3)
0.024"	-0.004" to 0.004"	Cold Worked	000000000	00000
0.03"	-0.003" to 0.003"	Cold Worked	000000000	00000
0.036"	-0.003" to 0.003"	Cold Worked	000000000	00000
0.048"	-0.003" to 0.003"	Cold Worked	000000000	000000
0.06"	-0.006" to 0.006"	Cold Worked	000000000	000000
0.075"	-0.006" to 0.006"	Cold Worked	000000000	000000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	000000
0.12"	-0.005" to 0.005"	Cold Worked	000000000	000000
12" × 48" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.036"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.048"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.06"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.078"	-0.005" to 0.005"	Cold Worked	0000000	000000
0.105"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.12"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.18"	-0.007" to 0.007"	Cold Worked	0000000	000000
1/4"	-0.01" to 0.022"	Hot Rolled	0000000	000000
3/8"	-0.01" to 0.05"	Hot Rolled	0000000	000000
24" × 24" (Brushed #3)
0.024"	-0.004" to 0.004"	Cold Worked	00000000	00000
0.03"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.036"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.048"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.06"	-0.006" to 0.006"	Cold Worked	00000000	000000
0.075"	-0.006" to 0.006"	Cold Worked	00000000	000000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	000000
0.12"	-0.005" to 0.005"	Cold Worked	00000000	000000
24" × 24" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	0000000	00000
0.036"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.048"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.06"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.078"	-0.005" to 0.005"	Cold Worked	0000000	000000
0.105"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.12"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.18"	-0.007" to 0.007"	Cold Worked	0000000	000000
1/4"	-0.01" to 0.01"	Hot Rolled	0000000	000000
3/8"	-0.01" to 0.05"	Hot Rolled	0000000	000000
24" × 36" (Brushed #3)
0.024"	-0.004" to 0.004"	Cold Worked	00000000	00000
0.03"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.036"	-0.003" to 0.003"	Cold Worked	00000000	00000
0.048"	-0.003" to 0.003"	Cold Worked	00000000	000000
0.06"	-0.006" to 0.006"	Cold Worked	00000000	000000
0.075"	-0.006" to 0.006"	Cold Worked	00000000	000000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	000000
0.12"	-0.005" to 0.005"	Cold Worked	00000000	000000
24" × 36" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.036"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.048"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.06"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.078"	-0.005" to 0.005"	Cold Worked	0000000	000000
0.105"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.12"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.18"	-0.007" to 0.007"	Cold Worked	0000000	000000
1/4"	-0.01" to 0.022"	Hot Rolled	0000000	000000
3/8"	-0.01" to 0.05"	Hot Rolled	0000000	000000
24" × 48" (Brushed #3)
0.024"	-0.004" to 0.004"	Cold Worked	000000000	00000
0.03"	-0.003" to 0.003"	Cold Worked	000000000	000000
0.036"	-0.003" to 0.003"	Cold Worked	000000000	000000
0.048"	-0.003" to 0.003"	Cold Worked	000000000	000000
0.06"	-0.006" to 0.006"	Cold Worked	000000000	000000
0.075"	-0.006" to 0.006"	Cold Worked	000000000	000000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	000000
0.12"	-0.005" to 0.005"	Cold Worked	000000000	000000
24" × 48" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.036"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.048"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.06"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.078"	-0.005" to 0.005"	Cold Worked	00000000	000000
0.105"	-0.007" to 0.007"	Cold Worked	00000000	000000
0.12"	-0.007" to 0.007"	Cold Worked	00000000	000000
0.18"	-0.007" to 0.007"	Cold Worked	00000000	000000
1/4"	-0.01" to 0.01"	Hot Rolled	00000000	000000
36" × 48" (Brushed #3)
0.024"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.03"	-0.003" to 0.003"	Cold Worked	00000000	000000
0.036"	-0.003" to 0.003"	Cold Worked	00000000	000000
0.048"	-0.003" to 0.003"	Cold Worked	00000000	000000
0.06"	-0.006" to 0.006"	Cold Worked	00000000	000000
0.075"	-0.006" to 0.006"	Cold Worked	00000000	000000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	000000
0.12"	-0.005" to 0.005"	Cold Worked	00000000	000000
36" × 48" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.036"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.048"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.06"	-0.004" to 0.004"	Cold Worked	0000000	000000
0.078"	-0.005" to 0.005"	Cold Worked	0000000	000000
0.105"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.12"	-0.007" to 0.007"	Cold Worked	0000000	000000
0.18"	-0.007" to 0.007"	Cold Worked	0000000	000000
1/4"	-0.01" to 0.022"	Hot Rolled	0000000	000000
36" × 96" (Brushed #3)
0.024"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.03"	-0.003" to 0.003"	Cold Worked	00000000	000000
0.036"	-0.003" to 0.003"	Cold Worked	00000000	000000
0.048"	-0.003" to 0.003"	Cold Worked	00000000	000000
0.06"	-0.006" to 0.006"	Cold Worked	00000000	000000
0.075"	-0.006" to 0.006"	Cold Worked	00000000	000000
0.09"	-0.005" to 0.005"	Cold Worked	000000000	000000
0.12"	-0.005" to 0.005"	Cold Worked	00000000	000000
36" × 96" (Brushed #4)
0.03"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.036"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.048"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.06"	-0.004" to 0.004"	Cold Worked	00000000	000000
0.078"	-0.005" to 0.005"	Cold Worked	00000000	000000
0.105"	-0.007" to 0.007"	Cold Worked	00000000	000000
0.12"	-0.007" to 0.007"	Cold Worked	00000000	00000000
0.18"	-0.007" to 0.007"	Cold Worked	00000000	00000000
1/4"	-0.01" to 0.022"	Hot Rolled	00000000	00000000

Bars

Brushed #4

Yield Strength: 30,000 psi
Hardness:
1/4" Thick.: Rockwell B90 (Medium)
All other sizes: Not Rated
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: See table

Brushed #4
Thick.	Thick. Tolerance	Wd.	Specifications Met		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/4"	-0.01" to 0.05"	1"	ASTM A240	0000000	000000	000000	000000	000000	000000
1/4"	-0.01" to 0.05"	2"	ASTM A240	0000000	00000	00000	00000	00000	000000
1/4"	-0.01" to 0.05"	3"	ASTM A240	0000000	00000	00000	00000	00000	000000
1/2"	-0.015" to 0.015"	1"	__	0000000	00000	00000	00000	00000	000000
1/2"	-0.015" to 0.015"	2"	__	0000000	00000	00000	000000	000000	000000
1/2"	-0.015" to 0.015"	3"	__	0000000	00000	00000	000000	000000	000000
1"	-0.02" to 0.02"	1"	__	0000000	00000	00000	000000	000000	000000
1"	-0.02" to 0.02"	2"	__	0000000	00000	000000	000000	000000	000000
1"	-0.02" to 0.02"	3"	__	0000000	00000	000000	000000	000000	000000

Strips

Brushed #3

Yield Strength: 30,000 psi
Hardness: See table
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: See table

1" × 24" (Brushed #3)
Thick.	Thick. Tolerance	Fabrication	Hardness	Specifications Met	Flatness Tolerance		Each
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	00000000	000000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	00000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	00000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	00000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	00000000	00000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	00000000	00000
2" × 12" (Brushed #3)
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
2" × 24" (Brushed #3)
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
3" × 12" (Brushed #3)
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
3" × 24" (Brushed #3)
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
4" × 12" (Brushed #3)
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
4" × 24" (Brushed #3)
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
5" × 12" (Brushed #3)
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
5" × 24" (Brushed #3)
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
6" × 24" (Brushed #3)
0.024"	-0.002" to 0.002"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.048"	-0.003" to 0.003"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.063"	-0.006" to 0.006"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
0.09"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
1/8"	-0.009" to 0.009"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000

Rectangular Tubes

Brushed #4

Yield Strength: 30,000 psi
Hardness: Not Rated
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: ASTM A554

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Fabrication	Straightness Tolerance		1/2 ft. Lg.	1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
Brushed #4
0.065" Wall Thick. (-0.007" to 0.007" Tolerance)
1"	-0.015" to 0.015"	1"	-0.015" to 0.015"	0.87"	0.87"	Welded	1/8" per 3 ft.	00000000	000000	000000	000000	0000000
1 1/2"	-0.020" to 0.020"	1 1/2"	-0.020" to 0.020"	1.37"	1.37"	Welded	1/8" per 3 ft.	00000000	00000	00000	00000	000000
0.12" Wall Thick. (-0.012" to 0.012" Tolerance)
1 1/2"	-0.020" to 0.020"	1 1/2"	-0.020" to 0.020"	1.26"	1.26"	Welded	1/8" per 3 ft.	00000000	00000	00000	00000	000000
2"	-0.020" to 0.020"	2"	-0.020" to 0.020"	1.76"	1.76"	Welded	1/8" per 3 ft.	00000000	00000	00000	000000	000000

Round Tubes

Brushed #4

Yield Strength:
Inch Sizes: Not Rated
Metric Sizes: 24,000 psi
Hardness:
Inch Sizes: Rockwell B80 (Medium)
Metric Sizes: Rockwell B70 (Medium)
Heat Treatment: See table
Heat Treatable: No
Specifications Met:
Inch Sizes: ASTM A554
Metric Sizes: ASTM A269

Brushed #4
OD	OD Tolerance	ID	Fabrication	Heat Treatment	Straightness Tolerance		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1mm Wall Thick. (-0.015mm to 0.015mm Tolerance)
10mm	-0.130mm to 0.130mm	8mm	Seamless	Annealed (Softened)	Not Rated	0000000	000000	000000	0000000
15mm	-0.130mm to 0.130mm	13mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	00000	000000
20mm	-0.130mm to 0.130mm	18mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
2mm Wall Thick. (-0.03mm to 0.03mm Tolerance)
8mm	-0.130mm to 0.130mm	4mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
10mm	-0.130mm to 0.130mm	6mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
12mm	-0.130mm to 0.130mm	8mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
15mm	-0.130mm to 0.130mm	11mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
20mm	-0.130mm to 0.130mm	16mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
25mm	-0.130mm to 0.130mm	21mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
50mm	-0.250mm to 0.250mm	46mm	Seamless	Annealed (Softened)	Not Rated	0000000	000000	000000	000000
3mm Wall Thick. (-0.3mm to 0.3mm Tolerance)
12mm	-0.130mm to 0.130mm	6mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
15mm	-0.130mm to 0.130mm	9mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
20mm	-0.130mm to 0.130mm	14mm	Seamless	Annealed (Softened)	Not Rated	0000000	00000	000000	000000
25mm	-0.130mm to 0.130mm	19mm	Seamless	Annealed (Softened)	Not Rated	0000000	000000	000000	000000
50mm	-0.250mm to 0.250mm	44mm	Seamless	Annealed (Softened)	Not Rated	0000000	000000	000000	000000

Polished Economical 430 Stainless Steel

Yield Strength: 30,000 psi
Hardness: Rockwell B95 (Medium)
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: ASTM A240

One side of these sheets is polished to a brushed #3 finish with grain lines running in one direction to mask fingerprints. The polished side is covered with a protective peel-off film. Use 430 stainless steel in decorative and light structural applications, rather than outdoors or in extreme temperatures. It maintains its corrosion resistance in temperatures up to 1250° F.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Brushed #3
Thick.	Thick. Tolerance	Mechanical Finish	Magnetic Properties		6" × 12"	12” × 12”	12” × 24”	24” × 24”	48" × 48"
0.035"	-0.002" to 0.002"	Polished	Magnetic	0000000	000000	000000	000000	0000000	0000000
0.046"	-0.004" to 0.004"	Polished	Magnetic	0000000	00000	00000	00000	000000	000000
0.06"	-0.004" to 0.004"	Polished	Magnetic	0000000	00000	00000	000000	000000	000000
0.075"	-0.004" to 0.004"	Polished	Magnetic	0000000	00000	00000	000000	000000	000000

Polished Corrosion-Resistant 316 Stainless Steel

Brushed

Yield Strength: 30,000 psi
Hardness: Rockwell B95 (Medium)
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: ASTM A240

One side of these sheets is polished to either a brushed or mirror-like finish, then covered in a protective peel-off film. The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Brushed sheets are polished to a #4 finish, which is often called a satin finish. It has fine grain lines running in one direction to mask fingerprints.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Brushed #4
Thick.	Thick. Tolerance	Fabrication	Mechanical Finish		6” × 6”	12” × 12”	12” × 24”	24” × 24”
0.03"	-0.007" to 0.007"	Cold Worked	Polished	0000000	00	000000	000000	0000000
0.036"	-0.007" to 0.007"	Cold Worked	Polished	0000000	00	00000	000000	000000
0.048"	-0.007" to 0.007"	Cold Worked	Polished	0000000	000000	00000	000000	000000
0.06"	-0.01" to 0.01"	Cold Worked	Polished	0000000	00000	00000	000000	000000
0.075"	-0.01" to 0.01"	Cold Worked	Polished	0000000	00000	00000	000000	000000
0.105"	-0.01" to 0.01"	Cold Worked	Polished	0000000	00000	000000	000000	000000
0.12"	-0.01" to 0.01"	Cold Worked	Polished	0000000	000000	000000	000000	000000
0.187"	-0.01" to 0.01"	Cold Worked	Polished	0000000	000000	000000	000000	000000
1/4"	-0.01" to 0.01"	Cold Worked	Polished	0000000	000000	000000	000000	00000000