We will reply to your message within an hour.
Join different metals, such as cast iron, carbon steels, copper, bronze, and copper-nickel alloys.
Join copper, copper-silicon, and copper-zinc to themselves and to steel.
Join copper, brass, or bronze.
Use these ERCuAl-A2 rods to join different metals, such as cast iron, steel, stainless steel, copper, and bronze.
Weld copper, brass, or bronze.
Rosin flux is quick acting with strong cleaning action, but it leaves residue that requires flux remover.
The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint. Rosin flux is quick acting with strong cleaning action but leaves residue that requires flux remover.
Wash away flux residue from this solder with water.
The flux leaves minimal residue so there's no need for cleanup.
The five flux cores in this solder allow fast soldering that uses solder efficiently and reduces the heat to your joint. The flux it’s filled with leaves minimal residue so there’s no cleanup. This solder is electrically conductive, making it good for electronics and electrical applications.
Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.
Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.
Electrically conductive, this solder is best for electronics and electronics applications.
This solder is commonly used in solder melting pots
The high melting point prevents remelting when soldering successive joints with another solder.
This solder is commonly used in solder melting pots.
Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.
Even as temperatures approach absolute zero, this indium solder remains soft and malleable, allowing it to form an airtight seal between metal and certain non-metal materials..
Made with indium this solder is soft and malleable—even as temperatures approach absolute zero—allowing this solder to form an airtight seal between metal and certain non-metal materials. Thanks to its ribbon shape, this solder is easier to use on large, flat areas than wire solder.
Use this solder for general purpose applications.
The flux residue easily washes away with water.
The flux leaves minimal residue so there's no cleanup.
This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.
This solder meets NSF/ANSI Standard 61 for drinking water.
Composed of pure tin, this solder is safe for use with food service equipment.
The silver in this solder helps it resist vibration to form strong joints in HVAC systems. Since it doesn’t have a flux core, you can choose the flux that works best for your application.
This bismuth-tin solder has similar performance properties to lead solder, but is also safe for use in food-processing equipment and copper water pipes.
This flux has strong cleaning action and leaves residue that will not compromise the reliability of the joint.
With the strongest cleaning power, this flux is fully activated to clean and prepare electrical assemblies and printed circuit boards for soldering applications up to 840° F.
This flux leaves minimal residue so there's no cleanup. It cleans and prepares electrical assemblies and printed circuit boards for soldering.
Providing the strongest cleaning power, this flux leaves residue that must be removed to ensure the reliability of the joint.
This flux has less cleaning action, but leaves the least amount of residue.
Also known as solder slugs, these pellets create strong, electrically conductive connections between battery terminal lugs and cable.
Use these brazing alloys with a variety of metals.
No need to add flux—these alloys have it built in.
When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard gap-filling brazing alloys.
Fill in tight gaps without needing to add flux before you braze—these alloys have flux built in. When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard brazing alloys.
Create stronger bonds than standard brazing alloys.
Don't worry about adding flux when brazing corrosion resistant metals such as 300-series stainless steel—these alloys have it built in.
Use these alloys on metal subject to corrosion.
Join metal in inert atmospheres or vacuum conditions, such as furnace brazing.
To fill in large gaps, these BAg-2 alloys melt into a thicker liquid than standard brazing alloys.
Join aluminum to copper and copper-based alloys, such as brass and bronze.
Everything you need to start brazing most metals in general purpose applications.
Melting into a thick liquid, these BCuP-3 alloys fill in larger gaps than standard brazing alloys for copper.
Join copper and copper alloys in general purpose applications.
Join copper tubing and tube fittings with these BCuP-5 alloys that create a stronger bond than standard brazing alloys for copper.
These BCuP-5 alloys create stronger bonds than standard brazing alloys for copper.
Also known as trimetal brazing strips, these alloys have silver with nickel alloy sides and a copper core.
Use this flux with silver and copper-based brazing alloys to clean and prepare surfaces.