We will reply to your message within an hour.
More
Use these washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.
As a screw is tightened, these washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.
As a screw is tightened, these metric washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.
Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.
Choose these washers for their adherence to strict military standards for material and construction.
Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.
These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.
Also known as Oilite® bearings.
Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food.
Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.
These durable wash guns are typically used for frequent washdowns and cleanup.
Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.
Use two types of bristles on one brush.
The handle curves sharply for cleaning in hard-to-reach spots.
Use two types of bristles on one brush to remove light-to-medium rust and stains and small burs.
Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.
These Y-strainers for low-pressure applications have good corrosion resistance.
For use in medium-pressure applications, these Y-strainers have good corrosion resistance.
With a smaller overall size than T-strainers of the same pipe size, these are well suited to applications in close quarters.
Bronze basket strainers are stronger and more corrosion resistant than iron basket strainers.