About Hammers
More
Mallets
Drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with faces that are softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
Bronze faces are good for striking non-ferrous metal, such as aluminum, nickel, and titanium.
Hickory handles resist vibration.
Textured and ribbed grips provide slip resistance.
Mallets | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Rectangular Face | Replacement Handles | ||||||||||
| Head Wt. | Round Face Dia. | Lg. | Wd. | Overall Lg. | Grip Style | Handle Replaceable | Each | Each | |||
Round Face with Hickory Handle | |||||||||||
| K | 8 oz. | 1" | __ | __ | 10 1/2" | Plain | Replaceable | 0000000 | 000000 | 000000 | 00 |
| K | 1 lbs. | 1" | __ | __ | 12 1/2" | Textured | Replaceable | 0000000 | 00000 | 000000 | 00 |
Round × Rectangular Face with Hickory Handle | |||||||||||
| Q | 12 oz. | 13/16" | 3/8" | 3/8" | 11" | Ribbed | Replaceable | 0000000 | 00000 | 00000000 | 000000 |
| Q | 1 1/4 lbs. | 1" | 1/2" | 1/2" | 12" | Ribbed | Replaceable | 0000000 | 00000 | 00000000 | 00000 |
| Q | 1 1/2 lbs. | 1 1/8" | 5/8" | 5/8" | 13" | Ribbed | Replaceable | 0000000 | 00000 | 00000000 | 00000 |
Nonsparking Mallets
The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking, resist corrosion, and are nonmagnetic. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. All are suitable for driving chisels and striking work without damaging its surface. To avoid marring the workpiece, use these mallets on material that is harder than the metal faces. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. A textured grip provides slip resistance. For replacement handles, see Fiberglass Hammer Handles.
Warning: Do not use these tools in direct contact with acetylene.
| Head Wt., lbs. | Face Dia. | Overall Lg. | Handle Material | Grip Style | Handle Replaceable | Specifications Met | Each | |
Aluminum-Bronze Face | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 | 1 1/2" | 14" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 0000000 |
| 4 | 2" | 15" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
| 6 | 2 1/8" | 15" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
Nonsparking Ball Peen Hammers
The face and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking, resist corrosion, and are nonmagnetic. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels. All have a textured grip for slip resistance. For replacement handles, see Fiberglass Hammer Handles.
Warning: Do not use these tools in direct contact with acetylene.
| Head Wt., oz. | Face Dia. | Overall Lg. | Face Material | Handle Replaceable | Specifications Met | Each | |
Fiberglass Handle with Textured Grip | |||||||
|---|---|---|---|---|---|---|---|
| 4 | 3/4" | 9 3/4" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
| 12 | 1" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 00000 |
| 16 | 1 1/4" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 00000 |
| 24 | 1 1/4" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 00000 |
| 32 | 1 1/2" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
| 36 | 1 5/8" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
| 44 | 1 3/4" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
Sledge Hammers
Demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, choose a hammer with a face that's harder than your workpiece. Longer and heavier hammers deliver greater impact.
10" to 16" long hammers are also known as engineers', drilling, club, and crack hammers. Use them for light demolition and tasks where longer hammers don't have room to swing.
Bronze faces are good for striking non-ferrous metal, such as aluminum, nickel, and titanium.
Hickory handles resist vibration. Handles with a fiberglass core resist breakage if you miss your mark.
Textured and ribbed grips provide slip resistance.
Hammers | Replacement Handles | |||||||
|---|---|---|---|---|---|---|---|---|
| Head Wt., lbs. | Face Lg. | Face Wd. | Overall Lg. | Handle Replaceable | Each | Each | ||
Rectangular Bronze Face | ||||||||
Hickory Handle—Ribbed Grip | ||||||||
| 1 3/8 | 7/8" | 7/8" | 12" | Replaceable | 0000000 | 000000 | 00000000 | 000000 |
| 2 1/4 | 1 1/4" | 1 1/4" | 13" | Replaceable | 0000000 | 00000 | 00000000 | 00000 |
| 4 1/4 | 1 1/2" | 1 1/2" | 14" | Replaceable | 0000000 | 000000 | 00000000 | 00000 |
Polyurethane Rubber Handle with Fiberglass Core—Ribbed Grip | ||||||||
| 1 1/2 | 7/8" | 7/8" | 12" | Nonreplaceable | 0000000 | 00000 | 000000 | 00 |
| 2 3/8 | 1 1/4" | 1 1/4" | 12" | Nonreplaceable | 0000000 | 000000 | 000000 | 00 |
| 4 3/8 | 1 1/2" | 1 1/2" | 14" | Nonreplaceable | 0000000 | 000000 | 000000 | 00 |
Nonsparking Sledge Hammers
The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, ensure that the workpiece is softer than the metal faces. Longer and heavier hammers deliver greater impact. All have a textured or ribbed grip for slip resistance. For replacement handles, see Fiberglass Hammer Handles.
14" long hammers are also known as engineers', drilling, club, lump, and crack hammers. Use them for light demolition and tasks where longer hammers don't have room to swing.
33" long hammers can be swung with both hands to deliver a more powerful strike than shorter hammers.
Warning: Do not use these tools in direct contact with acetylene.
| Head Wt., lbs. | Face Dia. | Overall Lg. | Handle Material | Grip Style | Handle Replaceable | Specifications Met | Each | |
Aluminum-Bronze Face | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 | 1 3/8" | 14" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 0000000 |
| 2 1/2 | 1 3/8" | 14" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
| 2 3/4 | 1 1/2" | 14" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
| 3 | 1 1/2" | 14" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
| 6 | 2" | 33" | Fiberglass | Ribbed | Replaceable | FM Approved | 0000000 | 000000 |
| 8 | 2 1/8" | 33" | Fiberglass | Ribbed | Replaceable | FM Approved | 0000000 | 000000 |
| 10 | 2 1/4" | 33" | Fiberglass | Ribbed | Replaceable | FM Approved | 0000000 | 000000 |
| 16 | 2 5/8" | 33" | Fiberglass | Ribbed | Replaceable | FM Approved | 0000000 | 000000 |
Nonsparking Nail Hammers
The face and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use them to drive and remove nails. All have a textured grip for slip resistance. For replacement handles, see Fiberglass Hammer Handles.
Warning: Do not use these tools in direct contact with acetylene.
| Head Wt., oz. | Face Dia. | Overall Lg. | Face Material | Face Texture | Handle Material | Grip Style | Handle Replaceable | Specifications Met | Each | |
Curved Claw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 12 | 7/8" | 14" | Aluminum-Bronze | Smooth | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
| 16 | 1" | 14" | Aluminum-Bronze | Smooth | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 00000 |
| 20 | 1 1/8" | 14" | Aluminum-Bronze | Smooth | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
Nonsparking Blacksmiths' Hammers
The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use the flat end of the head to strike metal, concrete, and stone; the wedge-shaped end is for shaping and bending metal. These tools are also known as cross-peen hammers. A textured grip provides slip resistance. For replacement handles, see Fiberglass Hammer Handles.
Warning: Do not use these tools in direct contact with acetylene.
| Head Wt., lbs. | Face Lg. | Face Wd. | Overall Lg. | Face Material | Handle Replaceable | Specifications Met | Each | |
Fiberglass Handle with Textured Grip | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 1/2 | 1 5/16" | 1 5/16" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 0000000 |
| 2 1/2 | 1 1/2" | 1 1/2" | 15" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
| 3 1/2 | 1 7/8" | 1 7/8" | 15" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
Tack Hammers
Also known as upholstery and pin hammers, these tools have a small head for driving tacks and pins in confined areas.
Nonsparking 0.401" Round Shank Chisels for Chiseling and Riveting Hammers
Made of aluminum-bronze that is FM approved, these chisels satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as zip gun chisels, they’re for use with air-powered hammers.
Warning: Do not use these tools in direct contact with acetylene.
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Blade Wd. | O'all Lg. | Type | Size | Lg. | Material | Each | |
Offset Chisel Bit Blade | |||||||
| 1 1/4" | 6 3/4" | Round | 0.401" | 1 1/4" | Aluminum-Bronze | 0000000 | 000000 |
Nonsparking 0.495" Octagonal Shank Chisels for Needle Scalers
Made of aluminum-bronze that is Factory Mutual approved, this chisel inhibits sparking and is nonmagnetic and corrosion resistant. It satisfies OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use with Air-Powered Needle Scalers/Chiseling Hammers.
Warning: Do not use this tool in direct contact with acetylene.
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Chisel Bit Blade Type | Blade Wd. | O'all Lg. | Type | Size | Lg. | Each | |
| Flat | 2" | 7 3/4" | Octagon | 0.495" | 5/8" | 0000000 | 0000000 |
Nonsparking 0.680" Round Shank Chisels for Chipping Hammers
Made of aluminum-bronze that is Factory Mutual approved, these chisels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use with air-powered chipping hammers.
Warning: Do not use these tools in direct contact with acetylene.
Nonsparking 1 1/8" Hex Shank Chisels for Pavement-Breaker Hammers
Made of aluminum-bronze that is Factory Mutual approved, these chisels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use with electric and air-powered pavement-breaker hammers.
Warning: Do not use these tools in direct contact with acetylene.