We will reply to your message within an hour.
More
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
Thickness and width are oversized to allow for finishing.
These bars are precision ground on the top and bottom for a tight thickness tolerance of ±0.002".
954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.
954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.
Precision ground on the top and bottom, these bars have a tight thickness tolerance of ±0.002".
The thickness and width are oversized to allow for finishing.
Diameter is oversized to allow for finishing.
These rods are precision ground for a tight diameter tolerance of ±0.0005".
Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.
An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.
An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.
AMPCO® 18 is a premium aluminum-bronze alloy that combines strength with superior wear resistance.
Known for its ability to resist stress cracking and fatigue, 544 bronze also offers good formability and excellent machinability. It's commonly called phosphor bronze.
Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated. These bars are a higher-strength alternative to tight-tolerance 954 bearing bronze bars.
Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated.
The addition of nickel gives 630 bronze high strength. It is also called aluminum-nickel-bronze.
Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.
Commonly called silicon-bronze, 655 bronze contains more silicon than other bronze alloys, making it suitable for all types of welding.
A low-lead alternative to 316 bronze, 642 bronze is just as machinable with higher strength. It is also called aluminum-silicon-bronze.
For a good combination of strength, machinability, and weldability, choose 955 bronze.
Offering excellent formability, 220 bronze is known for its ability to withstand outdoor exposure. It's commonly called commercial bronze.
Also known as leaded commercial bronze, 316 contains lead for good machinability.
Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.
Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
Made of aluminum-bronze that is Factory Mutual approved, these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
The head grips and extracts nails, tacks, and brads. Also known as claw bars.
Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Melt and pour these alloys into molds to create metal parts and prototypes.
Able to withstand vandalism better than other crossbars, these mortise mount into a cutout in the door.
Crossbars open doors with a push and are often used on emergency exits.
Rugged construction withstands impact from carts, dollies, and other equipment.