Compare over 30 copper, brass, and bronze alloys to find the right material for you—all with material certificates for traceability.
Oversized Weldable 954 Bearing Bronze Bars
- Yield Strength: 29,000 psi
- Hardness: Rockwell B85 (Medium)
- Temper: M07
- Heat Treatable: Yes
- Specifications Met: ASTM B505
Thickness and width are oversized to allow for finishing. 954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/4" Thick. (0.067" to 0.142" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1" | 0.007" per inch | 0000000 | |||||
| 1 1/2" | 0.007" per inch | 0000000 | |||||
| 2" | 0.007" per inch | 0000000 | |||||
| 2 1/2" | 0.007" per inch | 0000000 | |||||
| 3" | 0.007" per inch | 0000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
| 6" | 0.007" per inch | 00000000 | |||||
3/8" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1" | 0.007" per inch | 0000000 | |||||
| 1 1/2" | 0.007" per inch | 0000000 | |||||
| 2" | 0.007" per inch | 0000000 | |||||
| 2 1/2" | 0.007" per inch | 0000000 | |||||
| 3" | 0.007" per inch | 0000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
1/2" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1/2" | 0.007" per inch | 00000000 | |||||
| 1" | 0.007" per inch | 0000000 | |||||
| 1 1/2" | 0.007" per inch | 0000000 | |||||
| 2" | 0.007" per inch | 0000000 | |||||
| 2 1/2" | 0.007" per inch | 0000000 | |||||
| 3" | 0.007" per inch | 0000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
| 6" | 0.007" per inch | 00000000 | |||||
5/8" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1" | 0.007" per inch | 0000000 | |||||
| 1 1/2" | 0.007" per inch | 0000000 | |||||
| 2" | 0.007" per inch | 00000000 | |||||
| 3" | 0.007" per inch | 00000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
3/4" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 3/4" | 0.007" per inch | 00000000 | |||||
| 1" | 0.007" per inch | 00000000 | |||||
| 1 1/2" | 0.007" per inch | 00000000 | |||||
| 2" | 0.007" per inch | 00000000 | |||||
| 3" | 0.007" per inch | 00000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
1" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1" | 0.007" per inch | 00000000 | |||||
| 1 1/2" | 0.007" per inch | 00000000 | |||||
| 2" | 0.007" per inch | 00000000 | |||||
| 3" | 0.007" per inch | 00000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
| 5" | 0.007" per inch | 00000000 | |||||
| 6" | 0.007" per inch | 00000000 | |||||
1 1/4" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1 1/4" | 0.007" per inch | 00000000 | |||||
| 2" | 0.007" per inch | 00000000 | |||||
| 3" | 0.007" per inch | 00000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
1 1/2" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1 1/2" | 0.007" per inch | 00000000 | |||||
| 2" | 0.007" per inch | 00000000 | |||||
| 2 1/2" | 0.007" per inch | 00000000 | |||||
| 3" | 0.007" per inch | 00000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
| 6" | 0.007" per inch | 00000000 | |||||
2" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 2" | 0.007" per inch | 00000000 | |||||
| 3" | 0.007" per inch | 00000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
| 6" | 0.007" per inch | 00000000 | |||||
2 1/2" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 4" | 0.007" per inch | 00000000 | |||||
3" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 3" | 0.007" per inch | 00000000 | |||||
| 4" | 0.007" per inch | 00000000 | |||||
4" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 4" | 0.007" per inch | 00000000 | |||||
Tight-Tolerance Weldable 954 Bearing Bronze Bars
- Yield Strength: 32,000 psi
- Hardness: Not Rated
- Temper: M07
- Heat Treatable: Yes
- Specifications Met: ASTM B505
These bars are precision ground on the top and bottom for a tight thickness tolerance of ±0.002". 954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
1 ft. Lg. | 2 ft. Lg. | |||||
|---|---|---|---|---|---|---|
| Wd. | Mechanical Finish | Flatness Tolerance | Each | Each | ||
1/4" Thick. (-0.002" to 0.002" Tolerance) | ||||||
| 1" | Precision Ground | Not Rated | 0000000 | 000000 | 0000000 | 0000000 |
| 1 1/2" | Precision Ground | Not Rated | 0000000 | 00000 | 000000 | 00 |
| 2" | Precision Ground | Not Rated | 0000000 | 00000 | 0000000 | 000000 |
| 2 1/2" | Precision Ground | Not Rated | 0000000 | 000000 | 000000 | 00 |
| 3" | Precision Ground | Not Rated | 0000000 | 000000 | 0000000 | 000000 |
3/8" Thick. (-0.002" to 0.002" Tolerance) | ||||||
| 1" | Precision Ground | Not Rated | 0000000 | 00000 | 0000000 | 000000 |
| 2" | Precision Ground | Not Rated | 0000000 | 000000 | 0000000 | 000000 |
| 3" | Precision Ground | Not Rated | 0000000 | 000000 | 000000 | 00 |
1/2" Thick. (-0.002" to 0.002" Tolerance) | ||||||
| 1" | Precision Ground | Not Rated | 0000000 | 00000 | 0000000 | 000000 |
| 2" | Precision Ground | Not Rated | 0000000 | 000000 | 0000000 | 000000 |
| 3" | Precision Ground | Not Rated | 0000000 | 000000 | 0000000 | 000000 |
| 6" | Precision Ground | Not Rated | 0000000 | 000000 | 000000 | 00 |
3/4" Thick. (-0.002" to 0.002" Tolerance) | ||||||
| 1" | Precision Ground | Not Rated | 0000000 | 000000 | 0000000 | 000000 |
| 1 1/2" | Precision Ground | Not Rated | 0000000 | 000000 | 000000 | 00 |
| 2" | Precision Ground | Not Rated | 0000000 | 000000 | 0000000 | 000000 |
| 3" | Precision Ground | Not Rated | 0000000 | 000000 | 0000000 | 000000 |
Weldable 954 Bearing Bronze Rods
- Yield Strength: 32,000 psi
- Hardness: Rockwell B85 (Medium)
- Temper: M07
- Heat Treatable: Yes
- Specifications Met: ASTM B505
954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance Range | Straightness Tolerance | 6" Lg. | 13" Lg. | 36" Lg. | 72" Lg. | |
| 3/8" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 1/2" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 5/8" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 3/4" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 7/8" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 1" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 1 1/4" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 1 1/2" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 1 5/8" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 1 3/4" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 2" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 2 1/4" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 2 1/2" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 2 3/4" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 3" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 3 1/2" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 4" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 4 1/2" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 5" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 | ||||
| 6" | 0.0525" to 0.145" | 1/4" per 5 ft. | 0000000 |
Weldable 954 Bearing Bronze Tubes
- Yield Strength: 32,000 psi
- Hardness: Rockwell B85 (Medium)
- Temper: M07
- Heat Treatable: Yes
- Specifications Met: ASTM B505
954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| OD | OD Tolerance Range | ID | ID Tolerance Range | Straightness Tolerance | 6 1/2" Lg. | 13" Lg. | |
1/4" Wall Thick. | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/4" | 0.055" to 0.145" | 3/4" | -0.155" to -0.055" | 1/4" per 5 ft. | 000000 | ||
| 1 1/2" | 0.055" to 0.145" | 1" | -0.155" to -0.055" | 1/4" per 5 ft. | 000000 | ||
| 1 3/4" | 0.055" to 0.145" | 1 1/4" | -0.155" to -0.055" | 1/4" per 5 ft. | 000000 | ||
| 2" | 0.055" to 0.145" | 1 1/2" | -0.155" to -0.055" | 1/4" per 5 ft. | 000000 | ||
| 2 1/4" | 0.055" to 0.145" | 1 3/4" | -0.155" to -0.055" | 1/4" per 5 ft. | 000000 | ||
| 2 1/2" | 0.055" to 0.145" | 2" | -0.155" to -0.055" | 1/4" per 5 ft. | 000000 | ||
| 3" | 0.055" to 0.145" | 2 1/2" | -0.155" to -0.055" | 1/4" per 5 ft. | 000000 | ||
| 3 1/2" | 0.055" to 0.145" | 3" | -0.155" to -0.055" | 1/4" per 5 ft. | 000000 | ||
3/8" Wall Thick. | |||||||
| 1 3/4" | 0.055" to 0.145" | 1" | -0.155" to -0.055" | 1/4" per 5 ft. | 000000 | ||
| 2" | 0.055" to 0.145" | 1 1/4" | -0.155" to -0.055" | 1/4" per 5 ft. | 00000000 | ||
| 2 1/4" | 0.055" to 0.145" | 1 1/2" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 2 1/2" | 0.055" to 0.145" | 1 3/4" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
1/2" Wall Thick. | |||||||
| 2" | 0.055" to 0.145" | 1" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 2 1/2" | 0.055" to 0.145" | 1 1/2" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 2 3/4" | 0.055" to 0.145" | 1 3/4" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 3" | 0.055" to 0.145" | 2" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 3 1/2" | 0.055" to 0.145" | 2 1/2" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 4" | 0.055" to 0.145" | 3" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 5" | 0.055" to 0.145" | 4" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 5 1/2" | 0.055" to 0.145" | 4 1/2" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 6" | 0.055" to 0.145" | 5" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
5/8" Wall Thick. | |||||||
| 2 1/2" | 0.055" to 0.145" | 1 1/4" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 3" | 0.055" to 0.145" | 1 3/4" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
| 3 3/4" | 0.055" to 0.145" | 2 1/2" | -0.155" to -0.055" | 1/4" per 5 ft. | 0000000 | ||
3/4" Wall Thick. | |||||||
| 2 1/2" | 0.055" to 0.145" | 1" | -0.155" to -0.055" | 1/4" per 5 ft. | 00000000 | ||
| 3 1/2" | 0.055" to 0.145" | 2" | -0.155" to -0.055" | 1/4" per 5 ft. | 00000000 | ||
| 5 1/2" | 0.055" to 0.145" | 4" | -0.155" to -0.055" | 1/4" per 5 ft. | 00000000 | ||
1" Wall Thick. | |||||||
| 3" | 0.055" to 0.145" | 1" | -0.155" to -0.055" | 1/4" per 5 ft. | 00000000 | ||
| 4" | 0.055" to 0.145" | 2" | -0.155" to -0.055" | 1/4" per 5 ft. | 00000000 | ||
| 4 1/2" | 0.055" to 0.145" | 2 1/2" | -0.155" to -0.055" | 1/4" per 5 ft. | 00000000 | ||
| 5" | 0.055" to 0.145" | 3" | -0.155" to -0.055" | 1/4" per 5 ft. | 00000000 | ||
1 1/2" Wall Thick. | |||||||
| 6" | 0.055" to 0.145" | 3" | -0.155" to -0.055" | 1/4" per 5 ft. | 00000000 | ||