Brass Sheet Stock | McMaster-Carr

Filter by

Material

Filler Material

System of Measurement

Thickness

Width

Length

Shape

Temper Rating

Appearance

Hardness Rating

Specifications Met

Certificate Type

DFARS Compliance

RoHS Compliance

Temper Designation

REACH Compliance

Tolerance Rating

Hardness

Yield Strength

Fabrication

Shim Stock Form

Heat Treatable

Density

Forward

How can we improve?

1,070 Products

About Copper, Brass, & Bronze

Compare electrical conductivity, machinability, formability, and more to identify the best material for your application.

Wear-, Impact-, and Chemical-Resistant PTFE Sheets

Wear-, Impact-, and
Chemical-Resistant PTFE Sheets

Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.

Brass

Ultra-Formable 260 Brass Sheets and Strips

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Brushed Ultra-Formable 260 Brass Sheets

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

Mirror-Like Ultra-Formable 260 Brass Sheets

Polished on one side to a reflective, mirror-like finish.

Formable Easy-to-Machine
353 Brass Sheets and Bars

353 brass is more formable than 385 brass while maintaining good machinability. Commonly called engraver’s brass, it’s well suited for fabrication processes such as knurling and threading. Use it to make nuts, gears, drawer pulls, and hinges.

Ultra-Machinable 360 Brass Bars

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

Brushed Weldable Marine-Grade 464 Brass Sheets

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

Mirror-Like Weldable
Marine-Grade 464 Brass Sheets

Polished on one side to a reflective, mirror-like finish.

Weldable Marine-Grade 464 Brass Sheets and Bars

A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.

Easy-to-Machine Architectural 385 Brass Bars

Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

Bronze

Ultra-Strength Easy-to-Form 510 Bronze Sheets

Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.

Easy-to-Form 220 Bronze

Offering excellent formability, 220 bronze is known for its ability to withstand outdoor exposure. It's commonly called commercial bronze.

Oil-Filled 840 and 841 Bearing Bronze Sheets

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

Oversized Weldable 954 Bearing Bronze Bars

Thickness and width are oversized to allow for finishing.

Tight-Tolerance Weldable 954 Bearing Bronze Bars

These bars are precision ground on the top and bottom for a tight thickness tolerance of ±0.002".

Oversized 932 Bearing Bronze Bars

The thickness and width are oversized to allow for finishing.

Tight-Tolerance 932 Bearing Bronze Bars

Precision ground on the top and bottom, these bars have a tight thickness tolerance of ±0.002".

Easy-to-Machine 936 Bearing Bronze Bars

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

Tight-Tolerance High-Strength
863 Bearing Bronze Bars

Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated. These bars are a higher-strength alternative to tight-tolerance 954 bearing bronze bars.

Fasteners

Shim Stock

Cut this stock into custom shapes to fit your application.

Shim Stock Sets

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

Peel-Away Layered Shim Stock

Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Adhesive-Back Shim Stock

A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.

Made-to-Order Peel-Away Layered Shims

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Made-to-Order Shims

Send us a drawing, and we'll cut your custom shim.

Shim Stock Assortments

Create a custom shim to fit your application.

Cloth, Mesh, Wool and Perforated Sheets

Brass Perforated Sheets

Brass is softer and easier to form compared to other metals.

Bronze Wire Cloth

Bronze is more abrasion resistant than brass and copper for a longer service life.

Brass Wire Cloth with Rectangular Openings

Maximize flow when straining your liquid process lines—material passes more quickly through this wire cloth's rectangular openings than through other wire cloth.

Brass Wire Cloth

More corrosion-resistant in salt water than stainless steel, these brass wire cloths are often used in marine environments.