Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.

Transfer and spray water at low pressure. This hose comes with brass fittings, which are softer than stainless steel fittings for easier threading.

The blended rubber cover on this hose won't break down if exposed to oil, animal fats, or grease as you wash down equipment with hot water.

With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.

Reach for this neoprene rubber hose to handle processes requiring high-pressure, high-temperature washdowns.

The steel wire reinforcement gives this hose extra strength in high-pressure conditions.

Offering excellent UV and ozone resistance, this rubber hose is a good fit for outdoor applications.

Hose blends the flexibility of PVC with the durability and abrasion resistance of rubber.

Let go of this hose and it retracts back to its original coiled form.

Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.

Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

Use this durable, flexible hose in pressures up to 5,000 psi. Its braided construction gives it the highest pressure rating of any chemical hose in our offering.

Yarn reinforcement gives this hose good strength under pressure.

Attach barbed fittings to this hose for use in low-pressure air applications.

An extra-strong yarn reinforcement gives this hose excellent durability to handle higher pressures than standard air hose.

The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.

Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting.

Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.

Use this neoprene hose in temperatures up to 210° F.

Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment.

With a tough EPDM cover, this hose won’t wear down from rubbing or scraping, crack from ozone, or degrade from UV light. It has flanged ends that join with quick-clamp fittings, so you can easily access lines that carry milk, syrup, meat, and other wet food and drinks.

Made of platinum-cured silicone, this hose stays strong and flexible across a wide temperature range. Use it with juice, meat, milk, poultry, and syrup.

Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages.

Transport wet food and drink at high pressures with a hose connected by sanitary fittings.

Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed. Its fittings easily detach, giving you quick access to your line.

Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.

Move coolant around tight turns in crowded spaces. Made of silicone, these elbows withstand high temperatures up to 350° F.

With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.

Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.

Rated for low-pressure applications up to 500 psi, this hose works well as a return line in your hydraulic system.

Transfer fluid between pumps, cylinders, and other parts of your hydraulic system with this hose that has attached fittings to save time and eliminate points of failure.

Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system.

Transfer industrial gases in temperatures up to 1500° F with this hose.

This hose meets CGA (Compressed Gas Association) standards for use with oxygen and acetylene gas.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

Multi-spiral yarn reinforcement gives this hose strength to withstand pressures up to 250 psi.

The fittings are also known as an instrumentation fittings. They have two sleeves (double ferrules) that bite into metal tubing for a strong seal.

This hose is made of tough gum rubber that stands up to sand, steel shot, and other abrasives.

Also known as pin-rack hose, this hose can be folded to fit in a rack.

Lightweight yet tough, this hose has an abrasion-resistant polyester cover.