We will reply to your message within an hour.
Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.
Ball-and-socket connections allow 360° positioning.
Heavy duty construction adds strength for higher load capacities than other positioning arms.
Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.
These clamps rotate and pivot to ensure the rod hangs straight, even on sloped beams.
Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.
For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.
A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.
Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.
These clamps have a fixed hanger for rigid connections.
Add a crossbeam for hanging lifting equipment, creating overhead conveyor systems, and supporting structural applications.
Join two beams in a straight line.
Support strut channel at a right angle to the beam.
Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.
Route bundles of wire and cable through a single hook. A wide opening allows access for installation, adjustment, and removal.
Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.
Clamp around a pipe or tube to guide rope.
Brackets are sized to mount sensors and reflectors to a conveyor frame.
Clamp these brackets onto a rod or tubing that's up to 3/4" in diameter.
Attached to an arm you can flex into position, these clamps hold objects such as a flashlight, tool, or instructions.
Quickly install and remove the clamp-on base from a benchtop.
Hold your smallest workpieces in these vises, which have a clamp-on base for quick installation and removal from a benchtop.
Designed for precision grinding and inspection, the construction of these vises ensures workpieces are held perfectly square. They are also known as toolmakers’ vises.
The base and three sides of the vise are ground flat, enabling mounting on its base, either side, or upright.
Free up a hand while using your Dremel on a workpiece.
Use these accessories to mount carriers to your machinery without creating an obstruction.
Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.
Clamp an outlet strip to your work surface to quickly plug in and unplug devices.