Sanitary Stainless Steel Washdown Enclosures
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4724n26-@halfx_637208098512982925.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4724n11multinegative_right_positive_front_flop15_1585150143_958@halfx_637207300007918748.png?ver=imagenotfound)
With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments. Each has a sloped roof that lets liquid drain quickly without pooling. They’re IP66 and IP69K rated, meaning they withstand the high-pressure, high-temperature washdowns that are typical in food processing plants. Made of stainless steel, these enclosures won’t corrode from frequent contact with harsh cleaners and sanitizers.
The seal on these enclosures keeps water and other contaminants from getting in. It’s FDA-compliant for direct food contact, meaning it won’t contaminate food if it breaks off and falls into your line. It’s bright blue too, so it’s easy to spot and remove.
For use indoors or out, these enclosures are also NEMA 4X and NEMA 13 rated to protect against dirt, oil, water, and coolant. UL and C-UL listed, they meet U.S. and Canadian safety standards.
Enclosures with a lift-off cover have internal mounting bosses for attaching small electrical devices, components, and DIN rail.
Enclosures with a hinged cover have an internal hinge that lets the seal cover the entire door opening joint free. They have one or two locks, each of which has an external locking design without any crevices where water and bacteria could build up. Mount components to the removable panel.
To leave space for cleaning behind your enclosure, offset it from the wall with a sanitary standoff.
For technical drawings and 3-D models, click on a part number.
Ht. | Wd. | Dp. | Slope Angle | Environment | Environmental Rating | No. of Locks | No. of Keys Included | Specifications Met | Each | |
Lift-Off Cover and Screw Closure | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
6 3/4" | 6 3/4" | 3" | 10° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | __ | __ | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 0000000 |
7" | 7" | 4 3/4" | 10° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | __ | __ | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 000000 |
9" | 9" | 4 3/4" | 10° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | __ | __ | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 000000 |
9" | 12 3/4" | 4 3/4" | 10° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | __ | __ | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 000000 |
9" | 16 1/2" | 4 3/4" | 10° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | __ | __ | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 000000 |
12 3/4" | 16 3/4" | 4 3/4" | 10° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | __ | __ | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 000000 |
Hinged Cover and Key-Lock Closure | ||||||||||
17 1/4" | 8 1/2" | 6" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 1 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
21 1/2" | 15 1/4" | 8 1/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
21 1/2" | 31 3/4" | 8 1/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
23 1/2" | 24" | 11 3/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
26 1/4" | 20" | 8 1/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
30 1/4" | 15 1/4" | 8 1/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
30 1/4" | 24" | 8 1/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
32 1/4" | 31 3/4" | 11 3/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
36 1/2" | 24" | 8 1/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
38 1/2" | 30" | 11 3/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
48" | 31 3/4" | 11 3/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
56" | 31 3/4" | 11 3/4" | 30° | Corrosive, Food Industry, Oily, Outdoor, Sanitary, Washdown, Wet Location | IP66, IP69K, NEMA 4X, NEMA 13 | 2 | 1 | FDA Compliant 21 CFR 177.2600, UL Listed, C-UL Listed | 0000000 | 00000000 |
Sanitary Push-Button Stainless Steel Washdown Enclosures
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have either threaded standoffs or an offset mounting bracket to create space between them and their mounting surface for easy cleaning. Made of 316L stainless steel, they won’t corrode from harsh cleaners. All have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself.
Enclosures with threaded standoffs include gaskets that are FDA compliant for safe use around food. Block off unused mounting holes in these enclosures with threaded hole plugs to keep out contaminants.
Enclosures with a DIN rail mount let you mount electronics inside without having to drill holes.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/810/8105n124multipositive_front_positive_right_standard15_1619732784_935@halfx_637553118673368751.png?ver=imagenotfound)
Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Holes | No. of Columns | No. of Rows | Ht. | Wd. | Dp. | Environment | Environmental Rating | Closure Screw Type | No. of Holes | Hole Dia. | Includes | Specifications Met | Each | |
316L Stainless Steel with Lift-Off Cover and Screw Closure | ||||||||||||||
For 22 mm Push Button | ||||||||||||||
1 | 1 | 1 | 4" | 4" | 2 3/4" | Corrosive, Damp, Dusty, Food Industry, High-Pressure Washdown, Oily, Outdoor, Sanitary, Submersible, Washdown | IP66; IP69K; NEMA 4X; NEMA 13 | Captive | 2 | 0.276" | Threaded Standoffs | UL Listed, C-UL Listed, CSA Certified, CE Marked, FDA Compliant 21 CFR 177.2600 | 00000000 | 0000000 |
2 | 1 | 2 | 6" | 4" | 2 3/4" | Corrosive, Damp, Dusty, Food Industry, High-Pressure Washdown, Oily, Outdoor, Sanitary, Submersible, Washdown | IP66; IP69K; NEMA 4X; NEMA 13 | Captive | 2 | 0.276" | DIN Rail Mount, Threaded Standoffs | UL Listed, C-UL Listed, CSA Certified, CE Marked, FDA Compliant 21 CFR 177.2600 | 00000000 | 000000 |
3 | 1 | 3 | 8" | 4" | 2 3/4" | Corrosive, Damp, Dusty, Food Industry, Oily, Outdoor, Sanitary, Submersible, Washdown | IP66; NEMA 4X; NEMA 13 | Captive | 2 | 0.276" | DIN Rail Mount, Threaded Standoffs | UL Listed, C-UL Listed, CSA Certified, CE Marked, FDA Compliant 21 CFR 177.2600 | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/810/8105n135multipositive_front_positive_right_standard15_1619733699_754@halfx_637553128182820771.png?ver=imagenotfound)
Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Holes | No. of Columns | No. of Rows | Ht. | Wd. | Dp. | Environment | Environmental Rating | Closure Screw Type | No. of Holes | Hole Dia. | Includes | Specifications Met | Each | |
316L Stainless Steel with Lift-Off Cover and Screw Closure | ||||||||||||||
For 22 mm Push Button | ||||||||||||||
1 | 1 | 1 | 4" | 4" | 2 3/4" | Corrosive, Damp, Dusty, Food Industry, High-Pressure Washdown, Oily, Outdoor, Sanitary, Submersible, Washdown | IP66; IP69K; NEMA 4X; NEMA 13 | Captive | 4 | 0.315" | DIN Rail Mount | UL Listed, C-UL Listed, CSA Certified, CE Marked | 00000000 | 0000000 |
2 | 1 | 2 | 6" | 4" | 2 3/4" | Corrosive, Damp, Dusty, Food Industry, High-Pressure Washdown, Oily, Outdoor, Sanitary, Submersible, Washdown | IP66; IP69K; NEMA 4X; NEMA 13 | Captive | 4 | 0.315" | DIN Rail Mount | UL Listed, C-UL Listed, CSA Certified, CE Marked | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/780/7805n111multipositive_right_negative_front_standard15_1619787839_442@halfx_637553666792824664.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/780/7805n111multinegative_right_positive_front_standard15_1619731528_865@halfx_637553104558909648.png?ver=imagenotfound)
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Pitch, mm | Type | Head Dia., mm | Environmental Rating | Specifications Met | Each | |
316L Stainless Steel with Silicone Rubber Seal | |||||||
M10 | 1.5 | Metric | 19.7 | IP66 | FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
Sanitary Push-Button Flush-Mount Stainless Steel Washdown Enclosures
![](/prerenderstable/mvPRE/contents/gfx/imagecache/810/8105n171multipositive_front_positive_right_standard15_1619737258_782@halfx_637553162078911465.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/810/8105n171multinegative_front_negative_right_standard15_1620248524_875@halfx_637558274437148021.png?ver=imagenotfound)
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself. Made of 316L stainless steel, they won’t corrode from harsh cleaners. These enclosures have interior DIN rail mounts so you can install electronics without drilling holes. All have a gasketed cover that’s FDA compliant for direct contact with food.
For technical drawings and 3-D models, click on a part number.
Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Holes | No. of Columns | No. of Rows | Ht. | Wd. | Dp. | Environment | Environmental Rating | Closure Screw Type | No. of Holes | Hole Dia. | Includes | Specifications Met | Each | |
316L Stainless Steel with Lift-Off Cover and Screw Closure | ||||||||||||||
For 22 mm Push Button | ||||||||||||||
3 | 3 | 1 | 8 1/4" | 10 1/2" | 3 3/8" | Corrosive, Damp, Dusty, Food Industry, Oily, Outdoor, Sanitary, Submersible, Washdown | IP66; NEMA 4X; NEMA 13 | Captive | 4 | 0.236" | DIN Rail Mount | UL Listed, C-UL Listed, CSA Certified, CE Marked, FDA Compliant 21 CFR 177.2600 | 00000000 | 0000000 |
Sanitary Push-Button Shrouded Stainless Steel Washdown Enclosures
Protect electronics from washdowns in food plants and other sanitary environments. For easy cleaning, these enclosures have threaded standoffs to create space against the mounting surface and a sloped top to prevent water and debris from collecting. Made of 316L stainless steel, they won’t corrode from harsh cleaners. These enclosures have interior DIN rail mounts so you can install electronics without drilling holes. All standoffs include gaskets that are FDA compliant for safe use around food.
These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.
Block off unused mounting holes with threaded hole plugs to keep out contaminants.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/810/8105n157multipositive_front_positive_right_standard15_1619735717_449@halfx_637553150599606608.png?ver=imagenotfound)
Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Holes | No. of Columns | No. of Rows | Ht. | Wd. | Dp. | Environment | Environmental Rating | Closure Screw Type | No. of Holes | Hole Dia. | Includes | Specifications Met | Each | |
316L Stainless Steel with Lift-Off Cover and Screw Closure | ||||||||||||||
For 22 mm Push Button | ||||||||||||||
1 | 1 | 1 | 5 3/4" | 4 1/2" | 4 1/2" | Corrosive, Damp, Dusty, Food Industry, High-Pressure Washdown, Oily, Outdoor, Sanitary, Submersible, Washdown | IP66; IP69K; NEMA 4X; NEMA 13 | Captive | 2 | 0.276" | DIN Rail Mount, Threaded Standoffs | UL Listed, C-UL Listed, CSA Certified, CE Marked, FDA Compliant 21 CFR 177.2600 | 00000000 | 0000000 |
3 | 1 | 3 | 10" | 4 1/2" | 4 1/2" | Corrosive, Damp, Dusty, Food Industry, High-Pressure Washdown, Oily, Outdoor, Sanitary, Submersible, Washdown | IP66; IP69K; NEMA 4X; NEMA 13 | Captive | 2 | 0.276" | DIN Rail Mount, Threaded Standoffs | UL Listed, C-UL Listed, CSA Certified, CE Marked, FDA Compliant 21 CFR 177.2600 | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/780/7805n111multipositive_right_negative_front_standard15_1619787839_442@halfx_637553666792824664.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/780/7805n111multinegative_right_positive_front_standard15_1619731528_865@halfx_637553104558909648.png?ver=imagenotfound)
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Pitch, mm | Type | Head Dia., mm | Environmental Rating | Specifications Met | Each | |
316L Stainless Steel with Silicone Rubber Seal | |||||||
M10 | 1.5 | Metric | 19.7 | IP66 | FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
Food Industry Plastic Pans
![](/prerenderstable/mvPRE/contents/gfx/imagecache/414/4141t4p1-f01a-digital@halfx_637076353136301842.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/414/4141t1p1-f01a-digital@halfx_637076287630484270.png?ver=imagenotfound)
Pans that meet NSF/ANSI 2 adhere to sanitary standards for food-processing environments.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/414/4141t4p1-f01a-digital@halfx_637076353136301842.png?ver=imagenotfound)
Bottom Inside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Lg. | Wd. | Ht. | Lg. | Wd. | Color | Autoclavable | Max. Temp., °F | Specifications Met | Each | |
3 gal. | 20 3/4" | 16 1/2" | 3" | 20 1/2" | 16 1/4" | White | No | 180° | NSF/ANSI 2 | 000000 | 000000 |
3 3/4 gal. | 17 1/2" | 15 1/2" | 4" | 17 1/4" | 15 1/4" | White | No | 180° | NSF/ANSI 2 | 0000000 | 00000 |
5 gal. | 23" | 19" | 4" | 22 1/4" | 18 1/2" | White | No | 180° | NSF/ANSI 2 | 000000 | 00000 |
8 gal. | 29 1/4" | 23 1/4" | 4" | 29" | 23" | White | No | 180° | NSF/ANSI 2 | 000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/414/4141t1p1-f01a-digital@halfx_637076287630484270.png?ver=imagenotfound)
Bottom Inside | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Lg. | Wd. | Ht. | Lg. | Wd. | Color | Autoclavable | Max. Temp., °F | Space Saving Features | Specifications Met | Each | |
96 fl. oz. | 15" | 6 1/2" | 4" | 12 1/2" | 4 1/8" | White | No | 180° | Nestable | NSF/ANSI 2 | 000000 | 000000 |
1 gal. | 15" | 8 1/2" | 4" | 12 1/4" | 5 3/4" | White | No | 180° | Nestable | NSF/ANSI 2 | 000000 | 00000 |
1 3/4 gal. | 17 3/4" | 14" | 4" | 15 1/2" | 11" | White | No | 180° | Nestable | NSF/ANSI 2 | 000000 | 00000 |
Food Industry Fiberglass Pans
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4727t41p1-f01a-digital@halfx_637082263246661909.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4727t752p1-f01a-digital@halfx_637082294722913573.png?ver=imagenotfound)
Often used in cafeterias and food-processing areas, these pans meet NSF/ANSI 2 standards for food equipment.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4727t752p1-f01a-digital@halfx_637082294722913573.png?ver=imagenotfound)
Bottom Inside | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Lg. | Wd. | Ht. | Lg. | Wd. | Autoclavable | Max. Temp., °F | Space Saving Features | Specifications Met | Choose a Color | Each | |
1 1/4 gal. | 18 3/4" | 11 7/8" | 1 3/4" | 17" | 11" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 000000 | |
1 1/4 gal. | 22" | 12" | 1 1/4" | 21 1/8" | 11 1/8" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
3 gal. | 23 3/8" | 12" | 3 1/8" | 21 1/8" | 11 1/8" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
5 gal. | 30 3/8" | 15 7/8" | 2 3/4" | 29 5/8" | 15 1/8" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
5 3/4 gal. | 23 3/8" | 12" | 6" | 21" | 11" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
9 1/4 gal. | 31 3/4" | 19 1/8" | 4 1/2" | 29 3/4" | 18" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 | |
10 1/4 gal. | 25 3/4" | 15 3/4" | 7 1/4" | 23 1/2" | 14" | Yes | 250° | Stackable | NSF/ANSI 2 | 0000000 | 00000 |
Sanitary Right-Angle Speed Reducers for Face-Mount AC Motors
![](/prerenderstable/mvPRE/contents/gfx/imagecache/766/7660n112--7595b1854e81589465681-p9@halfx_637250444967259187.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/766/7660n111--22f11cf11721589465681-p9@halfx_637250444972880504.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/766/7660n112l1-1589465829-p9@halfx_637250446489231559.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/766/7660n111l1-1589465829-p9@halfx_637250446526247882.png?ver=imagenotfound)
With a sanitary design for food-processing environments, these speed reducers mount to the face of your motor—no coupler required—to slow shafts and increase torque while transmitting motion at a 90° angle. The 316 stainless steel housing resists corrosion from frequent washdowns with harsh cleaners. Rated IP69K, they’re dust- and water-tight against high-pressure and high-temperature washdowns. Rounded edges and a polished surface make the housing easy to clean and leave no crevices for bacteria to grow in. To protect against leaks and contamination, they have double input and output seals.
Since multiple teeth come in contact at once, these speed reducers are more durable and create more torque than other speed reducers of the same size. They’re often used to generate large amounts of torque in tight spaces. To save maintenance time, they’re permanently lubricated.
Radial loads are loads that are perpendicular to the shaft. They’re commonly caused by components attached to shaft, such as pulleys and sprockets.
For technical drawings and 3-D models, click on a part number.
Max. Output | Max. Input | Output Shaft | Overall | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Speed Ratio | Torque | Speed, rpm | Speed, rpm | hp | For Input Shaft Dia. | Dia. | Lg. | Ctr.-to-Ctr. Shaft Distance | Lg. | Wd. | Ht. | Radial Load Cap., lbs. | Choose an Output Shaft Location | Each | |
For NEMA 56C Motor | |||||||||||||||
5:1 | 429 in.-lbs. @ 1,750 rpm | 350 | 1,750 | 2.53 | 5/8" | 3/4" | 2.063" | 1.54" | 9.49" | 7.56" | 6.7" | 450 | 0000000 | 000000000 | |
5:1 | 736 in.-lbs. @ 1,750 rpm | 350 | 1,750 | 2.96 | 5/8" | 1 1/8" | 2.087" | 1.97" | 10.126" | 7.94" | 7.496" | 950 | 0000000 | 00000000 | |
10:1 | 597 in.-lbs. @ 1,750 rpm | 175 | 1,750 | 1.84 | 5/8" | 3/4" | 2.063" | 1.54" | 9.49" | 7.56" | 6.7" | 450 | 0000000 | 00000000 | |
20:1 | 957 in.-lbs. @ 1,750 rpm | 87 | 1,750 | 1.55 | 5/8" | 1" | 2.063" | 1.75" | 9.49" | 7.56" | 7.06" | 750 | 0000000 | 00000000 | |
30:1 | 912 in.-lbs. @ 1,750 rpm | 58 | 1,750 | 1 | 5/8" | 1" | 2.063" | 1.75" | 9.49" | 7.56" | 7.06" | 750 | 0000000 | 00000000 | |
40:1 | 643 in.-lbs. @ 1,750 rpm | 43 | 1,750 | 0.59 | 5/8" | 3/4" | 2.063" | 1.54" | 9.49" | 7.56" | 6.7" | 450 | 0000000 | 00000000 | |
50:1 | 840 in.-lbs. @ 1,750 rpm | 35 | 1,750 | 0.64 | 5/8" | 1" | 2.063" | 1.75" | 9.49" | 7.56" | 7.06" | 750 | 0000000 | 00000000 | |
60:1 | 594 in.-lbs. @ 1,750 rpm | 29 | 1,750 | 0.39 | 5/8" | 3/4" | 2.063" | 1.54" | 9.49" | 7.56" | 6.7" | 450 | 0000000 | 00000000 | |
60:1 | 807 in.-lbs. @ 1,750 rpm | 29 | 1,750 | 0.53 | 5/8" | 1" | 2.063" | 1.75" | 9.49" | 7.56" | 7.06" | 750 | 0000000 | 00000000 | |
60:1 | 1,050 in.-lbs. @ 1,750 rpm | 29 | 1,750 | 0.69 | 5/8" | 1 1/8" | 2.087" | 1.97" | 10.126" | 7.94" | 7.496" | 950 | 0000000 | 00000000 | |
For NEMA 140TC Motor | |||||||||||||||
5:1 | 574 in.-lbs. @ 1,750 rpm | 350 | 1,750 | 2.9 | 7/8" | 1" | 2.063" | 1.75" | 9.49" | 7.56" | 7.06" | 750 | 0000000 | 00000000 | |
20:1 | 957 in.-lbs. @ 1,750 rpm | 87 | 1,750 | 1.55 | 7/8" | 1" | 2.063" | 1.75" | 9.49" | 7.56" | 7.06" | 750 | 0000000 | 00000000 | |
50:1 | 840 in.-lbs. @ 1,750 rpm | 35 | 1,750 | 0.64 | 7/8" | 1" | 2.063" | 1.75" | 9.49" | 7.56" | 7.06" | 750 | 0000000 | 00000000 | |
60:1 | 807 in.-lbs. @ 1,750 rpm | 29 | 1,750 | 0.53 | 7/8" | 1" | 2.063" | 1.75" | 9.49" | 7.56" | 7.06" | 750 | 0000000 | 00000000 |