McMaster-Carr logo
    Filter by
    Fabrication
    System of Measurement
    Washer Type
    Maximum Pressure for Gases
    For Use With
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    240 Products

    Bonded Sealing Washers

    Image of Product. Front orientation. Sealing Washers. Bonded Sealing Washers.
    These washers create a stronger seal than metal or rubber alone to lock air and fluid in, while keeping dust and contaminants out. The flexible rubber layer compresses to fill gaps, while the metal backing stops the washer from squeezing through the hole. These washers are a great solution if you have a hole larger than your fastener that you need to seal. Reuse them a handful of times, as long as the material isn't damaged.
    18-8 Stainless Steel and Neoprene—Withstand prolonged exposure to wet and outdoor environments without rusting.
    Galvanized Steel and Neoprene—Combine the strength of steel with the rust resistance of stainless steel. These washers are an economical alternative to 18-8 stainless steel in wet and outdoor environments. However, they typically have a shorter lifespan since the galvanized coating wears off over time.
    Aluminum and Neoprene—These washers are as corrosion resistant as stainless steel but not as strong.
    Temp.
    Range, ° F
    For Screw
    Size
    ID
    OD
    Thk.
    Min.
    Max.
    Color
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel and Neoprene
    No. 2
    0.094"0.188"0.082" to 0.098"-40250Black10000000000000000
    No. 2
    0.094"0.250"0.175" to 0.210"-40250Black500000000000000
    No. 4
    0.120"0.250"0.065" to 0.100"-40250Black10000000000000
    No. 4
    0.125"0.250"0.088" to 0.106"-40250Black50000000000000
    No. 4
    0.125"0.312"0.175" to 0.210"-40250Black500000000000000
    No. 5
    0.140"0.312"0.164" to 0.199"-40250Black500000000000000
    No. 6
    0.150"0.375"0.084" to 0.114"-40250Black10000000000000000
    No. 6
    0.156"0.312"0.167" to 0.202"-40250Black500000000000000
    No. 6
    0.156"0.438"0.096" to 0.115"-40250Black500000000000000
    No. 8
    0.180"0.375"0.084" to 0.114"-40250Black10000000000000000
    No. 8
    0.180"0.500"0.084" to 0.114"-40250Black10000000000000000
    No. 8
    0.188"0.375"0.096" to 0.115"-40250Black500000000000000
    No. 8
    0.188"0.438"0.096" to 0.135"-40250Black500000000000000
    No. 10
    0.200"0.375"0.084" to 0.114"-40250Black10000000000000000
    No. 10
    0.200"0.500"0.084" to 0.114"-40250Black10000000000000000
    No. 10
    0.200"0.625"0.084" to 0.114"-40250Black5000000000000000
    No. 10
    0.200"0.735"0.122" to 0.157"-40250Black100000000000000
    No. 10
    0.200"1.125"0.084" to 0.114"-40250Black50000000000000
    No. 10
    0.203"0.406"0.096" to 0.115"-40250Black500000000000000
    No. 10
    0.250"0.562"0.096" to 0.135"-40250Black300000000000000
    No. 12
    0.240"0.375"0.084" to 0.114"-40250Black10000000000000000
    No. 12
    0.240"0.500"0.084" to 0.114"-40250Black10000000000000000
    No. 12
    0.240"0.562"0.109" to 0.144"-40250Black250000000000000
    No. 12
    0.240"0.625"0.084" to 0.114"-40250Black5000000000000000
    No. 12
    0.240"0.750"0.084" to 0.114"-40250Black250000000000000
    1/4"
    0.260"0.500"0.084" to 0.114"-40250Black10000000000000000
    1/4"
    0.275"0.625"0.084" to 0.114"-40250Black5000000000000000
    1/4"
    0.275"0.750"0.084" to 0.114"-40250Black250000000000000
    1/4"
    0.275"1.000"0.084" to 0.114"-40250Black100000000000000
    1/4"
    0.281"0.500"0.116" to 0.141"-40250Black300000000000000
    1/4"
    0.281"1.000"0.116" to 0.141"-40250Black100000000000000
    1/4"
    0.312"0.750"0.111" to 0.150"-40250Black10000000000000
    5/16"
    0.317"0.625"0.116" to 0.141"-40250Black300000000000000
    5/16"
    0.330"0.625"0.084" to 0.114"-40250Black5000000000000000
    5/16"
    0.330"0.750"0.084" to 0.114"-40250Black250000000000000
    5/16"
    0.330"0.875"0.123" to 0.158"-40250Black100000000000000
    5/16"
    0.330"1.125"0.109" to 0.144"-40250Black50000000000000
    3/8"
    0.400"0.625"0.104" to 0.139"-40250Black2500000000000000
    3/8"
    0.406"1.000"0.116" to 0.141"-40250Black100000000000000
    3/8"
    0.434"0.750"0.084" to 0.114"-40250Black250000000000000
    3/8"
    0.434"0.810"0.113" to 0.148"-40250Black100000000000000
    3/8"
    0.434"1.000"0.084" to 0.114"-40250Black100000000000000
    3/8"
    0.434"1.250"0.110" to 0.145"-40250Black10000000000000
    7/16"
    0.475"0.875"0.114" to 0.149"-40250Black100000000000000
    1/2"
    0.531"1.000"0.116" to 0.141"-40250Black100000000000000
    1/2"
    0.531"1.250"0.150" to 0.182"-40250Black100000000000000
    1/2"
    0.532"1.000"0.084" to 0.114"-40250Black100000000000000
    1/2"
    0.532"1.062"0.103" to 0.138"-40250Black1000000000000000
    1/2"
    0.532"1.375"0.110" to 0.145"-40250Black10000000000000
    9/16"
    0.600"1.125"0.107" to 0.142"-40250Black50000000000000
    5/8"
    0.650"1.188"0.084" to 0.114"-40250Black500000000000000
    5/8"
    0.656"1.250"0.150" to 0.182"-40250Black100000000000000
    3/4"
    0.810"1.500"0.084" to 0.114"-40250Black500000000000000
    3/4"
    0.810"1.750"0.099" to 0.134"-40250Black10000000000000
    7/8"
    0.910"1.500"0.084" to 0.114"-40250Black500000000000000
    1"
    1.040"2.000"0.084" to 0.114"-40250Black10000000000000
    1 1/4"
    1.275"2.500"0.102" to 0.137"-40250Black10000000000000
     
    Galvanized Steel and Neoprene
    No. 4
    0.120"0.250"0.065" to 0.100"-40250Black250000000000000
    No. 4
    0.120"0.310"0.104" to 0.139"-40250Black1000000000000000
    No. 6
    0.150"0.375"0.086" to 0.116"-40250Black1000000000000000
    No. 8
    0.180"0.375"0.086" to 0.116"-40250Black1000000000000000
    No. 8
    0.180"0.434"0.108" to 0.143"-40250Black1000000000000000
    No. 8
    0.180"0.500"0.086" to 0.116"-40250Black1000000000000000
    No. 10
    0.200"0.375"0.086" to 0.116"-40250Black1000000000000000
    No. 10
    0.200"0.500"0.086" to 0.116"-40250Black1000000000000000
    No. 10
    0.200"0.500"0.111" to 0.146"-40250Black1000000000000000
    No. 10
    0.200"0.625"0.086" to 0.116"-40250Black1000000000000000
    No. 10
    0.200"0.735"0.125" to 0.160"-40250Black500000000000000
    No. 10
    0.200"1.125"0.086" to 0.116"-40250Black2500000000000000
    No. 12
    0.240"0.375"0.086" to 0.116"-40250Black1000000000000000
    No. 12
    0.240"0.500"0.086" to 0.116"-40250Black1000000000000000
    No. 12
    0.240"0.625"0.086" to 0.116"-40250Black1000000000000000
    No. 12
    0.240"0.750"0.086" to 0.116"-40250Black10000000000000000
    1/4"
    0.260"0.500"0.086" to 0.116"-40250Black1000000000000000
    1/4"
    0.275"0.625"0.086" to 0.116"-40250Black1000000000000000
    1/4"
    0.275"0.625"0.114" to 0.149"-40250Black1000000000000000
    1/4"
    0.275"0.735"0.121" to 0.156"-40250Black500000000000000
    1/4"
    0.275"0.750"0.086" to 0.116"-40250Black10000000000000000
    1/4"
    0.275"1.000"0.086" to 0.116"-40250Black5000000000000000
    5/16"
    0.330"0.625"0.086" to 0.116"-40250Black1000000000000000
    5/16"
    0.330"0.750"0.086" to 0.116"-40250Black10000000000000000
    5/16"
    0.330"0.875"0.126" to 0.161"-40250Black2500000000000000
    5/16"
    0.330"1.125"0.112" to 0.147"-40250Black100000000000000
    3/8"
    0.400"1.000"0.108" to 0.143"-40250Black250000000000000
    3/8"
    0.400"1.250"0.114" to 0.149"-40250Black100000000000000
    3/8"
    0.434"0.750"0.086" to 0.116"-40250Black10000000000000000
    3/8"
    0.434"0.810"0.116" to 0.151"-40250Black250000000000000
    3/8"
    0.434"1.000"0.086" to 0.116"-40250Black5000000000000000
    7/16"
    0.475"0.875"0.117" to 0.152"-40250Black5000000000000000
    1/2"
    0.532"1.000"0.086" to 0.116"-40250Black5000000000000000
    1/2"
    0.532"1.000"0.104" to 0.139"-40250Black250000000000000
    1/2"
    0.532"1.375"0.114" to 0.149"-40250Black50000000000000
    5/8"
    0.650"1.188"0.086" to 0.116"-40250Black100000000000000
    5/8"
    0.650"1.250"0.108" to 0.143"-40250Black100000000000000
    3/4"
    0.810"1.500"0.086" to 0.116"-40250Black1000000000000000
    7/8"
    0.910"1.500"0.086" to 0.116"-40250Black1000000000000000
    7/8"
    0.910"1.750"0.101" to 0.136"-40250Black50000000000000
    1"
    1.040"2.000"0.086" to 0.116"-40250Black50000000000000
     
    Aluminum and Neoprene
    No. 10
    0.200"0.500"0.090" to 0.120"-40250Black500000000000000
    No. 12
    0.240"0.500"0.090" to 0.120"-40250Black500000000000000
    No. 14
    0.275"0.625"0.090" to 0.120"-40250Black500000000000000
    1/4"
    0.275"0.625"0.119" to 0.154"-40250Black500000000000000
    5/16"
    0.330"0.625"0.110" to 0.145"-40250Black500000000000000
    5/16"
    0.330"0.680"0.119" to 0.154"-40250Black5000000000000000
    3/8"
    0.434"0.735"0.116" to 0.151"-40250Black250000000000000
    3/8"
    0.434"0.810"0.121" to 0.156"-40250Black250000000000000
    1/2"
    0.532"1.000"0.109" to 0.144"-40250Black250000000000000
     

    High-Pressure Bonded Sealing Washers

    Tested to hold up to high pressures, these washers create the strongest seal of all to lock in air and fluid and keep equipment running efficiently. They are often used on flanged connections to prevent leaks in pumps, hydraulic systems, compressors, and other pressurized lines. The flexible rubber or plastic layer compresses to fills gaps, while the metal backing stops the washer from squeezing through the hole.
    For Screw Heads
    Image of ProductInUse. Front orientation. CrossSection view. Sealing Washers. High-Pressure Bonded Sealing Washers, For Screw Heads.
    Image of Product. Front orientation. Sealing Washers. High-Pressure Bonded Sealing Washers, For Screw Heads.
    Fit under screw heads to stop leaks. These washers seal best on screws that aren't threaded all the way up to the head. Reuse them a handful of times, as long as the material isn't damaged.
    Oil-Resistant Zinc-Plated Steel and Buna-N—These washers won't swell or soften when they touch oil, grease, and fuel. However, they will degrade if exposed to synthetic lubricants. They are also are more susceptible to rusting than 18-8 and 316 stainless steel.
    Chemical-Resistant 18-8 Stainless Steel and Fluoroelastomer—These washers resist corrosion better than zinc-plated steel, so they're less likely to rust in wet and outdoor environments. The seal withstands high temperatures and won't degrade when exposed to acids, alcohols, solvents, synthetic lubricants, and harsh detergents.
    Max.
    Pressure, psi
    Temp.
    Range, ° F
    For Screw
    Size
    ID
    OD
    Thk.
    For
    Fluids
    For
    Gases
    Min.
    Max.
    Color
    Pkg.
    Qty.
    Pkg.
    Oil-Resistant Zinc-Plated Steel and Buna-N
    No. 4
    0.102"0.25"0.035" to 0.045"7,000200-10240Black10000000000000000
    No. 6
    0.13"0.385"0.036" to 0.044"10,800200-40225Black1000000000000000
    No. 8
    0.156"0.385"0.036" to 0.044"8,000200-40225Black10000000000000
    No. 10
    0.18"0.443"0.045" to 0.055"6,200200-40225Black10000000000000
    1/4"
    0.24"0.505"0.045" to 0.055"5,000200-40225Black1000000000000000
    5/16"
    0.301"0.603"0.045" to 0.055"3,600200-40225Black1000000000000000
    3/8"
    0.364"0.666"0.045" to 0.055"3,400200-40225Black1000000000000000
    7/16"
    0.427"0.76"0.045" to 0.055"3,600200-40225Black500000000000000
    1/2"
    0.49"0.88"0.045" to 0.055"4,200200-40225Black1000000000000000
    9/16"
    0.552"1.067"0.045" to 0.055"6,600200-30225Black500000000000000
    5/8"
    0.615"1.193"0.045" to 0.055"7,500200-40225Black500000000000000
    3/4"
    0.74"1.322"0.059" to 0.069"5,700200-40225Black500000000000000
    7/8"
    0.864"1.51"0.059" to 0.069"6,000200-30225Black10000000000000
    1"
    0.988"1.76"0.059" to 0.069"7,000200-40225Black10000000000000
    1 1/8"
    1.106"1.885"0.059" to 0.069"4,900200-10240Black10000000000000
    1 1/4"
    1.229"2.01"0.059" to 0.069"4,600200-10240Black10000000000000
    M2
    1.8 mm4.5 mm0.9 mm to 1.1 mm7,300200-10240Black1000000000000000
    M2.5
    2.2 mm5.0 mm0.9 mm to 1.1 mm6,600200-10240Black1000000000000000
    M3
    2.7 mm6.0 mm0.9 mm to 1.1 mm6,400200-10240Black1000000000000000
    M4
    3.7 mm7.0 mm0.9 mm to 1.1 mm5,500200-10240Black1000000000000000
    M5
    4.8 mm9.8 mm0.9 mm to 1.2 mm15,200200-30220Black500000000000000
    M6
    5.8 mm11.3 mm1.1 mm to 1.4 mm12,800200-30220Black500000000000000
    M8
    7.8 mm13.5 mm1.1 mm to 1.4 mm7,900200-30220Black500000000000000
    M10
    9.7 mm15.3 mm1.1 mm to 1.4 mm7,200200-30220Black500000000000000
    M12
    11.7 mm19.3 mm1.1 mm to 1.4 mm7,100200-30220Black500000000000000
    M14
    13.7 mm22.4 mm1.1 mm to 1.4 mm8,000200-30220Black500000000000000
    M16
    15.7 mm27.1 mm1.1 mm to 1.4 mm12,500200-30220Black500000000000000
    M20
    19.6 mm33.3 mm1.5 mm to 1.8 mm4,900200-10240Black500000000000000
    M22
    21.6 mm31.4 mm1.1 mm to 1.4 mm3,700200-10240Black500000000000000
    M24
    23.7 mm43.9 mm1.5 mm to 1.8 mm5,500200-10240Black10000000000000
     
    Chemical-Resistant 18-8 Stainless Steel and Fluoroelastomer
    No. 6
    0.13"0.385"0.035" to 0.045"4,9002000390Black1000000000000000
    No. 8
    0.156"0.385"0.035" to 0.045"4,4002000390Black1000000000000000
    No. 10
    0.18"0.443"0.042" to 0.052"4,4002000390Black500000000000000
    1/4"
    0.24"0.505"0.045" to 0.055"3,9002000390Black500000000000000
    5/16"
    0.301"0.603"0.045" to 0.055"3,7002000390Black500000000000000
    3/8"
    0.364"0.666"0.045" to 0.055"3,4002000390Black500000000000000
    7/16"
    0.427"0.76"0.045" to 0.055"3,2002000390Black500000000000000
    1/2"
    0.49"0.88"0.045" to 0.055"3,3002000390Black10000000000000
    9/16"
    0.552"1.067"0.045" to 0.055"3,6002000390Black10000000000000
    5/8"
    0.615"1.193"0.045" to 0.055"3,6002000390Black100000000000000
    3/4"
    0.74"1.322"0.059" to 0.069"3,3002000390Black100000000000000
    7/8"
    0.864"1.51"0.059" to 0.069"3,2002000390Black100000000000000
    1"
    0.988"1.76"0.059" to 0.069"3,2002000390Black100000000000000
    M5
    4.8 mm9.8 mm0.9 mm to 1.1 mm3,7002000390Black1000000000000000
    M6
    5.8 mm11.3 mm1.1 mm to 1.4 mm3,6002000390Black1000000000000000
    M8
    7.8 mm13.5 mm1.1 mm to 1.4 mm3,1002000390Black500000000000000
    M10
    9.7 mm15.3 mm1.1 mm to 1.4 mm2,7002000390Black500000000000000
    M12
    11.7 mm19.3 mm1.1 mm to 1.4 mm2,9002000390Black500000000000000
    M14
    13.6 mm22.3 mm1.1 mm to 1.4 mm2,9002000390Black10000000000000
    M16
    15.6 mm27.1 mm1.1 mm to 1.4 mm3,1002000390Black10000000000000
    M20
    19.6 mm33.3 mm1.5 mm to 1.8 mm3,0002000390Black100000000000000
     
    For Nuts
    Image of ProductInUse. Front orientation. CrossSection view. Sealing Washers. High-Pressure Bonded Sealing Washers, For Nuts.
    Image of Product. Front orientation. Sealing Washers. High-Pressure Bonded Sealing Washers, For Nuts.
    Commonly used under nuts, these washers wedge into threads to prevent liquids or gases from trickling along the length of the screw. Reuse them a handful of times, as long as the material isn't damaged.
    Oil-Resistant Zinc-Plated Steel and Buna-N—These washers won't swell or soften when they touch oil, grease, and fuel. However, they will degrade if exposed to synthetic lubricants. They are also are more susceptible to rusting than 18-8 and 316 stainless steel.
    Max.
    Pressure
    Temp.
    Range, ° F
    For Screw
    Size
    ID
    OD
    Thk.
    For Fluids,
    psi
    For
    Gases
    Min.
    Max.
    Color
    Pkg.
    Qty.
    Pkg.
    Oil-Resistant Zinc-Plated Steel and Buna-N
    No. 6
    0.141"0.406"0.045" to 0.055"2,000Not Rated-30220Black5000000000000000
    No. 8
    0.167"0.406"0.045" to 0.055"2,000Not Rated-30220Black500000000000000
    No. 10
    0.194"0.469"0.045" to 0.055"2,000Not Rated-30220Black500000000000000
    1/4"
    0.255"0.562"0.045" to 0.055"5,000Not Rated-30220Black500000000000000
    5/16"
    0.319"0.687"0.059" to 0.069"5,000Not Rated-30220Black500000000000000
    3/8"
    0.383"0.750"0.059" to 0.069"5,000Not Rated-30220Black500000000000000
    7/16"
    0.447"0.906"0.073" to 0.083"5,000Not Rated-30220Black500000000000000
    1/2"
    0.510"1.000"0.073" to 0.083"5,000Not Rated-30220Black500000000000000
    5/8"
    0.638"1.187"0.089" to 0.099"5,000Not Rated-30220Black500000000000000
    3/4"
    0.765"1.375"0.104" to 0.114"5,000Not Rated-30220Black10000000000000
    1"
    1.020"1.750"0.115" to 0.125"5,000Not Rated-30220Black100000000000000
     
    For Screw Heads and Nuts
    Image of ProductInUse. Front orientation. CrossSection view. Sealing Washers. High-Pressure Bonded Sealing Washers, For Screw Heads and Nuts.
    Image of Product. Front orientation. Sealing Washers. High-Pressure Bonded Sealing Washers, For Screw Heads and Nuts.
    Install these washers under screw heads and nuts. When compressed, the PVC sealant squeezes into every crevice, creating an impervious 360° seal that stops liquids or gases from trickling along the length of the screw. These washers are not reusable.
    18-8 Stainless Steel and PVC—The PVC sealant resists acids, alcohols, solvents, and detergents. However, the metal is more likely to rust than 316 stainless steel.
    Chemical-Resistant 316 Stainless Steel and PVC—Every part of these washers resists acids, alcohols, solvents, and other aggressive substances. They are commonly used in harsh environments, such chemical processing plants.
    Max.
    Pressure, psi
    Temp.
    Range, ° F
    For Screw
    Size
    ID
    OD
    Thk.
    For
    Fluids
    For
    Gases
    Min.
    Max.
    Color
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel and PVC
    No. 6
    0.148"0.495"0.06" to 0.07"8,5008,500-60270Black25000000000000000
    No. 8
    0.175"0.495"0.06" to 0.07"8,5008,500-60270Black2500000000000000
    No. 10
    0.205"0.56"0.06" to 0.07"8,5008,500-60270Black2500000000000000
    1/4"
    0.255"0.625"0.068" to 0.078"8,5008,500-60270Black100000000000000
    5/16"
    0.315"0.685"0.072" to 0.082"8,5008,500-60270Black100000000000000
    3/8"
    0.385"0.81"0.077" to 0.087"8,5008,500-60270Black100000000000000
    7/16"
    0.445"0.89"0.085" to 0.095"8,5008,500-60270Black50000000000000
    1/2"
    0.51"0.99"0.085" to 0.095"8,5008,500-60270Black50000000000000
     
    Chemical-Resistant 316 Stainless Steel and PVC
    No. 4
    0.124"0.396"0.05" to 0.06"8,5008,500-60270Black200000000000000
    No. 6
    0.148"0.495"0.06" to 0.07"8,5008,500-60270Black200000000000000
    No. 8
    0.175"0.495"0.06" to 0.07"8,5008,500-60270Black200000000000000
    No. 10
    0.205"0.56"0.06" to 0.07"8,5008,500-60270Black2000000000000000
    1/4"
    0.255"0.625"0.068" to 0.078"8,5008,500-60270Black150000000000000
    5/16"
    0.315"0.685"0.072" to 0.082"8,5008,500-60270Black150000000000000
    3/8"
    0.385"0.81"0.077" to 0.087"8,5008,500-60270Black100000000000000
    1/2"
    0.51"0.99"0.085" to 0.095"8,5008,500-60270Black500000000000000
    5/8"
    0.639"1.135"0.085" to 0.095"8,5008,500-60270Black10000000000000
    3/4"
    0.77"1.28"0.105" to 0.115"8,5008,500-60270Black10000000000000
    7/8"
    0.893"1.44"0.105" to 0.115"8,5008,500-60270Black10000000000000
    1"
    1.018"1.6"0.105" to 0.115"8,5008,500-60270Black10000000000000
     

    Washdown Bonded Sealing Washers

    Image of Product. Bottom orientation. Sealing Washers. Washdown Bonded Sealing Washers.
    Maintain the washdown rating of your enclosure, even after drilling holes in it. These washers protect against high-volume jets of water, as well as dirt, ice, oil, and coolant. The flexible rubber layer compresses to fill gaps, while the metal backing stops the washer from squeezing through the hole. Reuse these washers a handful of times, as long as the material isn't damaged.
    18-8 Stainless Steel and EPDM—The best choice for outdoor environments, these washers withstand long-term exposure to sunlight, rain, and ozone.
    High-Temperature 18-8 Stainless Steel and Silicone—These washers resist freezing and scorching temperatures without deforming or losing strength.
    Max.
    Pressure, psi
    Temp.
    Range, ° F
    For Screw
    Size
    ID
    OD
    Thk.
    For
    Fluids
    For
    Gases
    Min.
    Max.
    Color
    For Enclosure Rating
    Each
    18-8 Stainless Steel and EPDM
    No. 10
    0.170"0.496"0.078" to 0.126"Not RatedNot Rated-30200BlackNEMA 3S, NEMA 4X, NEMA 1200000000000000
    1/4"
    0.180"0.496"0.078" to 0.126"Not RatedNot Rated-30200BlackNEMA 3S, NEMA 4X, NEMA 120000000000000
    5/16"
    0.275"0.625"0.085" to 0.133"Not RatedNot Rated-30200BlackNEMA 3S, NEMA 4X, NEMA 120000000000000
    3/8"
    0.325"0.725"0.095" to 0.143"Not RatedNot Rated-30200BlackNEMA 3S, NEMA 4X, NEMA 120000000000000
     
    High-Temperature 18-8 Stainless Steel and Silicone
    No. 6
    0.123"0.55"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    No. 6
    0.123"1"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    No. 8
    0.175"0.55"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    No. 8
    0.175"1"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    No. 8
    0.175"1.5"0.047" to 0.109"100100-100400GreenIP66, IP6800000000000000
    No. 10
    0.2"0.55"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    No. 10
    0.2"1"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    1/4"
    0.265"0.75"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    1/4"
    0.265"1"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    1/4"
    0.265"1.5"0.047" to 0.109"100100-100400GreenIP66, IP6800000000000000
    5/16"
    0.325"0.75"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    5/16"
    0.325"1"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    5/16"
    0.325"1.5"0.047" to 0.109"100100-100400GreenIP66, IP6800000000000000
    3/8"
    0.385"0.75"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    3/8"
    0.385"1"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    3/8"
    0.385"1.5"0.047" to 0.109"100100-100400GreenIP66, IP6800000000000000
    7/16"
    0.422"1"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    7/16"
    0.422"1.5"0.047" to 0.109"100100-100400GreenIP66, IP6800000000000000
    1/2"
    0.485"1"0.047" to 0.109"100100-100400GreenIP66, IP680000000000000
    1/2"
    0.485"1.5"0.047" to 0.109"100100-100400GreenIP66, IP6800000000000000
    M3
    2.9 mm14 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M3
    2.9 mm25.4 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M4
    3.9 mm14 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M4
    3.9 mm25.4 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M5
    4.9 mm14 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M5
    4.9 mm19.1 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M5
    4.9 mm25.4 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M6
    5.9 mm19.1 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M6
    5.9 mm25.4 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M8
    7.8 mm19.1 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M8
    7.8 mm25.4 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M10
    9.8 mm25.4 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
    M12
    11.8 mm25.4 mm2 mm to 2.1 mm100100-100400RedIP66, IP680000000000000
     

    Sanitary Bonded Sealing Washers

    Image of Product. Front orientation. Sealing Washers. Sanitary Bonded Sealing Washers.
    Eliminate nooks and crannies under the nut or screw head where dirt and bacteria could collect. Unlike other bonded washers, the metal ring nests inside the rubber layer, creating a smooth outer surface that's easy to clean. These washers stand up to harsh cleaners and detergents and won't corrode from frequent washdowns. They're commonly found on equipment in food and pharmaceutical processing plants to prevent leaks and block out contaminants. Reuse them a handful of times, as long as the material isn't damaged.
    316 Stainless Steel and EPDM—These washers are highly resistant to tearing, scuffs, and scrapes. They are more economical than Fluoroprene Fluoroelastomer, however, they aren't as heat resistant.
    Chemical-Resistant 316 Stainless Steel and Fluoroprene Fluoroelastomer—These washers withstand higher temperatures than EPDM, so you can sterilize them with steam. They also resist more chemicals, such as oil, solvents, and acids.
    Temp.
    Range, ° F
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk.,
    mm
    Min.
    Max.
    Color
    Food Industry Std.
    Each
    316 Stainless Steel and EPDM
    M4
    4.1009.7001.000-40300Black3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, NSF/ANSI 51000000000000000
    M5
    5.10010.7001.000-40300Black3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, NSF/ANSI 5100000000000000
    M6
    6.10013.1001.000-40300Black3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, NSF/ANSI 5100000000000000
    M8
    8.10016.9001.000-40300Black3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, NSF/ANSI 5100000000000000
    M10
    10.10021.2001.500-40300Black3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, NSF/ANSI 5100000000000000
    M12
    12.10025.5001.500-40300Black3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, NSF/ANSI 5100000000000000
    M16
    16.10033.9001.500-40300Black3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, NSF/ANSI 5100000000000000
     
    Chemical-Resistant 316 Stainless Steel and Fluoroprene Fluoroelastomer
    M4
    4.1009.7001.0005390Blue3-A Certified 18-03, FDA Compliant 21 CFR 177.260000000000000000
    M5
    5.10010.7001.0005390Blue3-A Certified 18-03, FDA Compliant 21 CFR 177.260000000000000000
    M6
    6.10013.1001.0005390Blue3-A Certified 18-03, FDA Compliant 21 CFR 177.260000000000000000
    M8
    8.10016.9001.0005390Blue3-A Certified 18-03, FDA Compliant 21 CFR 177.260000000000000000
    M10
    10.10021.2001.5005390Blue3-A Certified 18-03, FDA Compliant 21 CFR 177.260000000000000000
    M12
    12.10025.5001.5005390Blue3-A Certified 18-03, FDA Compliant 21 CFR 177.260000000000000000
    M16
    16.10033.9001.5005390Blue3-A Certified 18-03, FDA Compliant 21 CFR 177.260000000000000000
     
    back to top