Steel Female-Threaded Anchors for Concrete
A zinc plating provides corrosion resistance in wet environments. Also known as drop-in anchors, these are often used for overhead applications because the anchor's internal plug expands in four directions to hold the anchor firmly inside the hole before inserting a threaded rod or bolt. To install, place the anchor into the hole, insert the required installation tool (sold separately) into the anchor, and drive with a hammer until the thicker portion of the tool makes contact with the anchor. Pull-out strength and shear strength values are 25% of the ultimate values for normal-weight concrete.
Anchors can be installed below the base of the surface as well as flush with the surface. Use those with a coil thread to support temporary concrete formwork. Their threads are shallow and widely spaced for quick threading with a compatible rod or bolt.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Drill Bit Size | Min. Installation Dp. | Dia. | Thread Dp. | Pull-Out | Shear | Tested In | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Carbon Steel | ||||||||||||
Anchor with Coil Threads | ||||||||||||
3/4"-4 1/2 | 3 3/16" | 1" | 3 3/16" | 1" | 1 3/8" | 2,350 | 3,920 | 4,000 psi Concrete | FM Approved, UL Listed | 1 | 000000000 | 000000 |
Quick-Clamping Coil-Threaded Rods, Screws, and Nuts
Combine fast-threading components to build a clamping assembly. The coil-style threads are shallow and widely spaced for quick threading.
Flange nuts have a large bearing surface to cover holes and resist vibration.
Wing nuts can be fastened by hand.
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Direction | Threading | Lg. | Material | Tensile Strength, psi | Each | |
3/4"-4 1/2 | Right Hand | Fully Threaded | 6 ft. | Steel | 117,000 | 000000000 | 000000 |
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Direction | Wd. | Ht. | Material | Tensile Strength | Each | |
3/4"-4 1/2 | Right Hand | 1 1/8" | 5/8" | Steel | Not Rated | 000000000 | 00000 |
Thread | Flange | Mounting Holes | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Direction | Wd. | Ht. | Dia. | Thick. | Material | Tensile Strength | Number of | Dia. | Ctr.-to-Ctr. | Mounting Fasteners Included | Each | |
3/4"-4 1/2 | Right Hand | 1 3/16" | 1 5/8" | 4" | 9/32" | Iron | Not Rated | 4 | 5/16" | 2 1/16" | No | 000000000 | 000000 |
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Direction | Wd. | Ht. | Base Dia. | Material | Tensile Strength | Each | |
3/4"-4 1/2 | Right Hand | 6" | 2 1/2" | 1 3/4" | Iron | Not Rated | 000000000 | 000000 |