Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.

Use these wrenches for medium-volume production, general maintenance, and construction applications.

Use these tools for general shop applications.

The 20° offset head provides clearance when reaching over obstructions.

No need to pull the socket off the tool—push a button to release.

Turn sockets in the most confined spaces.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Also known as rotator ratchets, these wrenches let you rotate the grip to tighten a socket. They're useful when you don't have the space to swing the handle side to side.

No need to pull the socket off the tool—push a button to release.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

Apply more torque than your wrench can deliver on its own. Use a multiplier with a torque wrench to ensure you do not exceed the maximum input torque.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Measure with an accuracy of ±7%.

No need to pull the socket off the tool—push a button to release.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Pivot the head to access fasteners in tight spots.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Designed to fit inside strut channel, these sockets make it easier to mount the channel than using an extension or additional tools.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.

Slip these slotted sockets onto wing nuts to tighten or loosen them with more force than fingers can apply.

Tighten and loosen fasteners with an external Torx drive.

These sockets fit the nuts found on water and gas valves.

Attach one of these heads to your square-drive ratchet or torque wrench to extend its reach or to access spaces with limited vertical clearance.

Also known as pipe plug sockets, these sockets have a square shape that provides the best possible grip on square fasteners and prevents rounding.

Pivot the head to access fasteners from an angle.

Designed for use with stainless steel fasteners, these sockets are more corrosion resistant than steel sockets and less likely to flake.

With more than double the clearance of standard sockets, these sockets access nuts on extra-long bolts.

Eliminate the risk of your socket falling while reaching into your workspace with these flex sockets that have an integrated extension.

Pair these sockets with a bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt which can pass through the socket and the head of the wrench.

The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

Turn square-drive fasteners in several sizes with these socket sets.

Pivot the head to access fasteners from an angle.

Tighten or loosen nuts and bolts without damaging the finish.

The square shape provides the best possible grip on square fasteners and prevents rounding.

The slotted shape of these sockets fits over wing nuts to tighten and loosen them with more force than you can by hand.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Tighten or loosen nuts and bolts without damaging the finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Pivot the head to access fasteners from an angle.

Extra length allows access to fasteners on long bolts.

A magnet holds the fastener securely enough to drive self-tapping screws.

Move from lug nut to lug nut with the speed of a racecar pit crew. Up to five standard 6-point lug nuts stack up in the shank of these sockets, so you don’t have to stop to take the lug nuts out of the socket.

Reach nuts obstructed by a fluid line or other barrier with the wrench heads in these sets.

Connect one of the heads in these sets to a socket extension to reach an obstructed fastener, then turn the fastener without removing and repositioning the wrench head.

These sockets are designed to tolerate continuous use with power tools and impact tools in high-volume production and assembly.

Turn 90° elbow fittings that are in tight spots with the sockets in these sets.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

Access 6-point nuts and bolts in tight and awkward spaces—the heads on these sockets pivot.

Two spring-loaded balls inside these sockets firmly hold nuts and bolts in place as you turn them, including nonmagnetic fasteners like stainless steel screws.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

With more than double the clearance of standard sockets, the sockets in these sets access nuts on extra-long bolts.

Suitable for occasional maintenance work, these sets are imported.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

These wrenches have one pivoting socket end and one open end.

Pivot the socket end to access hard-to-reach fasteners.

The handles are covered in plastic for a comfortable grip.

Also known as alligator wrenches and water-meter nut wrenches, the V-shaped head fits multiple hex fastener sizes.

When turning fasteners in small spaces, these short wrenches fit where others can't.

Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.

The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These lightweight tools are also known as AN (Army-Navy) wrenches.

One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

When working in tight spaces, these short wrenches fit where others can't.

Pivot the box end for access to fasteners in tight spots.

Quickly find the wrenches you're looking for with these brightly colored sets.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

Suitable for occasional maintenance work, these sets are imported.

Suitable for occasional maintenance work, these sets are imported.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.

When working in tight spaces, these short wrenches fit where others can't.

A lever reverses the ratchet direction.

A lever reverses the ratchet direction.

Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.

The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.

Made of stainless steel, these wrenches have excellent corrosion resistance.

The slim heads fit into tight spaces and around thin fasteners.

The heads are offset to provide clearance for reaching over obstructions.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.