Extra-long bits allow access to hard-to-reach fasteners.

When vertical space is tight or you need an extra twist on your socket, use these dual drive hex bit sockets. They work with a standard square drive tool and a box or open end wrench.

An extra-long Phillips bit allows these sockets to reach far-away fasteners. Use them where standard or stubby sockets can’t reach.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as pin-in-hex or pin-in-socket bits.

An opening at the tip of these sockets fits around the security pin, allowing you to drive tamper-resistant Torx Plus screws.

These sockets are made to withstand the high torque and force of impact tools.

Extra-long bits help you access hard-to-reach fasteners.

The short bit on these sockets fits in spaces where height clearance is limited.

Keep a convenient variety of drive styles and sizes of bit sockets on hand.

Extra-long bits allow access to hard-to-reach fasteners.

The short bit on these sockets fits in spaces where height clearance is limited.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

Pivot the head to access fasteners from an angle.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

When vertical space is tight or you need an extra twist on your socket, use one of the dual-drive Phillips bit sockets in this set.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Extra-long bits help you access hard-to-reach fasteners.

The Torx bit sockets in these sets fasten Torx screws often used in vehicles, bicycles, and electronics.

Strong and durable, these multipurpose bits are for use with bit screwdrivers.

A retaining ring at the tip grips inside the recess to ensure screws won't slip off the bit.

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

Bits have a different size at each end.

These bits have an offset cross shape. They’re also known as ACR® bits.

An opening at the tip accommodates the pin in the recess of tamper-resistant pentalobe and tamper-resistant Torx Plus screws.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

Bits have a different size at each end.

Bits have a different size at each end. An opening at the tips accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

Drive screws with both ends of these bits. Use with hand drivers.

Thread these bits directly into your driving tool for minimal wobble in assembly applications.

The six rounded points fit the star-shaped recess of Torx-Plus screws. These bits have a similar profile to Torx but are not recommended for use with standard Torx screws.

The toughest bits available, these withstand the shock and twisting force of impact drivers. Designed for screws with a square recess in the head, they are also known as Robertson bits.

Bits have a different size at each end.

Strong and durable, these multipurpose bits are for use with bit screwdrivers.

These bits provide a secure grip on the Phillips/slotted combination-drive screws in electrical equipment.

Also known as Polydrive bits.

The tip is shaped like an eight-pointed star.

Use with screws that have two drilled holes.

An opening at the tip accommodates the pin in the recess of tamper-resistant Phillips screws. These are also known as pin-in-head Phillips bits.

An opening at the tip accommodates the pin in the recess of tamper-resistant square screws.

Turn the screws found in Apple devices.

A three-winged tip fits triangular slotted screw recesses.

Also known as Reed and Prince bits.

Grip the indentations on the head of tri-groove fasteners.

Turn two drive styles with one reversible bit. Remove and replace to change the tip.

While screws with a Square/Phillips combination drive can be turned with either a Square or Phillips bit, these make the best contact so you can apply high torque without slipping and stripping the recess. They are also known as Quadrex bits.

Assortments contain bits with multiple drive styles.

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

The six rounded points fit the star-shaped recess of Torx-Plus screws. These bits have a similar profile to Torx but are not recommended for use with standard Torx screws.

Also known as Bristol bits, these have a knurled-end shank that allows finger tightening. They can also be used with the included screwdriver.

An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.

Designed for the fasteners used in electronics assembly, the tip of these bits has slightly sharper corners than Phillips style.

Grip the indentations on the head of tri-groove fasteners.

Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.

Insert a bit into the shaft and a magnet holds it in place.

Operate these tools like a standard bit driver and access hard-reach fasteners with the offset head. Insert a bit and a magnet holds it in place.

Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. A magnet at the end of the shaft holds bits in place.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet EN 60900 and IEC 60900.

An insulated handle and shafts protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900.

A cushioned grip over a plastic core adds comfort and some slip resistance.

When working in tight spaces, these short drivers fit where others can't. They have a cushioned grip over a plastic core for comfort and some slip resistance.

Sets include an assortment of drivers with a suede-like textured handle that provides a firm grip, even for oily hands.

When working in tight spaces, these short drivers fit where others can't.

These standard-length drivers are found in every tool box.

Even oily hands can keep a firm grip on the suede-like textured handle.

Use the stud on the handle to bend and loop solid wire for making connections to outlets and switches.

Bright-colored handles make these tools stand out so they're less likely to be misplaced.

A holding mechanism at the tip of the tool ensures the screw won’t slip off.

These assorted drivers have bright-colored handles to stand out so they're less likely to be misplaced.

Sets include an assortment of drivers with a straight slotted tip that fills the screw slot better than the tapered tip on standard screwdrivers for more torque and less slippage. They're also known as hollow-tip or parallel ground screwdrivers.

The assorted drivers in these sets have a holding mechanism at the tip that ensures the screw won’t slip off.

Also known as hollow-tip or parallel ground screwdrivers, the straight slotted tip fills the screw slot better than the tapered tip on standard screwdrivers for more torque and less slippage.

For use in applications where a magnetized tool can cause damage, these screwdrivers have a titanium shaft.

Sets include an assortment of stainless steel drivers, which protect stainless steel screws. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These drivers eliminate that risk.

The handle on these assorted drivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They're also known as ESD-safe screwdrivers.

Sets include assorted drivers with an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards.

Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

The tip can be replaced when it becomes worn. These tools have a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the driver with your fingertips.

A magnetized tip holds the screw in place. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

The assorted drivers in these sets have an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

Use these ceramic-tipped screwdrivers for adjusting sensitive electronic components such as capacitors and resistors. They're completely nonconductive and nonmagnetic so there's no risk of short-circuiting or creating magnetic interference. Press the rotating end cap with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter.