About Torque Tools
More
Replacement Bits for Hex Bit Sockets
Switch out worn or damaged bits instead of replacing your entire bit socket. No need for set screws or roll pins to keep these bits in place—they have nylon pellets at their base that compress within the socket for a snug fit. Tap them into hex bit sockets with a hammer. They flex slightly to withstand the high torque and force of impact tools. They can also be used with hand-drive tools.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Material | Each | |
Inch | ||||
|---|---|---|---|---|
| 0.050" | 2" | Black-Oxide Steel | 0000000 | 00000 |
Hex Bits
These multipurpose bits are strong and durable.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
Bit Assortments
These assortments contain general-purpose bits.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
| No. of Pieces | Components Included | Bits Included | Each | |
1/4" Hex Shank Size for Power Tools—Steel | ||||
|---|---|---|---|---|
| 50 | 50 Bits | Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea. Hex (Inch): 5/32" (2" O'all Lg.)—2 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm 6 mm, 8 mm (2" O'all Lg.)—1 ea. Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea. Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16" (2" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3 No. 4 (2" O'all Lg.)—1 ea. Torx: T25 (2" O'all Lg.)—2 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27 T30, T40 (2" O'all Lg.)—1 ea. | 000000 | 0000000 |
Precise-Control Bit Assortments
Bits have a knurled shank that allows finger tightening. For more torque, use with the included ratcheting bit screwdriver. They will not fit in standard bit screwdrivers.
| No. of Pieces | Components Included | Bits Included | Adapters Included | Extensions Included | Drive Tools Included | Material | Each | |
1/4" Knurled-End Hex | ||||||||
|---|---|---|---|---|---|---|---|---|
| 27 | 23 Bits 1 Adapter 1 Extension 2 Drive Tools | Phillips: No. 1, No. 2 (1 3/8" O'all Lg.) Slotted: 3/16", 1/4", 3/8" (1 1/4" O'all Lg.) Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 5/32", 3/16", 7/32", 1/4" (1 1/4" O'all Lg.) Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm (1 1/4" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter | 3 1/2" Lg. Extension | 3 3/4" Lg. Tight-Clearance Ratcheting Bit Screwdriver Screwdriver Handle | Steel | 0000000 | 000000 |
| Drive Size | Each | |
Slotted  | ||
|---|---|---|
| 3/16" | 0000000 | 00000 |
| 1/4" | 0000000 | 0000 |
| 3/8" | 0000000 | 0000 |
Phillips | ||
| No. 1 | 0000000 | 0000 |
| No. 2 | 0000000 | 0000 |
Hex | ||
| 0.050" | 0000000 | 0000 |
| 1/16" | 0000000 | 0000 |
| 5/64" | 0000000 | 0000 |
| 3/32" | 0000000 | 0000 |
| 7/64" | 0000000 | 0000 |
| 1/8" | 0000000 | 0000 |
| 9/64" | 0000000 | 0000 |
| 5/32" | 0000000 | 0000 |
| 3/16" | 0000000 | 0000 |
| 7/32" | 0000000 | 0000 |
| 1/4" | 0000000 | 0000 |
| 1.5 mm | 0000000 | 0000 |
| 2 mm | 0000000 | 0000 |
| 2.5 mm | 0000000 | 0000 |
| 3 mm | 0000000 | 0000 |
| 4 mm | 0000000 | 0000 |
| 5 mm | 0000000 | 0000 |
| 6 mm | 0000000 | 0000 |
| For Bit Hex Shank Size | Overall Lg. | Material | Each | |
Knurled-End Hex | ||||
|---|---|---|---|---|
| 1/4" | 3 3/4" | Stainless Steel | 0000000 | 00000 |
Compact Changeable-Shaft Ball-End Screwdriver Sets
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas. A scaled-down version of standard changeable-shaft screwdrivers, these tools are shorter, slimmer, and easy to take with you. Remove and replace the shaft to use a different tip size. Sets include one handle, one extension, and multiple shafts.
| No. of Pieces | Components Included | Sizes Included | Drive Size | Extensions Included | O'all Lg. | Max. Access Angle | Material | Finish | Handle Material | Container Type | Each | |
| 11 | 9 Shafts 1 Extension 1 Screwdriver Handle | Hex: 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" | 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" | 4" Lg. Extension | 7 1/2" | 20° | Steel | Black Oxide | Plastic | Plastic Case | 0000000 | 0000000 |
Compact Changeable-Shaft Screwdriver Sets
A scaled-down version of standard changeable-shaft screwdrivers, these tools are shorter, slimmer, and easy to take with you. Remove and replace the shaft to use a different tip size. Sets include one handle, one extension, and multiple shafts.
Ball-end shafts allow angled entry to turn screws in hard-to-reach areas when you don't have exact alignment between the fastener and the tool.
| Number of Pieces | Components Included | Sizes Included | Extensions Included | Overall Lg. | Material | Finish | Handle Material | Container Type | Drive Size | Each | |
| 11 | 9 Shafts 1 Extension 1 Screwdriver Handle | Hex: 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" | 4" Lg. Extension | 7 1/2" | Steel | Black Oxide | Plastic | Plastic Case | 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" | 0000000 | 000000 |
Ultra-Grip Screwdrivers
These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Finish | Handle Material | Each | |
| 0.050" | 4 1/8" | 2 3/8" | 1/16" | Steel | Black Phosphate Coated | Plastic | 0000000 | 00000 |
Compact Screwdriver Sets
A scaled-down version of standard screwdrivers, these tools are shorter, slimmer, and easy to take with you. Sets include a secondary handle that slips over the attached handle for greater torque and a more comfortable grip.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
| 9 | 0.028" Hex Screwdriver—3 1/2" O'all Lg. 0.035" Hex Screwdriver—3 1/2" O'all Lg. 0.050" Hex Screwdriver—3 1/2" O'all Lg. 1/16" Hex Screwdriver—3 1/2" O'all Lg. 5/64" Hex Screwdriver—3 1/2" O'all Lg. 3/32" Hex Screwdriver—3 1/2" O'all Lg. 7/64" Hex Screwdriver—3 1/2" O'all Lg. 1/8" Hex Screwdriver—3 1/2" O'all Lg. Secondary Screwdriver Handle | Steel | Black Oxide | Plastic | Plastic Case | 0000000 | 000000 |
Ultra-Grip Screwdriver Sets
Sets include an assortment of screwdrivers with soft, contoured handles that provide comfort and the best possible grip for achieving maximum torque.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
| 6 | 0.050" Hex Screwdriver—4 13/16" O'all Lg. 1/16" Hex Screwdriver—5" O'all Lg. 5/64" Hex Screwdriver—5" O'all Lg. 3/32" Hex Screwdriver—6 1/4" O'all Lg. 1/8" Hex Screwdriver—6 1/2" O'all Lg. 5/32" Hex Screwdriver—8" O'all Lg. | Steel | Black Phosphate Coated | Plastic | Plastic Pouch | 0000000 | 000000 |
| 11 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 3/4" O'all Lg. 5/64" Hex Screwdriver—4 7/8" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 3/8" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 3/4" O'all Lg. 5/32" Hex Screwdriver—8" O'all Lg. 3/16" Hex Screwdriver—8 1/4" O'all Lg. 7/32" Hex Screwdriver—9 1/4" O'all Lg. 1/4" Hex Screwdriver—9 1/2" O'all Lg. | Steel | Black Phosphate Coated | Rubber | Plastic Pouch | 0000000 | 00000 |
Ball-End Screwdrivers
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas. These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
For technical drawings and 3-D models, click on a part number.
Ball-End Screwdriver Sets
The assorted screwdrivers in these sets have a ball end that allows angled entry to turn screws in hard-to-reach areas. A contoured ultra-grip handle provides comfort and the best possible grip for achieving maximum torque.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Max. Access Angle | Material | Finish | Handle Material | Container Type | Each | |
| 8 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 3/4" O'all Lg. 5/64" Hex Screwdriver—4 13/16" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 5/16" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 13/16" O'all Lg. 5/32" Hex Screwdriver—7 15/16" O'all Lg. | 25° | Steel | Black Phosphate Coated | Plastic | Plastic Pouch | 0000000 | 000000 |
| 13 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 3/4" O'all Lg. 5/64" Hex Screwdriver—4 13/16" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 5/16" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 13/16" O'all Lg. 5/32" Hex Screwdriver—7 15/16" O'all Lg. 3/16" Hex Screwdriver—8" O'all Lg. 7/32" Hex Screwdriver—9" O'all Lg. 1/4" Hex Screwdriver—9 3/4" O'all Lg. 5/16" Hex Screwdriver—10 1/2" O'all Lg. 3/8" Hex Screwdriver—11 1/4" O'all Lg. | 25° | Steel | Black Phosphate Coated | Plastic | Plastic Pouch | 0000000 | 00000 |
Screw-Holding Screwdriver Sets
These assorted drivers have a holding mechanism at the tip that grips inside the recess and ensures the screw won’t slip off. The contoured ultra-grip handle provides comfort and the best possible grip for achieving maximum torque.
Ball-tip screwdrivers allow angled entry into the screw head when you don't have exact alignment between the fastener and the tool.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Max. Access Angle | Screw-Holding Mechanism | Material | Handle Material | Tip Style | Container Type | Each | |
| 13 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 3/4" O'all Lg. 5/64" Hex Screwdriver—4 7/8" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 3/8" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 7/8" O'all Lg. 5/32" Hex Screwdriver—8" O'all Lg. 3/16" Hex Screwdriver—8" O'all Lg. 7/32" Hex Screwdriver—9" O'all Lg. 1/4" Hex Screwdriver—10" O'all Lg. 5/16" Hex Screwdriver—10 1/2" O'all Lg. 3/8" Hex Screwdriver—11 1/2" O'all Lg. | 20° | Ball Detent | Steel | Rubber | Ball | Plastic Pouch | 000000 | 000000 |
Ball-End Driver Shafts
Create your own tool by attaching these shafts to a handle, or use with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Max. Access Angle | Material | Finish | Each | |
Hex | ||||||
|---|---|---|---|---|---|---|
| 0.050" | 3 7/16" | 25° | Steel | Black Phosphate Coated | 0000000 | 00000 |
Ball-End Driver Shaft Sets
These assorted shafts attach to a handle or can be used with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Max. Access Angle | Material | Finish | Container Type | Each | |
| 12 | 0.050" Hex Driver Shaft (3 7/16" O'all Lg.) 1/16" Hex Driver Shaft (3 1/2" O'all Lg.) 5/64" Hex Driver Shaft (3 5/8" O'all Lg.) 3/32" Hex Driver Shaft (3 13/16" O'all Lg.) 7/64" Hex Driver Shaft (4 5/16" O'all Lg.) 1/8" Hex Driver Shaft (4 1/2" O'all Lg.) 9/64" Hex Driver Shaft (4 13/16" O'all Lg.) 5/32" Hex Driver Shaft (5 1/8" O'all Lg.) 3/16" Hex Driver Shaft (5 1/2" O'all Lg.) 7/32" Hex Driver Shaft (5 15/16" O'all Lg.) 1/4" Hex Driver Shaft (6 3/4" O'all Lg.) 5/16" Hex Driver Shaft (7 5/16" O'all Lg.) | 25° | Steel | Black Phosphate Coated | Plastic Pouch | 0000000 | 000000 |
Precise-Control Screwdrivers
Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. These tools are also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Finish | Handle Material | Each | |
Hex | ||||||||
| 0.050", 1.27 mm | 4 3/4" | 1 5/8" | 3/32" | Steel | Chrome Plated | Plastic | 0000000 | 00000 |
Precise-Control Screwdriver Sets
Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
| 8 | 1/16" Hex Screwdriver—5 3/4" O'all Lg. 3/32" Hex Screwdriver—6 3/4" O'all Lg. 7/64" Hex Screwdriver—6 3/4" O'all Lg. 1/8" Hex Screwdriver—6 3/4" O'all Lg. 0.028"/0.71 mm Hex Screwdriver—4 3/4" O'all Lg. 0.035"/0.89 mm Hex Screwdriver—4 3/4" O'all Lg. 0.050"/1.27 mm Hex Screwdriver—4 3/4" O'all Lg. 5/64"/2 mm Hex Screwdriver—5 3/4" O'all Lg. | Steel | Chrome Plated | Plastic | __ | 0000000 | 000000 |
| 50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Hex Screwdrivers (Inch): 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers (Metric): 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm 5 3/4" Lg. Chip Lifter | Steel | Chrome Plated | Plastic | Metal Frame | 00000000 | 000000 |
Replaceable-Tip Precise-Control Screwdrivers
The tip can be replaced when it becomes worn. Also known as jewelers' screwdrivers, these tools have a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the driver with your fingertips.
Ball-End Precise-Control Screwdriver Sets
The assorted drivers in these sets have a ball end that allows angled entry to turn screws in hard-to-reach areas. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. These tools are also known as precision and miniature screwdrivers.
| Number of Pieces | Includes | Material | Handle Material | Max. Access Angle | Each | |
| 8 | 0.050" Hex Screwdriver—4 3/4" O'all Lg. 1/16" Hex Screwdriver—5 3/4" O'all Lg. 5/64" Hex Screwdriver—5 3/4" O'all Lg. 3/32" Hex Screwdriver—5 3/4" O'all Lg. 7/64" Hex Screwdriver—6 3/4" O'all Lg. 1/8" Hex Screwdriver—6 3/4" O'all Lg. 9/64" Hex Screwdriver—6 3/4" O'all Lg. 5/32" Hex Screwdriver—6 3/4" O'all Lg. | Chrome-Plated Steel | Plastic | 20° | 0000000 | 000000 |
Ball-End Precise-Control Screwdrivers
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas. Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. These tools are also known as precision and miniature screwdrivers.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Max. Access Angle | Each | |
Hex | ||||||||
| 0.050", 1.27 mm | 4 3/4" | 1 5/8" | 1/8" | Chrome-Plated Steel | Plastic | 20° | 0000000 | 00000 |
Replaceable-Tip Precise-Control Screwdriver Sets
Sets include an assortment of drivers with a tip that can be replaced when it becomes worn. Also known as jewelers' screwdrivers, these tools have a rotating end cap on the handle that lets you apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
| 6 | 0.028" Hex Screwdriver—4" O'all Lg. 0.035" Hex Screwdriver—4" O'all Lg. 0.050" Hex Screwdriver—4" O'all Lg. 1/16" Hex Screwdriver—4" O'all Lg. 5/64" Hex Screwdriver—4" O'all Lg. 3/32" Hex Screwdriver—4" O'all Lg. | Steel | Black Oxide | Steel | Plastic Pouch | 0000000 | 000000 |
Static-Control Precise-Control Screwdrivers
Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
Static-dissipative drivers divert static electricity faster than antistatic drivers. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge.
Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.
For technical drawings and 3-D models, click on a part number.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Finish | Handle Material | Electrical Properties | Specifications Met | Surface Resistivity | Each | |
Hex | |||||||||||
| 0.050" | 5 5/16" | 1 5/8" | 3/32" | Steel | Chrome Plated | Plastic | Static Dissipative | IEC 61340-5-1 | 106-109 ohms-cm. | 0000000 | 000000 |
Changeable-Shaft Factory-Set Torque Screwdrivers
Choose a handle based on torque and change shafts to use a different size or drive style. Handles are factory set to ensure you reach the same torque every time. They signal with an audible click when the set torque is reached. The torque setting cannot be adjusted. Handles have a contoured ulta grip for comfort. They come with a calibration certificate that is traceable to DIN and includes the test measurements that confirm accuracy.
| Drive Size | Shaft Material | Each | |
Hex | |||
|---|---|---|---|
| 0.050" | Chrome-Plated Steel | 0000000 | 00000 |