We will reply to your message within an hour.
More
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.
The outside of these 90° angles is polished to either a brushed finish or a mirror-like finish.
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
An anodized coating on these U-channels forms a bond with the aluminum surface to improve wear and corrosion resistance.
The anodized coating on these 90° angles forms a bond with the aluminum surface to improve wear and corrosion resistance.
Easier to bend and shape than 6061 aluminum, this aluminum is good for framing, cross sections, and structures in construction and marine industries.
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed. It offers similar performance to 7075 aluminum, but it’s not as strong.
Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.
These 90° angles are zinc galvanized for good corrosion resistance.
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.
Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals.
Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's commonly known as Lexan, Hyzod, Tuffak, and Makrolon.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.
Slide these bars under heavy objects for prying, lifting, and positioning jobs.
Sets include four pry bars with a mix of end styles for a variety of prying, lifting, and positioning jobs.
For a comfortable grip, these pry bars have a plastic handle.
Sets include three pry bars with a plastic handle for a comfortable grip.
Lift and pry small objects, such as electronic and circuit board-mounted components. These tools are also known as chip lifters.
One end of these pry bars is aluminum-bronze coated to prevent scratching. Often used to separate die blocks, they're also known as die bars.
The claw-shaped end grips and extracts nails, tacks, and brads. Also known as claw bars.
The plastic handle provides a comfortable grip.
The head grips and extracts nails, tacks, and brads. Also known as claw bars.
Made of aluminum-bronze that is Factory Mutual approved, these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
An insulated handle protects against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.
These tools are often used for lifting and aligning machinery or to separate pipe flanges. They’re also known as banana wedges.
These tools are often used for lifting and aligning machinery or to separate pipe flanges. Also known as banana wedges.
Use these tools for leverage when removing vehicle tires.
The 20° offset head provides clearance when reaching over obstructions.
Fasten quickly with these crank-style handles.
The L shape provides clearance when reaching over obstructions.
An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.
Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.
Unlike similar U-channels, these GPO3 fiberglass hat channels have flanges for mounting to flat surfaces. Use them to route and insulate wire in humid environments.
Made with a flame-retardant resin, this FRP fiberglass meets ASTM E84 Class A.
Lighter than aluminum while remaining rigid, these angles are often used as brackets in structural framing, machinery, and robotics.
Often used to make railings, edge covers, and other structural framing parts, these carbon fiber U-channels add stiffness and strength to applications without adding a lot of weight.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.
Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge.
In addition to creating space inside walls or ceilings—to prevent dampness or make room for insulation—these channels can also be used to level or resurface them.
These locking bars have hinges and swing out of the way for easy access to cabinet drawers.
The open top allows U-channels to slide over an edge. Use them as seals and trim.
Seal and cushion corners with these 90° angles.
FDA compliant and NSF/ANSI 51 certified, these 90° angles are approved for direct contact with food.
These 90° angles meet UL 94V0 for flame retardance.
With nearly twice the tensile strength of standard high-temperature silicone, these 90° angles absorb shock better and last longer.
Resistant to sunlight, ozone, and water, these 90° angles are good for sealing and cushioning corners.
The open top allows these foam U-channels to slide over and cushion an edge.
Provide safety and support for users with limited mobility.
Hang damp towels to air-dry.
Pry, chisel, and scrape with one tool.
Made of aluminum-bronze, these scrapers are FM approved for use in hazardous environments. They're nonmagnetic, corrosion-resistant, and inhibit sparking.
Secure square-shank tools to a lathe.
Make stairs and ramps safe and accessible for all with these ADA-compliant railings.
Safely replace worn pneumatic tires.