Adjustable-Width Sheet Metal Benders for Bench Vises
Shape sheet metal using your bench vise as a sturdy base. Remove or slide the four dies along the clamping bar to form angles, channels, boxes, trays, and pans in a variety of widths. Unlike bench-top and floor-mount benders, these are not permanently mounted—pull them out when you need them and store them when you don’t.
Base | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Bending Wd. | For Max. Steel Thick. | For Jaw Wd. | Ht. | Wd. | Dp. | Max. Box Dp. | Frame Material | Ht. | Wd. | Dp. | Handle Grip Material | Includes | Each | |
For Aluminum, Copper, Stainless Steel, Steel | ||||||||||||||
| 12 1/2" | 1/16" | 4"-8" | 11" | 13" | 2" | 1" | Steel | 1" | 9 1/2" | 1/2" | Rubber | One 1" Wide Forming Die, One 2 7/8" Wide Forming Die, One 2" Wide Forming Die, One 5 7/8" Wide Forming Die | 0000000 | 0000000 |
Floor-Mount Adjustable-Width Sheet Metal Benders
Reinforced construction lets this bender handle thicker material than the bench-top model. Position the movable forming dies, also known as fingers, to make boxes, trays, and pans in different widths. An adjustable upper leaf and nose bar allow for radius bending.
Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Bending Wd. | For Max. Steel Thick. | Min. Reverse Bend | Ht. | Wd. | Dp. | Max. Box Dp. | Frame Material | Mounting Fasteners Included | No. of | Dia. | Includes | Each | |
For Aluminum, Stainless Steel, Steel | |||||||||||||
| 48 1/4" | 1/16" | 1/4" | 53" | 72" | 36" | 4" | Steel | No | 4 | 5/8" | Five 2" Wide Forming Dies Six 3" Wide Forming Dies Five 4" Wide Forming Dies Removable Apron Insert Apron Stop Rod Counterweights | 0000000 | 000000000 |
Bench-Top Adjustable-Width Sheet Metal Benders
Position the movable forming dies, also known as fingers, to make boxes, trays, and pans in different widths. An adjustable upper leaf and nose bar allow for radius bending.
Sheet Metal Bender | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Optional 26" Ht. Floor Stand | |||||||||||||||
| Max. Bending Wd. | For Max. Steel Thick. | Min. Reverse Bend | Ht. | Wd. | Dp. | Max. Box Dp. | Frame Material | Mounting Fasteners Included | No. of | Dia. | Handle Grip Material | Includes | Each | Each | ||
For Aluminum, Stainless Steel, Steel | ||||||||||||||||
| 48 1/4" | 3/64" | 1/4" | 25" | 65" | 22" | 4" | Steel | No | 4 | 1/2" | Plastic | Five 2" Wide Forming Dies Six 3" Wide Forming Dies Five 4" Wide Forming Dies Removable Apron Insert Apron Stop Rod Counterweights | 0000000 | 000000000 | 0000000 | 0000000 |
Economy Sheet Metal Benders
Make bends up to 90° in metal sheets to form items such as boxes and trays. Benders attach to your bench top and have a brake bar that adjusts for different stock thicknesses and bend angles.
Sheet Metal Benders
Make bends up to 135° in metal sheets. Benders have a clearance of 4" for insertion and removal of large workpieces such as vehicle panels and duct work. They attach to your bench top and have a removable front edge to make bends that are close together.
Sheet Metal Benders | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Bending | Mounting Holes | Floor Stands | ||||||||||||
| Wd. | Angle | For Max. Steel Thick. | Ht. | Wd. | Dp. | Clearance | Frame Material | Mounting Fasteners Included | No. of | Dia. | Each | Each | ||
For Aluminum, Stainless Steel, Steel | ||||||||||||||
| 24" | 135° | 3/64" | 9" | 32" | 15" | 4" | Steel | No | 3 | 3/8" | 0000000 | 0000000 | 0000000 | 0000000 |
| 37" | 135° | 3/64" | 9" | 45" | 15" | 4" | Steel | No | 3 | 3/8" | 0000000 | 000000 | 0000000 | 000000 |
Hand-Held Sheet Metal Benders for Long Folds
Create long, uniform folds on the edges of sheet metal. Insert the end of a sheet into either side of these tools to form 3/8" or 1" deep folds.
Combination Sheet Metal Shears, Benders, and Curvers
Save space in your shop by cutting, bending, and curving sheet metal with a single machine. Also known as shear brake rolls. Use the blade on the shear to make clean, straight cuts; it has two cutting edges for twice the life. A press brake makes bends up to 90°. Create curves and circles with the slip roll.
When using the shear or press brake, set the manual back gauge to precisely position the sheet metal for consistent cuts or bends.
Max. Bending | For Max. Thick. | Roller | Mounting Holes | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Angle | Aluminum | Brass | Copper | Stainless Steel | Steel | Min. Bending Radius | Cut Lg. | Ht. | Wd. | Dp. | Dia. | No. of | Blade Material | Mounting Fasteners Included | No. of | Dia. | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | |||||||||||||||||||
| 12" | 90° | 1/32" | 1/32" | 1/32" | 1/64" | 1/32" | 3/4" | 12" | 15" | 14" | 11" | 1 1/2" | 3 | Steel | No | 4 | 0.32" | 0000000 | 0000000 |
| 30" | 90° | 3/64" | 1/32" | 1/32" | 1/64" | 1/32" | 3/4" | 30" | 23" | 32 1/2" | 14 1/2" | 1 1/2" | 3 | Steel | No | 4 | 0.32" | 0000000 | 00000000 |
| 40" | 90° | 3/64" | 1/32" | 1/32" | 1/64" | 1/32" | 7/8" | 40" | 23" | 42 1/2" | 14 1/2" | 1 5/8" | 3 | Steel | No | 4 | 0.32" | 0000000 | 00000000 |
Hand-Held Sheet Metal Benders for Making Corners
Fold corners in flat metal sheets to create your own bin boxes, drip pans, and other three-dimensional objects. Similar to tucking the corners of a bedsheet, these benders twist and wrap the metal into triangle-shaped folds to form corners. Finish the fold by creasing it with a regular hand-held sheet metal bender.
Style A benders have a longer throat depth for making deeper corners. They create corners in any angle.
Style B benders form precise 45° or 90° corners. They have a finger hole for additional gripping options.
Hand-Held Sheet Metal Benders for Opening Seams
Open sheet metal seams without cutting. The jaws slide under seams to pry the sheets apart. Because you’ve unfolded the sheet metal instead of cutting it, you can reuse both panels.
| Jaw Wd. | Lg. | Material | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | ||||
|---|---|---|---|---|
| 1 1/4" | 10" | Steel | 0000000 | 0000000 |
Hand-Held Sheet Metal Benders for Large Sheets
Make deep folds in roofing panels and other large pieces of sheet metal. Set the throat depth up to 19 5/8". Unlike bench-mount benders, these lightweight benders are easily moved from place to place.
| Throat Dp. | Jaw Wd. | For Max. Steel Thick. | Max. Bending Angle | Lg. | Ht. | Material | Each | |
For Aluminum, Stainless Steel, Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3 1/8"-19 5/8" | 19 5/8" | 1/64" | 150° | 31 1/2" | 4 1/4" | Steel | 0000000 | 0000000 |
Depth-Measuring Sheet Metal Benders and Crimpers
The jaws have V-notches in 1/4" increments to measure the depth of bends.
| Throat Dp. | Notch Increments | Jaw Wd. | Lg. | Material | Each | |
| 1 1/4" | 1/4", 1/2", 3/4", 1", 1 1/4" | 3 1/4" | 8" | Steel | 0000000 | 000000 |
Depth-Measuring Sheet Metal Benders and Crimpers for Tight Spaces
Offset handles allow you to use this tool in tight spaces. The jaws have V-notches in 1/4" increments to measure the depth of bends.
| Throat Dp. | Notch Increments | Jaw Wd. | Lg. | Material | Each | |
| 1 1/4" | 1/4", 1/2", 3/4", 1", 1 1/4" | 3 1/4" | 9" | Steel | 0000000 | 000000 |
Tear-Preventing Sheet Metal Benders and Crimpers
Rounded jaws reduce damage to aluminum and other lightweight metal.
| Throat Dp. | Jaw Wd. | Lg. | Material | Each | |
| 1" | 3 1/2" | 8" | Steel | 0000000 | 000000 |
Tight-Grip Sheet Metal Benders and Crimpers
These tools lock onto your material to prevent them from opening while bending and crimping.
| Throat Dp. | Jaw Wd. | Lg. | Material | Each | |
| 1 3/4" | 3 1/8" | 8" | Steel | 0000000 | 000000 |