We will reply to your message within an hour.
These pulleys spin freely on built-in bearings to maintain tension for reduced wear and vibration.
Also known as paper-plant pulleys, these are made of a paper-fiber composite that minimizes belt slippage and wear.
Keep high torque drive (HTD) timing belt systems running tightly with these idler pulleys. Made with built-in, free-spinning ball bearings, they're installed on shafts or belt tensioners to remove slack from timing belts.
Move belts forward and backward or stop and start them in precise positions, especially in areas where rust is a concern.
These HTD (high torque drive) pulleys have a curved tooth shape that provides higher strength than trapezoidal teeth.
Mount these high torque drive (HTD) pulleys onto a hex shaft.
For higher speed or higher torque applications, these GT series timing belt pulleys provide a more precise fit than HTD pulleys. Use them where accuracy is critical, such as in storage and retrieval systems or in robotics.
Teeth are curved and set in an offset pattern for high strength with 25% less operating noise than pulleys and belts with trapezoidal teeth.
Curved teeth with a high pitch provide superior load distribution and reduce wear. They mount with a bushing for a more secure grip on the shaft than set screws.
Pulleys are anodized aluminum, which is more corrosion resistant than steel.
Pulleys are XL series (extra light) and have trapezoidal teeth.
Acetal and aluminum construction makes these pulleys useful in for weight-sensitive applications.
Add these free-spinning pulleys to your timing belt setup to minimize vibration and keep belts from wearing out.
These L series (light) pulleys and have trapezoidal teeth.
Carry heavy loads without slippage—pulleys mount with a bushing for a more secure grip on the shaft than set screws.
Made from polycarbonate, these pulleys are useful in applications with weight constraints.
Anodized aluminum has good corrosion resistance.
Made of aluminum, these pulleys have good corrosion resistance.
Move heavy loads without slippage—pulleys mount with a bushing for a more secure grip on the shaft than set screws.
Pulleys are H series (heavy) and have trapezoidal teeth.
To prevent slippage while moving extra heavy loads, these pulleys mount with a bushing for a more secure grip on the shaft than set screws and press-fit pulleys.
Made of iron, these pulleys are strong enough to carry extra heavy loads.
Securely carry heavy loads—these pulleys mount with a bushing for a better grip on the shaft than set screws and press-fit pulleys.
Machine your own timing belt pulleys to fit the exact width and shaft diameter needed.
These pulleys spin freely on built-in ball bearings to maintain tension for reduced wear and vibration.
These pulleys are cast iron.
Choose from nylon, UHMW, and zinc.
A built-in spring maintains tension on your belt.
Increase efficiency, vary speed, and extend the life of your drive by changing the pitch on these pulleys.
Also known as step-cone pulleys, these have multiple groove sizes so you can quickly change rotation speed by moving your belt to a different groove.
Use these pulleys with compatible quick-disconnect bushings.
These pulleys have the same sizing versatility as quick-disconnect pulleys, but they create a tighter grip on bushings for use in high-torque applications.
Mount these pulleys with a taper-lock bushing for a tight, wobble-free hold on your shaft.
Mount these pulleys directly onto a shaft to transmit rotary motion and torque.
A rubber coating, also known as lagging, increases friction for a better grip on the belt.
Replace worn or damaged pulleys or create new belt conveyors.
The corrosion-resistant stainless steel construction makes these pulleys suitable for washdown applications.
Separate ferrous and nonferrous material in your line. These pulleys are often used to keep metal scraps from contaminating production lines, or for sorting applications such as recycling.
Idler wheels keep the belt moving and prevent sagging.
Sprockets transmit power to drive belting.
Choose these sprockets when you need to expand your Ammeraal Beltech MPB conveyor line or replace its worn sprockets.
Slide these coating strips into metal retainers that you attach to your pulley—they add friction that helps conveyor belts stay on pulleys and are replaceable when they’re worn.
These rollers have diameters 1 3/4" and below.
All stainless steel construction makes these rollers suitable for washdown applications. They have 2 1/2" diameters.
Choose the width you need from 6" to 60" in 1/16" increments.
Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.
Rollers have a standard 1.9" diameter to fit most roller conveyors.
Rollers have diameters between 2" and 4".
These rollers have diameters 1 3/8" and below.
Rollers have maintenance-free, precision bearings to reduce conveyor noise.
Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.
These rollers have 0.78" diameters.
Improve tracking on curved conveyor sections. Rollers taper so packages maintain their orientation through the curve.
Rollers move in one direction so they won't roll back when idle, keeping packages in place.
Rollers are tapered for use on curved conveyor sections.
Connect to other rollers with two grooves to power a gravity conveyor or build a custom powered conveyor.
Rollers are grooved to accommodate round belts on line-shaft conveyors.
We'll get the between frame width and groove spacing you need in 1/16" increments.
Replace rollers on a chain-driven conveyor.
We'll get the between frame width and sprocket spacing you need in 1/16" increments.
Machine your own gears to fit the exact face width and shaft diameter required.