Wrap-Around Heaters for Pails and Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/354/3545k44p2-c04b-digital@halfx_637058134990033738.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/354/3545k54p2-c04b-digital@halfx_637058135157102242.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-i116-5-15ml2-7196k41l2-d01b--8fe3646beca1610387533-p9@halfx_637459627589582848.png?ver=imagenotfound)
Also known as band heaters, these wrap around containers to warm contents without direct contact. An adjustable thermostat automatically turns the heater on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the dial. The spring-loaded clamp closure allows heaters to expand to fit around slightly larger container diameters. Do not use these heaters with flammable materials or in hazardous areas.
9 1/2" wide heaters maximize surface area contact and heat distribution.
Expansion straps for 9 1/2" wide heaters (not included) allow the heaters to fit around containers 1 1/2" to 11" larger in diameter. Two expansion straps are required for each heater.
For Container | O'all | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Dia. | Lg. | Wd. | Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | Thick. | Electrical Connection Type | NEMA Style | Wire Lead Lg. | Material | Each | |
For Metal Containers | |||||||||||||||
50° to 425° F Temp. Control Range | |||||||||||||||
5 | 11 1/8" | 35" | 4" | 550 | 4 | 120V AC | Single | 4.6 | 0.125" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 0000000 |
5 | 11 1/4" | 31" | 3" | 300 | 4.1 | 120V AC | Single | 2.5 | 0.095" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
15 | 14" | 44" | 4" | 700 | 4 | 120V AC | Single | 5.8 | 0.125" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
15 | 14" | 44" | 4" | 700 | 4 | 240V AC | Single | 2.9 | 0.125" | Hardwire | __ | 72" | Silicone Rubber | 0000000 | 000000 |
15 | 14 1/2" | 38" | 3" | 500 | 4.7 | 120V AC | Single | 4.2 | 0.095" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
30 | 18 1/4" | 52" | 3" | 750 | 5.9 | 120V AC | Single | 6.3 | 0.095" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
30 | 18 9/16" | 58 1/2" | 4" | 1,000 | 4 | 120V AC | Single | 8.3 | 0.125" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
30 | 18 9/16" | 58 1/2" | 4" | 1,000 | 4 | 240V AC | Single | 4.2 | 0.125" | Hardwire | __ | 72" | Silicone Rubber | 0000000 | 000000 |
55 | 22 3/8" | 70" | 4" | 1,200 | 4 | 120V AC | Single | 10 | 0.125" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
55 | 22 3/8" | 70" | 4" | 1,200 | 4 | 240V AC | Single | 5 | 0.125" | Hardwire | __ | 72" | Silicone Rubber | 0000000 | 000000 |
55 | 22 1/2" | 64" | 3" | 1,000 | 6.4 | 120V AC | Single | 8.3 | 0.095" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
55 | 22 1/2" | 64" | 3" | 1,000 | 6.4 | 240V AC | Single | 4.2 | 0.095" | Hardwire | __ | 72" | Silicone Rubber | 0000000 | 000000 |
For Metal, Plastic, or Fiberglass Containers | |||||||||||||||
70° to 140° F Temp. Control Range | |||||||||||||||
5 | 11 1/2" | 35" | 9 1/2" | 300 | 1.04 | 120V AC | Single | 2.5 | 0.11" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
55 | 22 1/2" | 70 9/16" | 9 1/2" | 750 | 1.2 | 120V AC | Single | 6.3 | 0.11" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
70° to 190° F Temp. Control Range | |||||||||||||||
5 | 11 1/2" | 35" | 9 1/2" | 1,000 | 2.95 | 120V AC | Single | 8.3 | 0.11" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
15 | 13 1/2" | 43 1/2" | 9 1/2" | 1,000 | 2.42 | 120V AC | Single | 8.3 | 0.11" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
55 | 22 1/2" | 70 9/16" | 9 1/2" | 1,500 | 2.39 | 120V AC | Single | 12.5 | 0.11" | Plug | 5-15 | __ | Silicone Rubber | 0000000 | 000000 |
For Plastic Containers | |||||||||||||||
50° to 160° F Temp. Control Range | |||||||||||||||
5 | 11 1/8" | 35" | 4" | 150 | 1 | 120V AC | Single | 1.3 | 0.125" | Plug | 5-15 | __ | Silicone Rubber | 00000000 | 000000 |
15 | 14" | 44" | 4" | 200 | 1 | 120V AC | Single | 1.7 | 0.125" | Plug | 5-15 | __ | Silicone Rubber | 00000000 | 000000 |
30 | 18 9/16" | 58 1/2" | 4" | 250 | 1 | 120V AC | Single | 2.1 | 0.125" | Plug | 5-15 | __ | Silicone Rubber | 00000000 | 000000 |
55 | 22 3/8" | 70" | 4" | 300 | 1 | 120V AC | Single | 2.5 | 0.125" | Plug | 5-15 | __ | Silicone Rubber | 00000000 | 000000 |
55 | 22 3/8" | 70" | 4" | 300 | 1 | 240V AC | Single | 1.3 | 0.125" | Hardwire | __ | 72" | Silicone Rubber | 00000000 | 000000 |
Expansion Straps for 9 1/2" Wide Heaters | 0000000 | Each | 000000 |
Adjustable-Diameter Wrap-Around Heaters for Pails and Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/806/8063t532p2-c04b-digital@halfx_637058087028751386.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/806/8063t531p2-c04b-digital@halfx_637058154365366818.png?ver=imagenotfound)
Nonstandard-size containers are no problem—use the hook-and-loop closure to adjust these heaters to fit a range of diameters. They wrap around containers to heat contents without direct contact. All require a temperature switch or controller (sold separately) to regulate heat output. Do not use with flammable materials or in hazardous areas.
O'all | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container Dia. | Lg. | Wd. | Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | Thick. | Max. Heat Output, °F | For Surface Material | Material | Each | |
With Wire Leads | |||||||||||||
2" to 4" | 20" | 4" | 200 | 2.5 | 240V AC | Single | 0.9 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 0000000 |
6" to 8" | 32" | 4 7/8" | 400 | 2.5 | 240V AC | Single | 1.8 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 000000 |
10" to 12" | 50" | 5 7/8" | 575 | 2.5 | 240V AC | Single | 2.6 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 000000 |
14" to 16" | 65" | 8" | 1,300 | 2.5 | 240V AC | Single | 5.9 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 000000 |
18" to 20" | 82" | 10" | 2,000 | 2.5 | 240V AC | Single | 9 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 00000000 |
With Plug | |||||||||||||
2" to 4" | 20" | 4" | 200 | 2.5 | 120V AC | Single | 1.7 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 000000 |
6" to 8" | 32" | 4 7/8" | 400 | 2.5 | 120V AC | Single | 3.3 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 000000 |
10" to 12" | 50" | 5 7/8" | 575 | 2.5 | 120V AC | Single | 4.8 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 000000 |
14" to 16" | 65" | 8" | 1,300 | 2.5 | 120V AC | Single | 10.8 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 000000 |
18" to 20" | 82" | 10" | 2,000 | 2.5 | 120V AC | Single | 16.7 | 0.07" | 375° | Fiberglass, Metal | Silicone Rubber | 00000000 | 00000000 |
Heavy Duty Wrap-Around Heaters for Pails and Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/352/3526k57p2-c04b-digital@halfx_637058155638495580.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/355/3552k74p2-c04b-digital@halfx_637058099012980301.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-i116-5-15ml2-7196k41l2-d01b--8fe3646beca1610387533-p9@halfx_637459627589582848.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i11/i114-5-20plugl2-d01b--2b6971adb361610047070-p9@halfx_637456222764131931.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i15/i153-6-15_1master--2d3f182abe91610387955-p9@halfx_637459631596039675.png?ver=imagenotfound)
For applications requiring high heat over long periods of time, these aluminized steel heaters warm up faster and are more durable than silicone rubber heaters. They wrap around containers to heat contents without direct contact. Heaters should be positioned at the base of the pail or drum. The spring-loaded clamp closure allows heaters to expand to fit around slightly larger container diameters. Heaters are not for use with flammable materials or in hazardous areas.
Heaters with three output settings have a dial to select low, medium, or high watt density.
Nonadjustable thermostat automatically turns the heater on when the temperature drops below the factory-set temperature and off when it rises above the factory-set temperature. The thermostat keeps the heater temperature at or below 165° F. Adjustable thermostats automatically turn the heater on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the dial.
Time-cycle controllers constantly cycle on and off to maintain your set temperature with less fluctuation than thermostats. Turn the dial to adjust the ratio of on to off time. Controllers require a thermometer (sold separately) for calibration and temperature monitoring.
For Container | O'all | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Dia. | Lg. | Wd. | Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | Thick. | NEMA Style | For Surface Material | Each | |
Nonadjustable Thermostat—With One Output Setting | |||||||||||||
165° F Max. Heat Output | |||||||||||||
55 | 22 1/2" | 67 5/8" | 9 1/4" | 800 | 1.71 | 120V AC | Single | 6.6 | 3/16" | 5-15 | Plastic | 0000000 | 0000000 |
Adjustable Thermostat—With Three Output Settings | |||||||||||||
200° to 400° F Temp. Control Range | |||||||||||||
5 | 11 1/4" | 33 3/8" | 5" | 1,500 | 3 6 12 | 120V AC | Single | 12.5 | 11/16" | 5-15 | Metal | 0000000 | 000000 |
16 | 14 1/2" | 43 1/2" | 5" | 1,500 | 2.35 4.69 9.38 | 120V AC | Single | 12.5 | 11/16" | 5-15 | Metal | 0000000 | 000000 |
30 | 18 1/2" | 54 7/8" | 5" | 1,920 | 2.4 4.8 9.6 | 120V AC | Single | 16 | 11/16" | 5-20 | Metal | 0000000 | 000000 |
55 | 22 1/2" | 67 5/8" | 5" | 1,750 | 1.69 3.37 6.73 | 120V AC | Single | 14.6 | 11/16" | 5-15 | Metal | 0000000 | 000000 |
55 | 22 1/2" | 67 5/8" | 5" | 1,920 | 1.85 3.7 7.4 | 120V AC | Single | 16 | 11/16" | 5-20 | Metal | 0000000 | 000000 |
55 | 22 1/2" | 67 5/8" | 5" | 3,000 | 2.88 5.77 11.54 | 240V AC | Single | 12.5 | 11/16" | 6-15 | Metal | 0000000 | 000000 |
60° to 250° F Temp. Control Range | |||||||||||||
5 | 11 1/4" | 33 3/8" | 5" | 1,500 | 3 6 12 | 120V AC | Single | 12.5 | 11/16" | 5-15 | Metal | 0000000 | 000000 |
16 | 14 1/2" | 43 1/2" | 5" | 1,500 | 2.35 4.69 9.38 | 120V AC | Single | 12.5 | 11/16" | 5-15 | Metal | 0000000 | 000000 |
30 | 18 1/2" | 54 7/8" | 5" | 1,920 | 2.4 4.8 9.6 | 120V AC | Single | 16 | 11/16" | 5-20 | Metal | 0000000 | 000000 |
55 | 22 1/2" | 67 5/8" | 5" | 1,750 | 1.69 3.37 6.73 | 120V AC | Single | 14.6 | 11/16" | 5-15 | Metal | 0000000 | 000000 |
55 | 22 1/2" | 67 5/8" | 5" | 1,920 | 1.85 3.7 7.4 | 120V AC | Single | 16 | 11/16" | 5-20 | Metal | 0000000 | 000000 |
55 | 22 1/2" | 67 5/8" | 5" | 3,000 | 2.88 5.77 11.54 | 240V AC | Single | 12.5 | 11/16" | 6-15 | Metal | 0000000 | 000000 |
Time-Cycle Controller—With Three Output Settings | |||||||||||||
500° F Max. Heat Output | |||||||||||||
5 | 11 1/4" | 33 3/8" | 5" | 1,500 | 3 6 12 | 120V AC | Single | 12.5 | 11/16" | 5-15 | Metal | 0000000 | 000000 |
16 | 14 1/2" | 43 1/2" | 5" | 1,500 | 2.35 4.69 9.38 | 120V AC | Single | 12.5 | 11/16" | 5-15 | Metal | 0000000 | 000000 |
30 | 18 1/2" | 54 7/8" | 5" | 1,750 | 2.18 4.38 8.75 | 120V AC | Single | 14.6 | 11/16" | 5-20 | Metal | 0000000 | 000000 |
55 | 22 1/2" | 67 5/8" | 5" | 1,750 | 1.68 3.36 6.73 | 120V AC | Single | 14.6 | 11/16" | 5-20 | Metal | 0000000 | 000000 |
55 | 22 1/2" | 67 5/8" | 5" | 3,000 | 2.88 5.77 11.54 | 240V AC | Single | 12.5 | 11/16" | 6-15 | Metal | 0000000 | 000000 |
Insulating Wrap-Around Heaters for Pails, Drums, and Totes
![](/prerenderstable/mvPRE/contents/gfx/imagecache/181/1819n103-@halfx_vtov1_1720797132.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/357/3571k21-@halfx_637370712524614953.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/181/1819n5-@halfx_637363636415008250.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/181/1819n1-rev@halfx_637363632816882664.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/357/3571k42-@halfx_637363639475635536.png?ver=imagenotfound)
Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas. Do not use in hazardous areas.
Heaters with an adjustable thermostat automatically turn on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the keypad.
Heaters with a nonadjustable thermostat output a consistent heat and turn on and off intermittently to maintain that temperature. Since you can’t change their heat output, there’s no need to monitor them and no risk of tampering, which could damage containers and their contents. Add insulated expansion strips to make heaters for 22 1/2" dia. containers fit drums with a diameter up to 24.2". They’re also needed for these heaters to fit around drums with removable lids.
Add insulated top covers to reduce heat loss and speed up heating. Covers with a through-port access flap give you easy access and further minimize heat loss.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-i172-7196k41--3261af3c3d91610569807-p9@halfx_637461453824684460.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i17/i179-nemastyle6-15--13fc0235b6d1610721110-p9@halfx_637462963135220793.png?ver=imagenotfound)
For Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dp. | Ht. | Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | Max. Heat Output, °F | NEMA Style | For Surface Material | Material | Features | Each | |
For 1- Gallon Containers | |||||||||||||||
Nonadjustable Thermostat | |||||||||||||||
6 1/2" | __ | __ | 7 1/2" | 40 | __ | 120V AC | Single | 0.38 | 100° | 5-15 | Metal, Plastic | Vinyl Plastic | __ | 00000000 | 0000000 |
For 2- Gallon Containers | |||||||||||||||
Nonadjustable Thermostat | |||||||||||||||
9 3/16" | __ | __ | 9 1/2" | 40 | __ | 120V AC | Single | 0.38 | 100° | 5-15 | Metal, Plastic | Vinyl Plastic | __ | 00000000 | 000000 |
For 5- Gallon Containers | |||||||||||||||
Adjustable Thermostat—50° to 450° F Temp. Control Range | |||||||||||||||
12 1/8" | __ | __ | 10" | 550 | __ | 120V AC | Single | 4.6 | 450° | 5-15 | Metal | Silicone/Fiberglass Blend Fabric | __ | 0000000 | 000000 |
Nonadjustable Thermostat | |||||||||||||||
11 3/4" | __ | __ | 18" | 110 | 0.25 | 120V AC | Single | 1 | 120° | 5-15 | Plastic | Vinyl Plastic | Overheat Protection | 000000 | 000000 |
11 3/4" | __ | __ | 18" | 160 | 0.5 | 120V AC | Single | 1.4 | 155° | 5-15 | Metal | Vinyl Plastic | Overheat Protection | 000000 | 000000 |
For 15- Gallon Containers | |||||||||||||||
Adjustable Thermostat—50° to 450° F Temp. Control Range | |||||||||||||||
14" | __ | __ | 26" | 870 | __ | 120V AC | Single | 7.3 | 450° | 5-15 | Metal | Silicone/Fiberglass Blend Fabric | __ | 0000000 | 000000 |
14" | __ | __ | 26" | 870 | __ | 240V AC | Single | 3.7 | 450° | 6-15 | Metal | Silicone/Fiberglass Blend Fabric | __ | 0000000 | 000000 |
Nonadjustable Thermostat | |||||||||||||||
14 1/2" | __ | __ | 25 5/16" | 320 | __ | 120V AC | Single | 2.6 | 100° | 5-15 | Metal, Plastic | Vinyl Plastic | __ | 00000000 | 000000 |
For 30- Gallon Containers | |||||||||||||||
Adjustable Thermostat—50° to 450° F Temp. Control Range | |||||||||||||||
18 5/8" | __ | __ | 29" | 1,160 | __ | 120V AC | Single | 9.7 | 450° | 5-15 | Metal | Silicone/Fiberglass Blend Fabric | __ | 0000000 | 000000 |
Nonadjustable Thermostat | |||||||||||||||
20" | __ | __ | 29 1/2" | 560 | __ | 120V AC | Single | 4.6 | 100° | 5-15 | Metal, Plastic | Vinyl Plastic | __ | 00000000 | 000000 |
For 55- Gallon Containers | |||||||||||||||
Adjustable Thermostat—50° to 160° F Temp. Control Range | |||||||||||||||
22 5/16" | __ | __ | 34" | 770 | 1 | 120V AC | Single | 6.4 | 160° | 5-15 | Plastic | Silicone/Fiberglass Blend Fabric | __ | 0000000 | 000000 |
Adjustable Thermostat—50° to 450° F Temp. Control Range | |||||||||||||||
22 5/16" | __ | __ | 34" | 1,600 | 2 | 120V AC | Single | 13.3 | 450° | 5-15 | Metal | Silicone/Fiberglass Blend Fabric | __ | 0000000 | 000000 |
22 5/16" | __ | __ | 34" | 1,600 | 2 | 240V AC | Single | 6.7 | 450° | 6-15 | Metal | Silicone/Fiberglass Blend Fabric | __ | 0000000 | 000000 |
Nonadjustable Thermostat | |||||||||||||||
22 1/2" | __ | __ | 36" | 470 | 0.25 | 120V AC | Single | 3.6 | 80° | 5-15 | Metal, Plastic | Vinyl Plastic | Overheat Protection | 000000 | 000000 |
22 1/2" | __ | __ | 36" | 500 | 0.25 | 120V AC | Single | 4 | 100° | 5-15 | Metal, Plastic | Vinyl Plastic | Overheat Protection | 000000 | 000000 |
22 1/2" | __ | __ | 36" | 540 | 0.25 | 120V AC | Single | 5 | 120° | 5-15 | Plastic | Vinyl Plastic | Overheat Protection | 000000 | 000000 |
22 1/2" | __ | __ | 36" | 780 | 0.5 | 120V AC | Single | 7 | 155° | 5-15 | Metal | Vinyl Plastic | Overheat Protection | 000000 | 000000 |
For 85- Gallon Containers | |||||||||||||||
Adjustable Thermostat—72° to 210° F Temp. Control Range | |||||||||||||||
27" | __ | __ | 37" | 1,800 | __ | 120V AC | Single | 14.5 | 210° | 5-15 | Plastic | Cordura Nylon Fabric | __ | 00000000 | 000000 |
For 275- Gallon Containers | |||||||||||||||
Nonadjustable Thermostat | |||||||||||||||
__ | 40" | 48" | 46" | 1,440 | 0.25 | 120V AC | Single | 12 | 135° | 5-15 | Fiberglass, Metal, Plastic | Vinyl Plastic | Overheat Protection, Resettable Fuse | 000000 | 00000000 |
For 330- Gallon Containers | |||||||||||||||
Nonadjustable Thermostat | |||||||||||||||
__ | 48" | 40" | 56" | 1,440 | 0.25 | 120V AC | Single | 12 | 135° | 5-15 | Fiberglass, Metal, Plastic | Vinyl Plastic | Overheat Protection | 000000 | 00000000 |
For 355- Gallon Containers | |||||||||||||||
Time-Frequency Controller | |||||||||||||||
__ | 40"-48" | 40"-48" | 36" | 1,440 | __ | 120V AC | Single | 12 | 160° | 5-15 | Metal, Plastic | Silicone/Fiberglass Blend Fabric | Overheat Protection | 0000000 | 00000000 |
__ | 40"-48" | 40"-48" | 36" | 2,880 | __ | 240V AC | Single | 12 | 160° | 6-15 | Metal, Plastic | Silicone/Fiberglass Blend Fabric | Overheat Protection | 0000000 | 00000000 |
For 415- Gallon Containers | |||||||||||||||
Time-Frequency Controller | |||||||||||||||
__ | 40"-48" | 40"-48" | 42" | 1,440 | __ | 120V AC | Single | 12 | 160° | 5-15 | Metal, Plastic | Silicone/Fiberglass Blend Fabric | Overheat Protection | 0000000 | 00000000 |
__ | 40"-48" | 40"-48" | 42" | 2,880 | __ | 240V AC | Single | 12 | 160° | 6-15 | Metal, Plastic | Silicone/Fiberglass Blend Fabric | Overheat Protection | 0000000 | 00000000 |
For 475- Gallon Containers | |||||||||||||||
Time-Frequency Controller | |||||||||||||||
__ | 40"-48" | 40"-48" | 48" | 1,440 | __ | 120V AC | Single | 12 | 160° | 5-15 | Metal, Plastic | Silicone/Fiberglass Blend Fabric | Overheat Protection | 0000000 | 00000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/357/3571k92-@halfx_637363640975132913.png?ver=imagenotfound)
Thick. | Lg. | Wd. | Material | Insulation Material | Each | |
1.2" | 36" | 6" | Silicone/Fiberglass Blend Fabric | Fiberglass | 0000000 | 0000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/357/3571k41-@halfx_637363640971108990.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/181/1819n102-@halfx_fq1m9_1720797924.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/357/3571k96-@halfx_637363641080174767.png?ver=imagenotfound)
Thick. | Dia. | Lg. | Wd. | Material | Insulation Material | Features | Each | |
For Heaters for 55-Gallon Containers | ||||||||
---|---|---|---|---|---|---|---|---|
1.2" | 22 5/16" | __ | __ | Silicone/Fiberglass Blend Fabric | Fiberglass | __ | 0000000 | 0000000 |
For Heaters for 85-Gallon Containers | ||||||||
1/2" | 27" | __ | __ | Cordura Nylon Fabric | Polyethylene Plastic | __ | 00000000 | 000000 |
For Heaters for 355-, 415-, and 475-Gallon Containers | ||||||||
0.4" | __ | 56" | 48" | Silicone/Fiberglass Blend Fabric | Fiberglass | Through-Port Access Flap | 0000000 | 000000 |
Insulating Wrap-Around Heaters for Diesel Exhaust Fluid (DEF) Totes
![](/prerenderstable/mvPRE/contents/gfx/imagecache/181/1819n11-@halfx_637363639274453933.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-i172-7196k41--3261af3c3d91610569807-p9@halfx_637461453824684460.png?ver=imagenotfound)
Extend the shelf life of your diesel exhaust fluid (DEF) while storing it in cold places. Also called heat blankets, these heaters wrap around 330 gal. DEF totes to evenly warm the fluid inside. They’re insulated with foam, so they retain heat even in chilly environments. Designed for DEF totes with a built-in pump, these heaters have an extended frame to fit the pump housing and an opening for the pump equipment. Manually set the temperature with the digital keypad. A thermostat automatically turns these heaters on and off to maintain the set temperature. To prevent overheating, a resettable fuse opens if the temperature rises above the maximum heat output.
Secure these heaters with the included buckles and straps—no need for adhesive. They’re quick to unbuckle and remove once your tote is empty. Made of heavy duty vinyl, these heaters stand up to scuffs, water, and UV rays, so they last even outdoors. The vinyl is NFPA rated for flame retardance; however, you shouldn’t use these heaters near combustible gases or dust. A ground fault circuit interrupter (GFCI) is built in to their power cord to prevent electrical shocks.
Add an insulated top cover to stop heat from escaping through the top of your tote. The cover has a flap that folds down to insulate the opening for pump equipment.
Heaters | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container | Insulated Top Covers | |||||||||||||||
Wd. | Dp. | Ht. | Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | Max. Heat Output, °F | NEMA Style | For Surface Material | Material | Features | Each | Each | ||
For 330- Gallon Containers | ||||||||||||||||
-30° to 135° F Temp. Control Range | ||||||||||||||||
48" | 40" | 56" | 1,440 | 0.25 | 120V AC | Single | 12 | 135° | 5-15 | Metal, Plastic | Vinyl Plastic | Overheat Protection, Resettable Fuse | 0000000 | 000000000 | 0000000 | 0000000 |
Noncontact Wrap-Around Heaters for Pails and Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/354/3542k97p2-c04b-digital@halfx_637058069283235592.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/354/3542k5p2-c04b-digital@halfx_637058177316608085.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-i116-5-15ml2-7196k41l2-d01b--8fe3646beca1610387533-p9@halfx_637459627589582848.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/l16/l16-20plug2-d01b-1607697188-p9@halfx_637432724112030613.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i11/i111-nemastylel6-20-1609789075-p9@halfx_637453643011656562.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i19/i198-l5-15plugl2-d01btwox1611177307-p9@halfx_637467525082218243.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/nem/nemastylel15-20--1bd1ce8008d1611773676-p9@halfx_637473488911253017.png?ver=imagenotfound)
To prevent hot spots that can damage heat-sensitive materials such as adhesives, sealants, and food, these heaters warm the air around containers without touching them. They provide uniform heat to 80% of the container. An adjustable thermostat automatically turns the heater on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the dial. Do not use these heaters with flammable materials or in hazardous areas.
Heaters for 5-gallon containers do not open; set containers in from the top.
Heaters for 55-gallon containers close around containers. They are mounted on casters.
For Container Dia. | O'all Ht. | Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | OD | Max. Heat Output, °F | NEMA Style | Cord Lg., ft. | For Surface Material | Housing Material | Insulation Material | Each | |
For 5-Gallon Containers | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
60° to 250° F Temp. Control Range | |||||||||||||||
12" | 13" | 1,350 | 81 | 120V AC | Single | 15 | 22" | 250° | 5-15 | 8 | Metal | Steel | Fiberglass | 0000000 | 000000000 |
100° to 550° F Temp. Control Range | |||||||||||||||
12" | 13" | 1,350 | 81 | 120V AC | Single | 15 | 22" | 550° | 5-15 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
12" | 13" | 1,350 | 81 | 240V AC | Single | 6 | 22" | 550° | L6-20 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
For 55-Gallon Containers | |||||||||||||||
60° to 250° F Temp. Control Range | |||||||||||||||
23 3/4" | 30 1/2" | 1,500 | 92 | 120V AC | Single | 15 | 35" | 250° | L5-15 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
23 3/4" | 30 1/2" | 4,400 | 270 | 240V AC | Three | 12 | 35" | 250° | L15-20 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
23 3/4" | 30 1/2" | 4,400 | 270 | 480V AC | Three | 6 | 35" | 250° | L16-20 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
23 3/4" | 30 1/2" | 4,400 | 337 | 240V AC | Single | 20 | 35" | 250° | L6-20 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
100° to 550° F Temp. Control Range | |||||||||||||||
23 3/4" | 30 1/2" | 4,400 | 270 | 240V AC | Three | 12 | 35" | 550° | L15-20 | 8 | Metal | Steel | Fiberglass | 000000 | 00000000 |
23 3/4" | 30 1/2" | 4,400 | 270 | 480V AC | Three | 6 | 35" | 550° | L16-20 | 8 | Metal | Steel | Fiberglass | 000000 | 00000000 |
23 3/4" | 30 1/2" | 4,400 | 337 | 240V AC | Single | 20 | 35" | 550° | L6-20 | 8 | Metal | Steel | Fiberglass | 000000 | 00000000 |
Insulating Wrap-Around Heaters for Gas Cylinders
![](/prerenderstable/mvPRE/contents/gfx/imagecache/704/7044n11@halfx_3av52_1719405422.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-i116-5-15ml2-7196k41l2-d01b--8fe3646beca1610387533-p9@halfx_637459627589582848.png?ver=imagenotfound)
Strap these heaters around cylinders to keep gas flowing when the temperature drops. Also known as heat blankets, they heat cylinders from the outside, safely warming liquefied gas enough so that it can vaporize. They’re also lined with acrylic insulation to retain heat. The thermostat is adjustable, and it automatically turns the heater on or off to keep your cylinder at a consistent temperature. They’re sized to fit industry-standard cylinders.
Made with tough Cordura fabric, these heaters resist mold and mildew, and they’re difficult to tear. Both the fabric and the NEMA 4X-rated controller are weather-resistant, so you can install these heaters on outdoor tanks. Check the current temperature on the LCD display and use the keypad to make changes. Do not use these heaters in hazardous areas.
For Tank | O'all | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. Range | Lg. | Wd. | Wattage, W | Voltage | Electrical Phase | Current, A | Thick. | NEMA Style | Cord Lg., ft. | Display | Material | Insulation Material | For Use Outdoors | Each | |
For Fiberglass, Foam, Metal, Plastic Containers | ||||||||||||||||
With Adjustable Thermostat—32° to 125° F Temp. Control Range | ||||||||||||||||
A, K | 9"- 9 1/4" | 34" | 47" | 725 | 120V AC | Single | 15 | 3/8" | 5-15 | 10 | LCD | Cordura Nylon Fabric | Acrylic | Yes | 0000000 | 0000000 |
Heaters for Extrusion- and Injection-Molding Barrels
![](/prerenderstable/mvPRE/contents/gfx/imagecache/367/3671k155c1-c04b-digital-master1570225394-p9@halfx_637058159513261913.png?ver=imagenotfound)
Heat resins, raw materials, and food with these heaters that fit around extrusion and injection-molding barrels. All require a temperature switch or controller (sold separately) to regulate heat output.
Note: The heater must be sized to fit tightly around the barrel to prevent air gaps that lead to inefficient heating and premature failure.
For technical drawings and 3-D models, click on a part number.
For Barrel OD | Wd. | Wattage, W | Max. Heat Output, °F | Wire Connection Type | Material | Current, A | Each | |
120V AC, Single Phase | ||||||||
---|---|---|---|---|---|---|---|---|
With Mica Insulation | ||||||||
3" | 1 1/2" | 400 | 900° | Screw Terminals | Steel | 3.3 | 00000000 | 000000 |
3 1/2" | 1 1/2" | 500 | 900° | Screw Terminals | Steel | 4.2 | 00000000 | 00000 |
3 1/2" | 2" | 650 | 900° | Screw Terminals | Steel | 5.4 | 00000000 | 00000 |
4" | 1" | 400 | 900° | Screw Terminals | Steel | 3.3 | 00000000 | 00000 |
4" | 2" | 550 | 900° | Screw Terminals | Steel | 4.6 | 00000000 | 00000 |
4" | 4" | 1,250 | 900° | Screw Terminals | Steel | 10.4 | 00000000 | 000000 |
4 1/2" | 2 1/2" | 1,000 | 900° | Screw Terminals | Steel | 8.3 | 00000000 | 00000 |
5" | 1 1/2" | 700 | 900° | Screw Terminals | Steel | 5.8 | 00000000 | 00000 |
6" | 1 1/2" | 850 | 900° | Screw Terminals | Steel | 7.1 | 00000000 | 00000 |
6" | 2" | 1,200 | 900° | Screw Terminals | Steel | 10 | 00000000 | 00000 |
7" | 1 1/2" | 1,000 | 900° | Screw Terminals | Steel | 8.3 | 00000000 | 00000 |
8" | 2" | 1,500 | 900° | Screw Terminals | Steel | 12.5 | 00000000 | 000000 |
9" | 1 1/2" | 1,200 | 900° | Screw Terminals | Steel | 10 | 00000000 | 000000 |
10" | 1 1/2" | 1,300 | 900° | Screw Terminals | Steel | 10.8 | 00000000 | 000000 |
12" | 2" | 1,700 | 900° | Screw Terminals | Steel | 14.2 | 00000000 | 000000 |
14" | 1 1/2" | 1,600 | 900° | Screw Terminals | Steel | 13.3 | 00000000 | 000000 |
240V AC, Single Phase | ||||||||
With Mica Insulation | ||||||||
3" | 1 1/2" | 400 | 900° | Screw Terminals | Steel | 1.7 | 00000000 | 00000 |
3 1/2" | 1 1/2" | 500 | 900° | Screw Terminals | Steel | 2.1 | 00000000 | 00000 |
3 1/2" | 2" | 650 | 900° | Screw Terminals | Steel | 2.7 | 00000000 | 00000 |
4" | 1" | 400 | 900° | Screw Terminals | Steel | 1.7 | 00000000 | 00000 |
4" | 2" | 550 | 900° | Screw Terminals | Steel | 2.3 | 00000000 | 00000 |
4" | 4" | 1,250 | 900° | Screw Terminals | Steel | 5.2 | 00000000 | 000000 |
4 1/2" | 2 1/2" | 1,000 | 900° | Screw Terminals | Steel | 4.2 | 00000000 | 00000 |
5" | 1 1/2" | 700 | 900° | Screw Terminals | Steel | 2.9 | 00000000 | 00000 |
6" | 1 1/2" | 850 | 900° | Screw Terminals | Steel | 3.5 | 00000000 | 00000 |
6" | 2" | 1,200 | 900° | Screw Terminals | Steel | 5 | 00000000 | 00000 |
7" | 1 1/2" | 1,000 | 900° | Screw Terminals | Steel | 4.2 | 00000000 | 00000 |
8" | 2" | 1,500 | 900° | Screw Terminals | Steel | 6.3 | 00000000 | 000000 |
9" | 1 1/2" | 1,800 | 900° | Screw Terminals | Steel | 7.5 | 00000000 | 000000 |
10" | 1 1/2" | 1,300 | 900° | Screw Terminals | Steel | 5.4 | 0000000 | 000000 |
12" | 2" | 2,300 | 900° | Screw Terminals | Steel | 9.6 | 00000000 | 000000 |
14" | 1 1/2" | 1,900 | 900° | Screw Terminals | Steel | 7.9 | 00000000 | 000000 |
Heaters for Nozzles
![](/prerenderstable/mvPRE/contents/gfx/imagecache/359/3594k117c1-c04b-digital-master1570225342-p9@halfx_637058162091089959.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/359/3594k252c1-c04b-digital-master1570225342-p9@halfx_637058163698925166.png?ver=imagenotfound)
Often used with extrusion, injection, and blow-molding machinery, these heaters clamp around nozzles to keep material warm for consistent discharge. They require a temperature switch or controller (sold separately) to regulate heat output.
Heaters with mineral insulation heat up faster than heaters with mica insulation.
Note: The heater must be sized to fit tightly around the barrel to prevent air gaps that lead to inefficient heating and premature failure.
For technical drawings and 3-D models, click on a part number.
Wire Lead | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Nozzle OD | Wd. | Wattage, W | Max. Heat Output, °F | Lg. | OD | Covering Material | Material | Current, A | Each | |
120V AC, Single Phase | ||||||||||
With Mica Insulation | ||||||||||
1" | 1" | 100 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.8 | 00000000 | 0000000 |
1" | 1 1/2" | 150 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 000000 |
1" | 2" | 200 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.7 | 00000000 | 000000 |
1 1/2" | 1" | 150 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 000000 |
1 1/2" | 1 1/2" | 300 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 2.5 | 00000000 | 000000 |
1 1/2" | 2" | 300 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 2.5 | 00000000 | 000000 |
2" | 1 1/2" | 300 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 2.5 | 00000000 | 000000 |
2 1/2" | 1 1/2" | 350 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 2.9 | 00000000 | 000000 |
With Mineral Insulation | ||||||||||
1" | 1" | 150 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.3 | 00000000 | 000000 |
1" | 1 1/2" | 200 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.7 | 00000000 | 000000 |
1 1/2" | 1" | 225 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.9 | 00000000 | 000000 |
1 1/2" | 1 1/2" | 350 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 2.9 | 00000000 | 000000 |
1 1/2" | 2" | 400 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 3.3 | 00000000 | 000000 |
2" | 1 1/2" | 425 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 3.5 | 00000000 | 000000 |
2 1/2" | 1 1/2" | 525 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 4.4 | 00000000 | 000000 |
240V AC, Single Phase | ||||||||||
With Mica Insulation | ||||||||||
1" | 1" | 100 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.4 | 00000000 | 000000 |
1" | 1 1/2" | 150 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.6 | 00000000 | 000000 |
1" | 2" | 200 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.8 | 00000000 | 000000 |
1 1/2" | 1" | 150 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.6 | 00000000 | 000000 |
1 1/2" | 1 1/2" | 300 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 000000 |
1 1/2" | 2" | 300 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 000000 |
2" | 1 1/2" | 300 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 000000 |
2 1/2" | 1 1/2" | 350 | 900° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.5 | 00000000 | 000000 |
With Mineral Insulation | ||||||||||
1" | 1 1/2" | 200 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 0.8 | 00000000 | 000000 |
1 1/2" | 1" | 225 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 0.9 | 00000000 | 000000 |
1 1/2" | 1 1/2" | 350 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.5 | 00000000 | 000000 |
1 1/2" | 2" | 400 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.7 | 00000000 | 000000 |
2" | 1 1/2" | 425 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.8 | 00000000 | 000000 |
2 1/2" | 1 1/2" | 525 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 2.2 | 00000000 | 000000 |