Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

No need for a gasket—this hose’s PTFE liner flares out as it passes through the flanges, so your line’s contents never touch the fittings.

Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings.

Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.

Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.

Move flour, grain, rice, sugar, and other dry food through your line.

Made of polyurethane, this hose lasts more than twice as long as PVC hose when moving abrasive dry food. You can monitor your line since it's clear.

The fittings are a short length of tubing that inserts into the end of another tube fitting.

Also known as an instrumentation fittings, the Yor-Lok fitting has two sleeves (double ferrules) that bite into metal tubing for a strong seal. The tube stem fitting is a short length of tubing that inserts into the end of another tube fitting.

Bend this hose in any direction and it won’t kink, even when routed through tight spaces.

The neoprene coating on this hose holds up under high heat.

Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.

In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.

A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).

The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.

Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.

Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.

Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.

Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.

If you’re tight on storage space, this hose compresses down to a small size.

Form elbows and bends with this hose and it will hold its shape without support.

SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.

A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.

A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.

The neoprene coating on this hose withstands continuous motion without weakening.

Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.

Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.

These short lengths of hose have a collar on each end to prevent the clamp from slipping off. FDA compliant for direct contact with food, they’re often used to move rice and grain.

Super thin and lightweight, this hose is economical and rolls up for easy disposal.

Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.

Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.

Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.

Bend this hose into position in heating and cooling applications where it’s important to maintain the temperature of the air inside the hose.

Run water, mist, oil, and other liquids through this hose.

A small bend radius lets this hose twist and turn to fit in cramped spaces.

Not only can this tubing handle temperatures between -450° F and 500° F, it also has a convoluted spiral design for good flexibility and smooth flow.

This sleeving stretches to fit over items for easy installation, and then tightens around its contents for a secure fit. Choose from multiple colors to organize wire and cable.

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

With excellent torsional strength, this sleeving withstands the extreme twisting found in robotics. It has impact strength similar to steel yet is lighter than most other sleeving materials. Stretch it to fit over items for easy installation; it tightens around its contents for a secure fit.

Made of PPS plastic, this sleeving shields cable, hose, and pipe from oil, acids, and other chemicals. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

Seal out dirt and dust better than standard slit sleeving—this sleeving secures shut with a closure strip. A slit along its entire length lets you install it around wire, cable, and hose that are already connected.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.

Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.

In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.

Kits contain lengths of hose, nozzles, valves, and caps.

Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.