Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

The oil in these bearings is suitable for incidental contact with food.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Use where high loads and speeds are not required.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Good for underwater applications, these bearings won’t swell or warp when wet.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.

Use these ultra-thin sleeve bearings in high-speed applications where clearance is a concern.

A mounting flange prevents movement during tightening.

Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws.