Filter by
Cage Material
Bearing Type
Ring Material
For Load Direction
Ball Material
About Ball and Roller Bearings
More
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Open
Open
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R0 | 0.047" | 5/32" | 1/16" | 440C Stainless Steel | 30 | 5 | 120,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
Shielded
Shielded
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R0-2Z | 0.047" | 5/32" | 3/32" | 440C Stainless Steel | 30 | 5 | 120,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
Precision Stainless Steel Ball Bearings
Open
Shielded
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
| R0 | 0.047" | 5/32" | 1/16" | 440C Stainless Steel | 15 | 3 | 100,000 | Lubricated | -10° to 240° | ABEC-7 | 000000 | 000000 |
Shielded | ||||||||||||
| R0-2Z | 0.047" | 5/32" | 3/32" | 440C Stainless Steel | 15 | 5 | 80,000 | Lubricated | -10° to 240° | ABEC-7 | 0000000 | 00000 |
Flanged Ball Bearings
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Open
Open
Flanged Bearing
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R0 | 0.047" | 5/32" | 1/16" | 0.203" | 0.01" | 440C Stainless Steel | 30 | 5 | 120,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
Shielded
Shielded
Flanged Bearing
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R0-2Z | 0.047" | 5/32" | 3/32" | 0.203" | 0.03" | 440C Stainless Steel | 30 | 5 | 120,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 000000 |
Shielded with Extended Inner Ring
Shielded with
Extended
Inner Ring
Extended
Inner Ring
Flanged Bearing
with Extended
Inner Ring
with Extended
Inner Ring
Flange | Inner Ring | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R0-2Z | 0.047" | 5/32" | 3/32" | 0.203" | 0.03" | 0.076" | 0.125" | 440C Stainless Steel | 30 | 5 | 120,000 | Lubricated | -20° to 250° | ABEC-5 | 00000000 | 000000 |
Precision Flanged Ball Bearings
Open
Shielded
When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings. All are 440C stainless steel for good corrosion resistance. The flange ensures proper positioning inside a tube or housing.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||||
| R0 | 0.047" | 5/32" | 1/16" | 0.203" | 0.01" | 440C Stainless Steel | 15 | 3 | 100,000 | Lubricated | -10° to 240° | ABEC-7 | 000000 | 000000 |
Shielded | ||||||||||||||
| R0-2Z | 0.047" | 5/32" | 3/32" | 0.203" | 0.03" | 440C Stainless Steel | 15 | 5 | 80,000 | Lubricated | -60° to 250° | ABEC-7 | 0000000 | 00000 |
Press-Fit Drill Bushings
Mount flush with jig plates for precise drilling. These bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Tolerance | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.0135" ID | ||||||||||||
| 5/32" | 1/4" | No. 80 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 000000 | 000000 | 000000 |
| 5/32" | 5/16" | No. 80 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 5/32" | 3/8" | No. 80 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 80 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
0.0156" ID | ||||||||||||
| 5/32" | 1/4" | 1/64" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.018" ID | ||||||||||||
| 5/32" | 1/4" | No. 77 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 77 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.02" ID | ||||||||||||
| 5/32" | 1/4" | No. 76 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 5/16" | No. 76 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 76 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.021" ID | ||||||||||||
| 5/32" | 1/4" | No. 75 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.0225" ID | ||||||||||||
| 5/32" | 1/2" | No. 74 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.025" ID | ||||||||||||
| 5/32" | 1/4" | No. 72 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 72 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.026" ID | ||||||||||||
| 5/32" | 1/4" | No. 71 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 71 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.028" ID | ||||||||||||
| 5/32" | 1/4" | No. 70 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.0292" ID | ||||||||||||
| 5/32" | 3/4" | No. 69 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.031" ID | ||||||||||||
| 5/32" | 1/4" | No. 68 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 3/4" | No. 68 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.0312" ID | ||||||||||||
| 5/32" | 1/4" | 1/32" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 3/4" | 1/32" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.032" ID | ||||||||||||
| 5/32" | 1/4" | No. 67 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 3/8" | No. 67 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 67 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.033" ID | ||||||||||||
| 5/32" | 1/4" | No. 66 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 66 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.035" ID | ||||||||||||
| 5/32" | 1/4" | No. 65 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 65 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 3/4" | No. 65 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.036" ID | ||||||||||||
| 5/32" | 1/4" | No. 64 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.039" ID | ||||||||||||
| 5/32" | 1/4" | No. 61 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.04" ID | ||||||||||||
| 5/32" | 1/4" | No. 60 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 5/16" | No. 60 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 60 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.041" ID | ||||||||||||
| 5/32" | 1/4" | No. 59 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.0465" ID | ||||||||||||
| 5/32" | 3/8" | No. 56 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 56 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 3/4" | No. 56 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.0469" ID | ||||||||||||
| 5/32" | 1/4" | 3/64" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | 3/64" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.052" ID | ||||||||||||
| 5/32" | 1/4" | No. 55 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 3/8" | No. 55 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.055" ID | ||||||||||||
| 5/32" | 1/4" | No. 54 | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
0.0625" ID | ||||||||||||
| 5/32" | 1/4" | 1/16" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 5/16" | 1/16" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 3/8" | 1/16" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | 1/16" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 5/32" | 3/4" | 1/16" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
Press-Fit Drill Bushings with Head
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole. Drill bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | OD | Thick. | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.0135" ID | ||||||||||||||
| 5/32" | 1/4" | No. 80 | 1/4" | 3/32" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 000000 | 000000 | 000000 |
| 5/32" | 3/8" | No. 80 | 1/4" | 3/32" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 5/32" | 1/2" | No. 80 | 1/4" | 3/32" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
Tight-Fit Ring Shims
For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other ring shims.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like brass, can be used as wear plates between components that rub together, preventing damage to equipment.
Stainless steel shims are more corrosion resistant than alloy steel shims.
For technical drawings and 3-D models, click on a part number.
18-8 Stainless Steel
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.001" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 000000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.002" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.003" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.004" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.005" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.006" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.008" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.01" Thick. (-0.001" to 0.001" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.012" Thick. (-0.001" to 0.001" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.014" Thick. (-0.001" to 0.003" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.016" Thick. (-0.002" to 0.002" Tolerance) | |||||||||
| 1/16" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 5/64" | 0" to 0.005" | 5/32" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |