These steel ball bearings handle higher loads than stainless steel and plastic bearings.

Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.

Bearings are 440C stainless steel for good corrosion resistance.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.

Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.

Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

A metal backing adds strength.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

The choice for low-friction motion in high-temperature environments.

Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.

Without changing the ID, these inserts handle some misalignment on rod ends.

A slippery PTFE liner reduces wear and eliminates the need for lubrication.

4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Thread these one-piece collars onto an Acme lead screw.

Insert these bushings into the bore of your sprocket for flush or recessed mounting.

A mounting flange prevents movement during tightening.

A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit.

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.